Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
RAID autodetect problem
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
squarebug
n00b
n00b


Joined: 21 Feb 2004
Posts: 26

PostPosted: Sun Sep 11, 2005 3:57 am    Post subject: RAID autodetect problem Reply with quote

This is my first attempt to set up a RAID 1 system on a PPC. I have set up RAID systems many times on x86 machines, however I seem to fail miserably on the PPC platform. My main problem is that there doesn't seem to be a RAID autodetect (type fd on the x86 platform), and as a result the RAID 1 set I'm trying to set up is not recognized upon boot. Btw, the goal is to have a RAID1 root partition. I'm just learning mac-fdisk and I successfully used it to create a RAID set (and subsequently installed the system on it), but upon reboot the RAID set is not recognized. When I use parted to configure the partitions, the raid flag is not available.

Any idea on how to get a RAID1 root working is greatly appreciated.
Back to top
View user's profile Send private message
Sejam
Tux's lil' helper
Tux's lil' helper


Joined: 25 Oct 2004
Posts: 80

PostPosted: Thu May 04, 2006 5:58 pm    Post subject: Reply with quote

Did you ever figure this out? I have the same questions about using mac-fdisk and not having partition type fd.
Back to top
View user's profile Send private message
Siftah
n00b
n00b


Joined: 16 Jun 2003
Posts: 39
Location: Manchester, UK

PostPosted: Fri May 05, 2006 5:10 am    Post subject: Re: RAID autodetect problem Reply with quote

squarebug wrote:
This is my first attempt to set up a RAID 1 system on a PPC. I have set up RAID systems many times on x86 machines, however I seem to fail miserably on the PPC platform. My main problem is that there doesn't seem to be a RAID autodetect (type fd on the x86 platform), and as a result the RAID 1 set I'm trying to set up is not recognized upon boot. Btw, the goal is to have a RAID1 root partition. I'm just learning mac-fdisk and I successfully used it to create a RAID set (and subsequently installed the system on it), but upon reboot the RAID set is not recognized. When I use parted to configure the partitions, the raid flag is not available.

Any idea on how to get a RAID1 root working is greatly appreciated.


https://forums.gentoo.org/viewtopic-t-416599.html
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum