| View previous topic :: View next topic |
| Author |
Message |
__g_blade
Tux's lil' helper
Joined: 13 Jan 2006
Posts: 101
Location: paderborn, germany
|
 Posted: Tue May 16, 2006 7:11 am Post subject: |
 |
|
| Code: |
omerta ~ # startx
xauth: creating new authority file /root/.serverauth.6670
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation CVS repository.
See http://wiki.x.org/wiki/CvsPage for CVS access instructions.
X Window System Version 7.0.99.903 (7.1.0 RC 3)
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.0.99.903
Build Operating System: Linux 2.6.17-rc2 i686
Current Operating System: Linux omerta 2.6.17-rc3-no2 #1 SMP PREEMPT Sun May 14 14:11:50 CEST 2006 i686
Build Date: 15 May 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 16 09:06:42 2006
(==) Using config file: "/etc/X11/xorg.conf"
(EE) module ABI major version (0) doesn't match the server's version (1)
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
|
| Code: |
cat /var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation CVS repository.
See http://wiki.x.org/wiki/CvsPage for CVS access instructions.
X Window System Version 7.0.99.903 (7.1.0 RC 3)
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.0.99.903
Build Operating System: Linux 2.6.17-rc2 i686
Current Operating System: Linux omerta 2.6.17-rc3-no2 #1 SMP PREEMPT Sun May 14 14:11:50 CEST 2006 i686
Build Date: 15 May 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 16 09:06:42 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig Screen 0" (0)
(**) | |-->Monitor "aticonfig Monitor 0"
(**) | |-->Device "ATI Graphics Adapter 0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/TTF").
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1849,3189 rev 80 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:10:0: chip 1106,3038 card 1849,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1849,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1849,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1849,3104 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1849,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1849,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1849,9761 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1849,3065 rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5960 card 196d,1052 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5940 card 196d,1053 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xbfd00000 - 0xdfcfffff (0x20000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200 PRO] rev 1, Mem @ 0xd0000000/27, 0xdfef0000/16, I/O @ 0xc800/8, BIOS @ 0xdfec0000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) rev 1, Mem @ 0xc8000000/27, 0xdfee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdffffe00 - 0xdffffeff (0x100) MX[B]
[1] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[4] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[5] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[7] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[8] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[12] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdffffe00 - 0xdffffeff (0x100) MX[B]
[1] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[4] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[5] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[6] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[7] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[8] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[12] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdffffe00 - 0xdffffeff (0x100) MX[B]
[5] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
[8] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
[9] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[10] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[11] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[15] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[17] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[18] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[19] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[20] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.99.903, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.24.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(EE) module ABI major version (0) doesn't match the server's version (1)
(II) UnloadModule: "fglrx"
(II) Unloading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.99.903, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(EE) No drivers available.
Fatal server error:
no screens found
|
| Code: |
cat /etc/X11/xorg.conf
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig Screen 0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# Load "speedo"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
Load "dri"
Load "glx"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option "XkbRules" "xorg"
Option "XkbModel" "logicdp"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 31.5 - 64.3
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig Monitor 0"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# unsupported card
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "My Video Card"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "My Video Card"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
_________________
--eof-- |
|
| Back to top |
|
 |
Consul
n00b
Joined: 03 May 2003
Posts: 31
Location: Port Huron, Michigan, USA
|
| Posted: Tue May 16, 2006 2:32 pm Post subject: |
|
|
Please disregard my last message. I think I may have figured it out. Thanks anyway, though.
_________________
Mother, please, is it just a disease that has them breaking all of my laws?
Check if you can disconnect the effect, and I'll go after the cause.
-- Moribund the Burgermeister |
|
| Back to top |
|
|
__g_blade
Tux's lil' helper
Joined: 13 Jan 2006
Posts: 101
Location: paderborn, germany
|
| Posted: Thu May 18, 2006 8:12 am Post subject: |
|
|
can somebody tell me what to do please
already posted startx output and log files
here emerge info
| Code: | Portage 2.1_rc1-r2 (default-linux/x86/2006.0, gcc-4.1.1-pre20060513, glibc-2.4.90.20060511-r0, 2.6.17-rc2 i686)
=================================================================
System uname: 2.6.17-rc2 i686 AMD Sempron(tm) 2200+
Gentoo Base System version 1.12.0_pre19
dev-lang/python: 2.4.3-r1
dev-python/pycrypto: 2.0.1-r5
dev-util/ccache: [Not Present]
dev-util/confcache: [Not Present]
sys-apps/sandbox: 1.2.17
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2
sys-devel/binutils: 2.16.92
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.16
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=athlon-xp -fomit-frame-pointer -pipe -ftracer -fweb -frename-registers"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/kde/3/share/config /usr/share/X11/xkb /usr/share/config /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/eselect/compiler /etc/gconf /etc/revdep-rebuild /etc/splash /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -march=athlon-xp -fomit-frame-pointer -pipe -ftracer -fweb -frename-registers -fvisibility-inlines-hidden"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LDFLAGS="-Wl,-O1 -Wl,--sort-common"
LINGUAS="en fr de es it tr"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 3dnow 3dnowext X aim alsa apache2 apic apm arts avi berkdb bidi bitmap-fonts cli cmov crypt cups cx8 de dri eds emboss
encode esd foomaticdb fortran fpu fxsr gdbm gif glibc-omitfp gnome gpm gstreamer gtk gtk2 icq imlib ipv6 irc isdnlog jabber javascript jpeg kde libg++ libwww lj mad mca mce mikmod mmx mmxext motif mp mp3 mpeg msn msr mtrr ncurses nls nptl nptlonly ogg opengl pae pam pat pcre pdflib perl pge png pppd pse pse36 python qt quicktime readline reflection rss sdl sep session spell spl sse ssl syscall tcpd truetype truetype-fonts ts tsc type1-fonts udev up vme vorbis xml xmms xorg xv yahoo zlib elibc_glibc kernel_linux linguas_en linguas_fr linguas_de linguas_es linguas_it linguas_tr userland_GNU"
Unset: ASFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, MAKEOPTS, PORTAGE_RSYNC_EXTRA_OPTS
|
| Code: |
Conrad-LiveCD fonts # eix xorg-server
* x11-base/xorg-server
Available versions: 1.0.2-r4 1.0.99.903
Installed: 1.0.99.903
Homepage: http://xorg.freedesktop.org/
Description: X.Org X servers
Found 1 matches
Conrad-LiveCD fonts # eix input-mouse
* x11-drivers/xf86-input-mouse
Available versions: 1.0.4 1.1.0
Installed: 1.1.0
Homepage: http://xorg.freedesktop.org/
Description: X.Org driver for mouse input devices
Found 1 matches
Conrad-LiveCD fonts # eix input-keyboard
* x11-drivers/xf86-input-keyboard
Available versions: 1.0.1.3 1.1.0
Installed: 1.1.0
Homepage: http://xorg.freedesktop.org/
Description: X.Org driver for keyboard input devices
Found 1 matches
Conrad-LiveCD fonts # eix xorg-x11
* x11-base/xorg-x11
Available versions: 6.8.2-r7 [M]6.9.0-r1 7.0-r1 7.1_rc2
Installed: 7.1_rc2
Homepage: http://xorg.freedesktop.org
Description: An X11 implementation maintained by the X.Org Foundation (meta package)
Found 1 matches
|
downgrading didn't work, but i will try again
_________________
--eof-- |
|
| Back to top |
|
|
shrndegruv
l33t
Joined: 18 Sep 2005
Posts: 658
|
| Posted: Thu May 18, 2006 6:21 pm Post subject: |
|
|
| so will downgrading xorg-server to 1.0.23 fix it? |
|
| Back to top |
|
|
zeppelin
n00b
Joined: 09 Apr 2005
Posts: 12
|
| Posted: Mon May 22, 2006 2:04 pm Post subject: |
|
|
After installing Modular Xorg following the Wiki and Handbook rules, I had the same error:
| Code: | (II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.24.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(EE) module ABI major version (0) doesn't match the server's version (1)
(II) UnloadModule: "fglrx"
(II) Unloading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(EE) Failed to load module "fglrx" (module requirement mismatch, 0) |
I read about starting X with -ignoreABI option, so I modified /usr/kde/3.5/share/config/kdm/kdmrc, putting the line: | Code: | | ServerArgsLocal=-nolisten tcp -ignoreABI |
Now, the problem is similar, but different (on the fglrx module setup):
| Code: | (II) Loading extension GLX
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.24.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(WW) module ABI major version (0) doesn't match the server's version (1)
[R200Setup] X version mismatch - detected X.org 7.1.-1.903, required X.org 7.0.-1.8
(II) UnloadModule: "fglrx"
(II) Unloading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)
|
Has anybody solved it? You can take a look to this topic too: https://forums.gentoo.org/viewtopic-p-3332337.html#3332337
[R200Setup] X version mismatch - detected X.org 7.1.-1.903, required X.org 7.0.-1.8 |
|
| Back to top |
|
|
__g_blade
Tux's lil' helper
Joined: 13 Jan 2006
Posts: 101
Location: paderborn, germany
|
| Posted: Mon May 22, 2006 2:18 pm Post subject: |
|
|
downgraded to
| Code: |
omerta ~ # eix xorg
* app-doc/xorg-docs
Available versions: 1.1-r1
Installed: 1.1
Homepage: http://xorg.freedesktop.org/
Description: X.Org docs
* app-doc/xorg-sgml-doctools
Available versions: 1.0.1
Installed: none
Homepage: http://xorg.freedesktop.org/
Description: X.Org sgml doctools
* x11-base/xorg-server
Available versions: 1.0.2-r4 [M]1.0.99.903
Installed: 1.0.2-r4
Homepage: http://xorg.freedesktop.org/
Description: X.Org X servers
* x11-base/xorg-x11
Available versions: 6.8.2-r7 [M]6.9.0-r1 7.0-r1 [M]7.1_rc2
Installed: 7.0-r1
Homepage: http://xorg.freedesktop.org
Description: An X11 implementation maintained by the X.Org Foundation (meta package)
* x11-misc/Xorgautoconfig
Available versions: !0.2.3 !0.2.4
Installed: none
Homepage: http://dev.gentoo.org/~josejx/Xorgautoconfig.html
Description: Xorgautconfig generates xorg.conf files for PPC based computers.
* x11-misc/xorg-cf-files
Available versions: 1.0.2
Installed: 1.0.1-r3
Homepage: http://xorg.freedesktop.org/
Description: Old Imake-related build files
Found 6 matches
|
now it works
thx
_________________
--eof-- |
|
| Back to top |
|
|
shrndegruv
l33t
Joined: 18 Sep 2005
Posts: 658
|
| Posted: Mon May 22, 2006 2:29 pm Post subject: |
|
|
| i tried downgrading to xorg-server 1.0.2-r4 and I get kernel panic when I try to boot X, but I dont know what version of xorg-x11 I have. Ill try the one you have when I get home. |
|
| Back to top |
|
|
sternklang
Veteran
Joined: 10 Sep 2005
Posts: 1641
Location: Somewhere in time and space
|
| Posted: Mon May 22, 2006 6:17 pm Post subject: |
|
|
NVidia just released their 8762 drivers. They do not support the xorg-x11 7.1 ABI.
According to NVidia reps on the nvnews forums, this support won't be there until the 9xxx series of drivers -- see this thread for details. |
|
| Back to top |
|
|
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
| Posted: Mon May 22, 2006 8:16 pm Post subject: |
|
|
I run 903 now, and the nvidia drivers (not newest), but I think they work...?
I haven't tested it, because I'm not at my computer, but I've started kdm via ssh and my xorg.0.log seems ok?
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
| Back to top |
|
|
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
| Posted: Mon May 22, 2006 8:27 pm Post subject: |
|
|
Here is my xorg.conf with newest xorg and nvidia! seems to work?
http://generation.no/~wakko/Xorg.0.log
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
| Back to top |
|
|
3pm
n00b
Joined: 03 Nov 2004
Posts: 64
|
| Posted: Tue May 23, 2006 9:40 am Post subject: |
|
|
I am trying to set up xgl with nvidia card. I faced the same problems e.i. font disapearance. Downgraded xorg-server and xf86-input-mouse and keyboard- that fixed font problem.
Does It mean that my xgl efforts are useless till nvidia new xorg 7 compatible driver release? |
|
| Back to top |
|
|
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
| Posted: Tue May 23, 2006 12:21 pm Post subject: |
|
|
Is the problem that fonts disappear and stuff?
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
| Back to top |
|
|
sternklang
Veteran
Joined: 10 Sep 2005
Posts: 1641
Location: Somewhere in time and space
|
| Posted: Tue May 23, 2006 1:09 pm Post subject: |
|
|
| 3pm wrote: | I am trying to set up xgl with nvidia card. I faced the same problems e.i. font disapearance. Downgraded xorg-server and xf86-input-mouse and keyboard- that fixed font problem.
Does It mean that my xgl efforts are useless till nvidia new xorg 7 compatible driver release? |
Xgl works fine with the older xorg-server so if you are still having problems they are not related to the server version. |
|
| Back to top |
|
|
sternklang
Veteran
Joined: 10 Sep 2005
Posts: 1641
Location: Somewhere in time and space
|
| Posted: Tue May 23, 2006 1:12 pm Post subject: |
|
|
| bushwakko wrote: | | Is the problem that fonts disappear and stuff? |
For some people the drivers load but don't work properly (font problems and the like). For many others (including me) the server crashes on startup. I would be interested to find out why some people like you (and Lokheed, see earlier in this thread) are able to run at all given the incompatibility between the server and the drivers. |
|
| Back to top |
|
|
Headrush
Watchman
Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World
|
| Posted: Tue May 23, 2006 1:17 pm Post subject: |
|
|
What xorg-server are you using? | Code: | | emerge xorg-server -pv |
|
|
| Back to top |
|
|
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
| Posted: Tue May 23, 2006 1:51 pm Post subject: |
|
|
right about now I'm using the newest one 1.1.0, but I've just found out that the problem doesn't manifest itself in the same way as ati (whinging about wrong ABI version), but it shows in renderaccel being broken. KDE font's being rendered improperly.
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
| Back to top |
|
|
radfoj
Guru
Joined: 31 Dec 2004
Posts: 490
Location: Tísek, Czech Republic
|
|
| Back to top |
|
|
radfoj
Guru
Joined: 31 Dec 2004
Posts: 490
Location: Tísek, Czech Republic
|
| Posted: Tue May 23, 2006 8:12 pm Post subject: |
|
|
Ok here we go. First of all I upgraded to latest nvidia and followed with upgrade to XOrg-7.1:
| Code: | media-video/nvidia-kernel-1.0.8762
media-video/nvidia-glx-1.0.8762
media-libs/mesa-6.5-r3
x11-base/xorg-server-1.1.0
x11-drivers/xf86-input-mouse-1.1.0-r1
x11-drivers/xf86-input-keyboard-1.1.0
x11-apps/mesa-progs-6.5 |
Then I added | Code: | | Option "RenderAccel" "false" |
XOrg-7.1 booted without a problem and I didnt realized nothing strange. Only redrawing of windows in KDE seems to be slower, but its due disabling RenderAccel. After I enabled RenderAccel, restarting xserver and fonts were gone. Nothing in Kmenu, only icons .... I wasnt able to open xorg.conf and disable that nonworking option with Krusader, becouse of missing fonts EVERYWHERE. OK, what in xorg.log? In both cases, they are same, only if enabling renderaccel, at the bottom there is:
| Code: | (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Setting mode "800x600"
(II) Mouse0: ps2EnableDataReporting: succeeded
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Setting mode "800x600"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) RandR enabled
(II) Initializing extension GLX
xkb_keycodes { include "xfree86+aliases(qwertz)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc/pc(pc105)+pc/cz" };
xkb_geometry { include "pc(pc105)" }; |
And what if I grep xorg.log for EE?
| Code: | (II) Loading extension MIT-SCREEN-SAVER
(EE) ============= WARNING WARNING WARNING WARNING =============
(EE) This server has a video driver ABI version of 1.0 but this
(EE) driver is designed to work with versions before 1.0. The
(EE) driver will continue to load, but may behave strangely.
(EE) Please check http://www.nvidia.com/ for driver updates or
(EE) downgrade to an X server with a supported driver ABI.
(EE) ===========================================================
(EE) Error loading keymap /usr/share/X11/xkb/compiled/server-0.xkm |
And the resolution for me? Although after few minutes with version 7.1, I didnt noticed any problem, I am going back to 7.0, becouse redrawing of windows is sensible slower (becouse of necessery RenderAccel=false).
EDITED: I am missing fonts in CODE/QUOTE with Konqueror. Also running wincfg - no fonts, |
|
| Back to top |
|
|
BlackBelt
Guru
Joined: 27 Nov 2004
Posts: 369
Location: Messina/Pisa
|
| Posted: Wed May 24, 2006 2:11 pm Post subject: |
|
|
Hi guys??
xorg-server-1.1.0 was released. In your opion is it work with nvidia-kernel 8762 or is better don't upgrade the packet?
thanks
_________________
"Sulla strada per l'inferno c'e' sempre un sacco di gente,
ma è comunque una via che si percorre in solitudine."
Charles Bukowski |
|
| Back to top |
|
|
VoVaN
l33t
Joined: 02 Jul 2003
Posts: 688
Location: The Netherlands
|
| Posted: Thu May 25, 2006 7:17 am Post subject: |
|
|
| BlackBelt wrote: | Hi guys??
xorg-server-1.1.0 was released. In your opion is it work with nvidia-kernel 8762 or is better don't upgrade the packet?
thanks |
I've tried the latest nvidia drivers & xorg-server-1.1.0. unfortunately... the same issue ;( |
|
| Back to top |
|
|
Cryssli
Apprentice
Joined: 16 Sep 2003
Posts: 213
Location: Regensburg - Germany
|
| Posted: Thu May 25, 2006 1:28 pm Post subject: |
|
|
I've got the same error as mentioned in the first post with the newest ATI-Drivers 8.25.8. Take a look here: https://forums.gentoo.org/viewtopic-t-465298.html
Xorg.0.log
| Code: |
...
Backtrace:
0: X(xf86SigHandler+0x94) [0x4789b4]
1: /lib/libc.so.6 [0x2ba6f6c43840]
2: /lib/libc.so.6(strlen+0x55) [0x2ba6f6c844d5]
3: X(xf86XVScreenInit+0x81f) [0x4892ff]
4: /usr/lib64/xorg/modules/drivers/fglrx_drv.so(KaleidoscopeInitVideo+0x8a) [0x2ba6f7c7a3ca]
5: /usr/lib64/xorg/modules/drivers/fglrx_drv.so(R200ScreenInit+0xc51) [0x2ba6f7c4dec1]
6: X(AddScreen+0x1fe) [0x432f4e]
7: X(InitOutput+0x218) [0x4619d8]
8: X(main+0x293) [0x432893]
9: /lib/libc.so.6(__libc_start_main+0xf6) [0x2ba6f6c31136]
10: X(FontFileCompleteXLFD+0xa1) [0x432059]
|
_________________
----------------------------------------------------------
JabberID: Jabberwocky AT amessage.de
GPG-Key: http://www.cryss.net/pubkey.gpg.asc
---------------------------------------------------------- |
|
| Back to top |
|
|
sternklang
Veteran
Joined: 10 Sep 2005
Posts: 1641
Location: Somewhere in time and space
|
| Posted: Thu May 25, 2006 2:51 pm Post subject: |
|
|
| I think it's safe to say that almost nobody running binary nvidia or ati drivers is going to have a happy experience with the new xorg-server. So short of politely emailing nvidia or ati to encourage them to a. release compatible drivers soon and b. open-source the damn things so the community can improve the drivers more quickly than their no-doubt-talented developers can all by themselves, all we can do is wait. |
|
| Back to top |
|
|
przemos
Guru
Joined: 30 May 2005
Posts: 433
Location: HWDP
|
| Posted: Thu May 25, 2006 5:16 pm Post subject: |
|
|
I heard about this note somewhere but today I made an update emerge -uD world and now I got:
| Code: |
* x11-base/xorg-server
Installed: 1.1.0
* x11-base/xorg-x11
Installed: 7.1_rc2
* media-video/nvidia-glx
Installed: 1.0.8762
|
xorg.conf:
Then I run some 3D game i.e. quake3 and everything seems going fine, so I don't get it what's wrong? |
|
| Back to top |
|
|
nesl247
Veteran
Joined: 15 Jun 2004
Posts: 1614
Location: Florida
|
| Posted: Thu May 25, 2006 6:50 pm Post subject: |
|
|
| I've run the latest xorg-server (1.1 and even before that the 7.1 cvs) and nvidia binary with NO problems. I don't do anything special.. I do use xgl instead of Xorg (though xgl starts xorg in the background anyways). I do remember that fonts were all screwed up using Xorg-server 1.1 (and cvs) though. |
|
| Back to top |
|
|
blazeu
Apprentice
Joined: 02 Feb 2005
Posts: 159
Location: Cracow, Poland
|
| Posted: Sat May 27, 2006 8:31 am Post subject: |
|
|
I've read on the nvidia forum that only nvidia >=90xx drivers will work with new xorg's... So we have to wait some time :/ But I've also read that new drivers for windows are about to be released so there is some hope 
_________________
Przeczytanie manuala: 5-10minut
Zadanie kolejnego bzdurnego pytania na forum: 0.5 minuty
Status idioty wsrod forumowiczow: bezcenny
Tako rzecze ja: kapral rezerwy |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
