i810: libGL warning: 3D driver claims to not support visual

Message

MACHINE · Post by **MACHINE** » Sun Jun 04, 2006 1:26 am

I915G Chipset

nwang@travelmate ~ $ glxgears
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x25
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x29
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2d
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x31

I got this error after I update Xorg 7.0 to 7.1.....

and glxgears performance decreases from 1060fps to 886fps

any help?

thewhale · Post by **thewhale** » Sun Jun 04, 2006 10:54 am

Something very similar just happened to me: i915GM chipset, updated from X.org 7.0 to 7.1 and got the following messages upon starting glxgears:

Code: Select all

libGL warning: 3D driver returned no fbconfigs.
libGL error: InitDriver failed
libGL error: reverting to (slow) indirect rendering

glxgears performance suffers accordingly, i. e. framerate drops to about 1/3.

/var/log/Xorg.0.log, however, reports

Code: Select all

(II) I810(0): direct rendering: Enabled

I'm at a loss...

Update:
After rebooting, glxgears performance is back to normal, but now the

Code: Select all

libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x25
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x29
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2d
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x31

warnings appear, too.

h17z · Post by **h17z** » Sun Jun 04, 2006 11:50 am

I too had this problem, but I think it isn't important. I'm using ~x86, and my solution was update the system "emerge -uD world"

hoschi · Post by **hoschi** » Wed Jun 07, 2006 12:10 pm

h17z wrote:I too had this problem, but I think it isn't important. I'm using ~x86, and my solution was update the system "emerge -uD world"

"This is not a solution"
Your just lucky

I am figured out that visual/openg-7.0 is not installed on my system, but I don't unterstand why.

punter · Post by **punter** » Wed Jun 07, 2006 12:20 pm

thewhale wrote: glxgears performance suffers accordingly, i. e. framerate drops to about 1/3.

/var/log/Xorg.0.log, however, reports
Code: Select all
(II) I810(0): direct rendering: Enabled
I'm at a loss...

Update:
After rebooting, glxgears performance is back to normal, but now the
Code: Select all
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x25
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x29
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2d
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x31
warnings appear, too.

i have the same chipset as yours (intel 915gm), and get the same warnings.
but my glxgears performance is still at 1/2 it's normal rate !

could you possibly post your xorg file please.
thanks,
shane

chetan13 · Post by **chetan13** » Thu Jun 08, 2006 5:34 am

i also get the warnings on my i915 chipset. don't know how criticial they are. btw, i have one question.. why were so few packages updated for xorg 7.0 -> 7.1 upgrade? i remember having to unmask a lot of packages to get modular X to install.

nabla² · Post by **nabla²** » Thu Jun 08, 2006 10:22 am

Same problem here. There is a bug on freedesktop. My external monitor does not work as good as before (when activating laptop and monitor, the monitor picture shows not everything; fine when only external monitor is activated). I probably downgrade...

hoschi · Post by **hoschi** » Sat Jun 10, 2006 8:22 pm

libgl.so.1 seems also not to be prelinkable

trumee · Post by **trumee** » Thu Jun 15, 2006 12:36 am

bumping this!

I also get the same messages on i915. Google earth is horribly slow because of this:

gamma ~ $ googleearth
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x25
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x29
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2d
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x31
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
Try running with LIBGL_THROTTLE_REFRESH and LIBL_SYNC_REFRESH unset.

trumee · Post by **trumee** » Thu Jun 15, 2006 12:40 am

Google earth becomes much more usable if i do this:
export LIBGL_ALWAYS_INDIRECT=true

dmartinsca · Post by **dmartinsca** » Thu Jun 15, 2006 2:24 am

trumee, thanks, this speeds up google earth considerably

Zarhan · Post by **Zarhan** » Thu Jun 15, 2006 9:43 am

Of course it speeds it up, it's using indirect (=software) rendering and not (buggy) DRI

arping · Post by **arping** » Mon Jun 19, 2006 5:20 am

seems like some bugs in mesa 6.5
https://bugs.freedesktop.org/show_bug.cgi?id=7208
https://bugs.freedesktop.org/show_bug.cgi?id=6624
but fixed in CVS now
let's wait for the new release:)

HTS · Post by **HTS** » Sat Jun 24, 2006 4:56 pm

Same Bug here... I may try the CVS of mesa
EDIT: trying the CVS

Still no chance with the CVS, the bug is still here, maybe I did something wrong...

roderick · Post by **roderick** » Sat Jun 24, 2006 6:23 pm

HTS wrote:Same Bug here... I may try the CVS of mesa
EDIT: trying the CVS

I tried the CVS of Mesa. NeverWinter Knights segfaults after I upgrade Mesa from CVS.

Any Ideas what might need to be rebuilt against new Mesa? NWN uses OpenGL and SDL library.

HTS · Post by **HTS** » Sun Jun 25, 2006 12:41 am

I hadn't removed the previous mesa properly. Now with the CVS the errors are gone.
NB: if you plan to install the CVS please edit the configs file before making to avoid installing dri drivers for all the cards

I haven't tested on games yet but google earth is running fine.

EDIT: *bump* The new CVS crashed on Warcraft3...

Rolled Back to portage version.

roderick · Post by **roderick** » Sun Jun 25, 2006 5:17 am

HTS wrote:I hadn't removed the previous mesa properly. Now with the CVS the errors are gone.
NB: if you plan to install the CVS please edit the configs file before making to avoid installing dri drivers for all the cards

I haven't tested on games yet but google earth is running fine.

EDIT: *bump* The new CVS crashed on Warcraft3... Rolled Back to portage version.

Something weird with prebuilt games requiring SDL/OpenGL and DRI probably... wish I could figure it out.

trumee · Post by **trumee** » Sun Jun 25, 2006 9:39 am

Is there an ebuild to grab mesa cvs?

HTS · Post by **HTS** » Sun Jun 25, 2006 3:52 pm

Well if it's CVS there is no ebuild

Do an

Code: Select all

emerge cvs

Then go to your home folder or anywhere you want and you can grab the CVS using:

Code: Select all

cvs -d:pserver:anonymous@anoncvs.freedesktop.org:/cvs/mesa co Mesa

The CVS is about 30MB if I remember so be patient.
Before you make, you can edit the Mesa/configs/linux-dri file to choose only the driver for your card (saves loads of compilation time).

BRPXQZME · Post by **BRPXQZME** » Sun Jun 25, 2006 5:01 pm

trumee wrote:Is there an ebuild to grab mesa cvs?

The XGL overlay has ebuilds for mesa CVS at certain dates.

HTS · Post by **HTS** » Sun Jun 25, 2006 5:15 pm

Well, the method I mentionned above grabs the latest CVS from the official website, if you're going for CVS, do it the right way... or am I wrong?

BRPXQZME · Post by **BRPXQZME** » Sun Jun 25, 2006 5:29 pm

If you're using Gentoo, do it the Right Way and use an ebuild. It makes it a lot easier to slip different versions in and out, plus it tracks stuff. Also makes it easier to choose a verified working date for CVS; sometimes you can catch it at the wrong time.

Besides, the ebuild is easier to modify and other people are using it so you aren't alone if it isn't working; you don't really need to manually check the CVS out unless you intend to fish out a problem yourself (fun!)

HTS · Post by **HTS** » Sun Jun 25, 2006 5:55 pm

Well, if you don't want to run into problems just stick to the stable ebuilds and don't try the CVS.
CVS is Not the Gentoo Way indeed. CVS is aimed at developpers and kernel hackers and allow checking and testing the latest developments. Well at least that's how I use them.
IMHO if you are affraid to break your system, just don't use CVS at all.

punter · Post by **punter** » Tue Jun 27, 2006 12:26 am

I personally use Gentoo to have the latest (or as others like to call it "bleeding-edge") linux supported system (drivers/software/etc).
I think gentoo does a good job with regards to CVS packages..... E17 is one example with many users...
I think it'd be nice if mesa-cvs ebuild makes it into the official portage.

incidentally, if you guys feel gentoo's not the right distro for cvs packages... then what/which distro is? (i might switch over !)

BRPXQZME · Post by **BRPXQZME** » Tue Jun 27, 2006 12:38 am

Slackware or Linux from Scratch fits the bill, but why would you do that to yourself?

(Well, I would understand if you need to make a 4MB server-in-a-thimble or something, or if you were one of them FreeBSD people, but for almost every purpose, there is a correct distro to use)

ebuilds are the way to go if you only intend on being a user and not tweaking the sources yourself; I don't mean to knock on anyone who actually needs to use Mesa CVS manually, because of course they help make 3D acceleration work on my computer

i810: libGL warning: 3D driver claims to not support visual

i810: libGL warning: 3D driver claims to not support visual

libGL warning: 3D driver returned no fbconfigs

Re: libGL warning: 3D driver returned no fbconfigs