grrrrr n00b
Joined: 05 Nov 2002 Posts: 38 Location: belgium
|
Posted: Tue Jul 01, 2003 8:23 am Post subject: problem with usb-storage |
|
|
when i connect my medion MD 7425 to the usb port, I get this in dmesg:
Code: |
uhci.c: root-hub INT complete: port1: 48a port2: 495 data: 2
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 00:07.2-1 address 2
usb.c: kusbd: /sbin/hotplug remove 2
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
uhci.c: root-hub INT complete: port1: 488 port2: 495 data: 2
hub.c: port 1, portstatus 100, change 2, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
uhci.c: root-hub INT complete: port1: 493 port2: 495 data: 2
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:07.2-1, assigned address 4
usb.c: kmalloc IF c8922440, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
usb.c: unhandled interfaces on device
usb.c: USB device 4 (vend/prod 0xd96/0x410a) is not claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 2.00
Vendor:Product = 0d96:410a
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 0.01
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 10mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 03
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0008
bInterval = 01
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 03 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
usb.c: kusbd: /sbin/hotplug add 4
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 66
usb-storage: Array length appears to be: 68
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xcfce1ed4 Out: 0xcfce1ee8 Int: 0xcfce1ec0 (Period 1)
usb-storage: New GUID 0d96410a0000000000000000
usb-storage: GetMaxLUN command result is -32, data is 42
usb-storage: clearing endpoint halt for pipe 0x80000480
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 8c cb 83 d5 1d c0
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 77/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: command_abort() called
usb-storage: Bulk status result = -104
usb-storage: -- transport indicates error, resetting
usb-storage: Bulk reset requested
uhci.c: uhci_submit_urb: urb not available to submit (status = -104)
usb-storage: usb_stor_clear_halt: result=-22
uhci.c: uhci_submit_urb: urb not available to submit (status = -104)
usb-storage: usb_stor_clear_halt: result=-22
usb-storage: Bulk soft reset completed
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
|
i've got hotplug installed, but when i try to start it, it hangs
i can't even kill -9 the process??
when I do that terminal hangs too
Code: |
cat /proc/driver/uhci/hc1
HC status
usbcmd = 0008 Maxp32 EGSM
usbstat = 0020 HCHalted
usbint = 000f
usbfrnum = (0)514
flbaseadd = 0fcb8000
sof = 40
stat1 = 0580 LowSpeed
stat2 = 0580 LowSpeed
Frame List
Skeleton TD's
- skel_term_td
[cfcb71b0] link (0fcb71b0) e0 Length=0 MaxLen=7ff DT0 EndPt=0 Dev=7f, PID=69(IN) (buf=00000000)
Skeleton QH's
|
i don't get anything in /dev/usb or /dev/scsi
any ideas on this?
oh, another something weird:
Code: |
Module Size Used by Tainted: P
usb-storage 45520 1 (initializing)
snd-pcm-oss 39908 0 (autoclean)
snd-mixer-oss 13688 1 (autoclean) [snd-pcm-oss]
sg 28972 0 (autoclean) (unused)
st 29584 0 (autoclean) (unused)
sr_mod 18264 0 (autoclean) (unused)
sd_mod 11180 0 (autoclean) (unused)
scsi_mod 87412 5 (autoclean) [usb-storage sg st sr_mod sd_mod]
nvidia 1538144 10 (autoclean)
i2c-proc 7440 0
snd-via82xx 13696 1
snd-ac97-codec 40712 0 [snd-via82xx]
snd-pcm 64960 0 [snd-pcm-oss snd-via82xx]
snd-page-alloc 5404 0 [snd-via82xx snd-pcm]
snd-timer 15876 0 [snd-pcm]
snd-mpu401-uart 3776 0 [snd-via82xx]
snd-rawmidi 15072 0 [snd-mpu401-uart]
snd-seq-device 4352 0 [snd-rawmidi]
snd 32836 0 [snd-pcm-oss snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
tvaudio 12732 0 (autoclean) (unused)
bttv 68928 0
msp3400 16684 0 (autoclean) (unused)
tuner 10144 1 (autoclean)
i2c-algo-bit 8360 1 [bttv]
i2c-core 15880 0 [i2c-proc tvaudio bttv msp3400 tuner i2c-algo-bit]
soundcore 4164 3 [snd bttv]
videodev 6336 2 [bttv]
apm 10116 2
|
initializing?? |
|