View previous topic :: View next topic |
Author |
Message |
humanthing Tux's lil' helper
Joined: 29 Nov 2006 Posts: 141
|
Posted: Fri Dec 15, 2006 10:15 pm Post subject: emerge povray fails |
|
|
Hi,
I just tried to emerge povray.
But after a short time it gives an error, but i can't really figure out why... All dependencies were merged, at least I think so.
The error could be somewhere here I think:
Code: | checking whether x86_64-pc-linux-gnu-g++ accepts -O3... ./configure: line 15563: "\-O|3": command not found
./configure: line 15569: \-O|3: command not found
yes
checking whether x86_64-pc-linux-gnu-gcc accepts -O3... ./configure: line 15654: "\-O|3": command not found
./configure: line 15658: \-O|3: command not found
yes
checking whether x86_64-pc-linux-gnu-g++ accepts -msse... ./configure: line 17063: "\-m|sse": command not found
./configure: line 17069: \-m|sse: command not found
yes
checking whether x86_64-pc-linux-gnu-gcc accepts -msse... ./configure: line 17154: "\-m|sse": command not found
./configure: line 17158: \-m|sse: command not found
yes
checking whether x86_64-pc-linux-gnu-g++ accepts -mfpmath=sse... ./configure: line 17266: "\-m|fpmath=sse": command not found
./configure: line 17272: \-m|fpmath=sse: command not found
yes
checking whether x86_64-pc-linux-gnu-gcc accepts -mfpmath=sse... ./configure: line 17357: "\-m|fpmath=sse": command not found
./configure: line 17361: \-m|fpmath=sse: command not found
yes
checking whether x86_64-pc-linux-gnu-g++ accepts -msse2... ./configure: line 17471: "\-m|sse2": command not found
./configure: line 17477: \-m|sse2: command not found
yes
checking whether x86_64-pc-linux-gnu-gcc accepts -msse2... ./configure: line 17562: "\-m|sse2": command not found
./configure: line 17566: \-m|sse2: command not found
yes
checking whether x86_64-pc-linux-gnu-g++ accepts -march=k8 -mtune=k8... ./configure: line 17726: "\-m|arch=k8|\-m|tune=k8": command not found
./configure: line 17732: \-m|arch=k8|\-m|tune=k8: command not found
yes
checking whether x86_64-pc-linux-gnu-gcc accepts -march=k8 -mtune=k8... ./configure: line 17820: "\-m|arch=k8|\-m|tune=k8": command not found
./configure: line 17824: \-m|arch=k8|\-m|tune=k8: command not found
yes
checking whether x86_64-pc-linux-gnu-g++ accepts -malign-double... ./configure: line 18652: "\-m|align-double": command not found
./configure: line 18658: \-m|align-double: command not found
yes
checking whether x86_64-pc-linux-gnu-gcc accepts -malign-double... ./configure: line 18743: "\-m|align-double": command not found
./configure: line 18747: \-m|align-double: command not found
yes
checking whether x86_64-pc-linux-gnu-g++ accepts -minline-all-stringops... ./configure: line 18652: "\-m|inline-all-stringops": command not found
./configure: line 18658: \-m|inline-all-stringops: command not found
yes
checking whether x86_64-pc-linux-gnu-gcc accepts -minline-all-stringops... ./configure: line 18743: "\-m|inline-all-stringops": command not found
./configure: line 18747: \-m|inline-all-stringops: command not found
yes
Makefiles
---------
configure: creating ./config.status
config.status: creating Makefile
config.status: WARNING: Makefile.in seems to ignore the --datarootdir setting
config.status: creating libraries/Makefile
config.status: WARNING: libraries/Makefile.in seems to ignore the --datarootdir setting
config.status: creating source/base/Makefile
config.status: WARNING: source/base/Makefile.in seems to ignore the --datarootdir setting
config.status: creating source/frontend/Makefile
config.status: WARNING: source/frontend/Makefile.in seems to ignore the --datarootdir setting
config.status: creating source/Makefile
config.status: WARNING: source/Makefile.in seems to ignore the --datarootdir setting
config.status: creating unix/Makefile
config.status: WARNING: unix/Makefile.in seems to ignore the --datarootdir setting
config.status: creating conf.h
config.status: executing depfiles commands
config.status: executing config.log commands
Supporting libraries
--------------------
=== configuring in libraries/png (/var/tmp/portage/povray-3.6.1-r1/work/povray-3.6.1/libraries/png)
configure: running /bin/sh ./configure.gnu --prefix=/usr '--host=x86_64-pc-linux-gnu' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--datadir=/usr/share' '--sysconfdir=/etc' '--localstatedir=/var/lib' 'COMPILED_BY=root (on ich-ag)' '--with-x' '--without-svga' '--libdir=/usr/lib64' '--build=x86_64-pc-linux-gnu' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=x86_64-pc-linux-gnu' 'CXXFLAGS=-march=athlon64 -msse3 -O2 -pipe' 'CFLAGS=-march=athlon64 -msse3 -O2 -pipe' --cache-file=/dev/null --srcdir=.
configure.gnu: configuring libpng 1.2.5
configure.gnu: running ./configure --srcdir=. --cache-file=/dev/null --prefix=/usr --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for C compiler default output... configure: error: C compiler cannot create executables
See `config.log' for more details.
===============================================================================
POV-Ray 3.6.1 has been configured with the following features:
I/O restrictions: enabled
X Window display: enabled
SVGAlib display : disabled
Type 'make' to build, and 'make install' to install all files in the hierarchy
/usr
===============================================================================
* Building povray
make all-recursive
make[1]: Entering directory `/var/tmp/portage/povray-3.6.1-r1/work/povray-3.6.1'
Making all in libraries
make[2]: Entering directory `/var/tmp/portage/povray-3.6.1-r1/work/povray-3.6.1/libraries'
Making all in png
make[3]: Entering directory `/var/tmp/portage/povray-3.6.1-r1/work/povray-3.6.1/libraries/png'
make[3]: *** Keine Regel, um »all« zu erstellen. Schluss.
make[3]: Leaving directory `/var/tmp/portage/povray-3.6.1-r1/work/povray-3.6.1/libraries/png'
make[2]: *** [all-recursive] Fehler 1
make[2]: Leaving directory `/var/tmp/portage/povray-3.6.1-r1/work/povray-3.6.1/libraries'
make[1]: *** [all-recursive] Fehler 1
make[1]: Leaving directory `/var/tmp/portage/povray-3.6.1-r1/work/povray-3.6.1'
make: *** [all] Fehler 2
!!! ERROR: media-gfx/povray-3.6.1-r1 failed.
Call stack:
ebuild.sh, line 1546: Called dyn_compile
ebuild.sh, line 937: Called src_compile
povray-3.6.1-r1.ebuild, line 51: Called die
!!! build failed
!!! If you need support, post the topmost build error, and the call stack if relevant.
|
Can somebody help me?
Thanks! _________________ ""Sir! We are surrounded!" - "Excellent! We can attack in any direction!"" |
|
Back to top |
|
|
dleverton Guru
Joined: 28 Aug 2006 Posts: 517
|
Posted: Fri Dec 15, 2006 10:27 pm Post subject: |
|
|
See this post. |
|
Back to top |
|
|
humanthing Tux's lil' helper
Joined: 29 Nov 2006 Posts: 141
|
Posted: Fri Dec 15, 2006 10:40 pm Post subject: |
|
|
oh sorry I forgot to search the forum... shall i delete this thread?? _________________ ""Sir! We are surrounded!" - "Excellent! We can attack in any direction!"" |
|
Back to top |
|
|
dleverton Guru
Joined: 28 Aug 2006 Posts: 517
|
Posted: Fri Dec 15, 2006 11:00 pm Post subject: |
|
|
humanthing wrote: | oh sorry I forgot to search the forum... |
No problem, it happens sometimes.
Quote: | shall i delete this thread?? |
You can ask a mod to move it to the Duplicate Threads forum. |
|
Back to top |
|
|
nixnut Bodhisattva
Joined: 09 Apr 2004 Posts: 10974 Location: the dutch mountains
|
Posted: Sat Dec 16, 2006 11:14 am Post subject: |
|
|
Moved at the request of the OP _________________ Please add [solved] to the initial post's subject line if you feel your problem is resolved. Help answer the unanswered
talk is cheap. supply exceeds demand |
|
Back to top |
|
|
|