Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
kernel module rtl8139 (netzwerkkarte)
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
razorbuzz
Tux's lil' helper
Tux's lil' helper


Joined: 05 Jul 2002
Posts: 88
Location: Bielefeld

PostPosted: Sat Jul 06, 2002 9:31 pm    Post subject: kernel module rtl8139 (netzwerkkarte) Reply with quote

hallo,
nachdem ich jetzt erfolgreich gentoo bis stage 3 installliert habe, und meine netzwerkarte erst als modul rtl 8139 eingebunden habe, => kein connect mit adsl-start

dann fest eincompiliert habe => kein connect.

fehlermeldungen:
faild to load modul rtl8139 ( bei modul konfig )

kernel habe ich mit emerge sys-kernel/vanilla-sources ( müsste 2.4.18 sein)

hat jemand eine idee wie ich die netzwerkkarte sicher einbinde, damit ich endlich mit adsl-setup online gehen kann ? ( ach ja, die beiden paket rpppoe und ppp?? die immer in den posts genannt werden habe ich correct installiert und funktionieren ja auch wenn ich die chroot umgebung unter suse starte.


ich will weg von suse...
Back to top
View user's profile Send private message
Scandium
Retired Dev
Retired Dev


Joined: 22 Apr 2002
Posts: 340
Location: Germany

PostPosted: Sat Jul 06, 2002 10:35 pm    Post subject: Reply with quote

hi, der fehler liegt vielleicht daran dass rtl8139 das alte modul ist und in 2.4 kernels 8139too für die Realtek 8139 Karten benutzt wird
Back to top
View user's profile Send private message
razorbuzz
Tux's lil' helper
Tux's lil' helper


Joined: 05 Jul 2002
Posts: 88
Location: Bielefeld

PostPosted: Sun Jul 07, 2002 8:40 am    Post subject: ok netzwerk geht , aber adsl nicht Reply with quote

was muss ich genau bei /etc/conf.d/net eintragen wenn ich 2 netzwerkkarten habe und dsl benutze ?

eth0
eth1
Back to top
View user's profile Send private message
Scandium
Retired Dev
Retired Dev


Joined: 22 Apr 2002
Posts: 340
Location: Germany

PostPosted: Sun Jul 07, 2002 10:47 am    Post subject: Reply with quote

k.a. bin hinter nem router wo ich keinen root zugriff habe deswegen hab ich DSL noch nie eingerichtet ... sorry
Back to top
View user's profile Send private message
Gominik
n00b
n00b


Joined: 23 Jun 2002
Posts: 39
Location: Germany

PostPosted: Sun Jul 07, 2002 1:44 pm    Post subject: Reply with quote

Du musst wissen welche Netzwerkkarte für DSL und welche fürs Netzwerk.

Angenommen eth0 ist die Karte fürs Netzwerk, dann richtest du die Netzwerkkarte genauso wie in der Anleitung beschrieben ein. eth1 (für DSL) lässt du unkonfiguriert, also auskommentiert. Dann musst du einrichten, dass die Karte fürs Netzwerk bei jedem Booten gestartet wird, das geht mit "rc-update add eth0 add", steht aber auch gut in der Anleitung beschrieben. eth1 kannst du dann per adsl-setup für DSL einrichten.

Achtung: bei mir waren eth0 und eth1 nach der Installation im Vergleich zu während der Installation vertauscht.

Tschö
Gom
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum