| View previous topic :: View next topic |
| Author |
Message |
eXess
Apprentice
Joined: 17 Aug 2003
Posts: 243
Location: Belgium
|
 Posted: Mon Sep 18, 2006 12:51 pm Post subject: Problem with MGE UPS Ellipse 300 USB |
 |
|
Hi all,
I followed the how-to in https://forums.gentoo.org/viewtopic-t-372153-highlight-ellipse+300+ups.html (I used NUT version that was in portage, as it was a higher version that the one stated in the text). I followed exactly the steps in the howto, but couldn't start the driver (and so I stopped there) :
| Code: | # /etc/init.d/upsdrv start
* Caching service dependencies ... [ ok ]
* Starting UPS drivers ...
Network UPS Tools - UPS driver controller 2.0.3
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
No matching USB/HID UPS found
Driver failed to start (exit status=1)
* Failed to start UPS drivers! [ !! ] |
I already checked kernel config and module loading, it should be all right I guess. UPS is turned on and connceted allright. I am not very good at configuring UDEV, so I can only guess that config is ok...
| Code: | # mkdir test
# mount --bind / test
# ls -al test/dev/con* test/dev/nul*
crw------- 1 root tty 5, 1 Feb 14 2006 test/dev/console
crw-rw-rw- 1 root root 1, 3 Feb 14 2006 test/dev/null |
So, here I am.
Can someone help with that ?
Thaaaaaaaaaaaaaaaaaaaaanks in advance (I really need to get this to work before friday!) 
_________________
. . . . . . . .
eXess |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Documentation, Tips & Tricks
