View previous topic :: View next topic |
Author |
Message |
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Thu Jan 12, 2006 12:41 am Post subject: [SCRIPT] Profiles pour vos interfaces LAN et WIRELESS |
|
|
Bonsoir, j'ai décidé de faire un petit script assez simple permettant la sauvegarde de toutes les manipulations à effectuer pour vous connecter à votre réseau cablé (LAN) ou sans-fils (WLAN). J'ai avant tout pensé aux utilisateurs de portable (heu... et a moi aussi, au début ) qui doivent en avoir des fois un peu marre de configurer tout le temps leur interface réseau de manière différente, selon l'endroit ou ils se trouvent. Ce script est la pour vous simplifier la vie.
Donc, j'ai supposé que les utilisateurs de portable n'avaient que 2 interfaces (1 pour le WAN et une pour le WLAN)... Oui, encore désolé si vous avez plus que ça, mais avec un peu de rajout, il devrait pouvoir en gérer plus . Libre à vous de le modifier selon vos désirs.
Je voulais que ce script puisse me connecter en lui passant juste le nom du profile (ou le profile par défaut, si on ne spécifie pas le nom). C'est ainsi que pour chaque profile, vous devez specifier au début (variable CURRENT) de quelle interface vous parlez (vous parlez d'un réseau sans-fils (WLAN) ou d'un réseau cablé (LAN) ???).
Grace à cet variable, le script est donc capable de configurer vos options pour la carte LAN ou WLAN. Vous DEVEZ obligatoirement configurer les deux variables LAN et WLAN, qui represente le nom de vos interface (ex: LAN="eth0" et WLAN="eth1"). Sans cela, la carte ne pourra etre configurée, vu que le script ne sais pas de quelle carte on parle...
La dernière chose à configurer avant d'ajouter les profiles est la variable DEFAULT, qui représente le nom du profile utilisé par défaut. Par defaut, cette variable contient "help", ce qui aura pour effet d'afficher l'aide si vous ne l'avez pas changée (en utilisant le script sans paramètres).
La dernière chose à faire, c'est d'y ajouter tout vos profiles. Exemple et explications se trouve dans le script (en commentaire). Voici la logique à suivre:
- un profile n'est qu'une fonction contenant les commandes ifconfig et iwconfig et plein d'autre si vous en avez besoin...
- le nom de cette fonction sera alors le nom de profile
- chaque profile DOIT OBLIGATOIREMENT COMMENCER PAR CECI:
- CURRENT= pour spécifier le type de réseau (et donc, la carte à utilié )
- start appeller cette fonction (pour activer la prise en charge de l'argument 'fix' dans le profile, et aussi faire un ifconfig INT up avant la configuration.)
- après, vous pouvez soit utiliser la fonction use_dhcp, ou specifier à la main les configurations de vos interface.
- puis vous pouvez encore ajouter tout ce qu'il vous plaira de démarrer lors de la connexion avec ce profile. Ex, montage de NFS, etc...
Je tiens à préciser qu'il y a juste un petit détail à régler dans la prochaine version. C'est juste le fait que, à chaque utilisation de la fonction use_dhcp, celle ci va faire un pkill dhcpcd (qui est une bonne méthode pour tuer le dhcpcd quand il est déjà activé. Il faut le faire sinon la commande dhcpcd ne passera pas, vu qu'elle est déjà présente). Le problème, c'est que si vous utiliser le dhcpcd pour vos 2 interfaces, l'activation du deuxième profile va tuer le dhcpcd du premier profile. Il faudrait en fait, à la place de faire un pkill dhcpcd, faire un truc (que je sais pas comment faire!!!) qui tuerais le dhcpcd DE l'INTERFACE à reconfigurer, et non TOUS...
Si vous savez comment faire, dites le moi,je mettrai à jour directement
Voilà, si vous avez des problèmes ou des suggestions, faites m'en part
Note: à executer en root, faites un chmod +x fichier pour le rendre exécutable, démarrage via './net-loop' ou 'sh net-loop'
Note2: j'espère ne pas vous choquer avec mon anglais
Note3: pour l'aide, 'net-loop help', ou alors, regarder dans le script
Note4: un petit "ln -s net-loop /usr/sbin/net-loop" et vous pourez l'executer de n'importe ou
EDIT: dernière modification du script: 15 janvier, 19h
Code: |
loop-nb ~ # cat net-loop
#!/bin/bash
# By loopx (loop_x@hotmail.com)...
# If you have bug report or any suggestions, send me a mail :)
# Last modification: 01/15/2006
#####################################
###################################
################################
# Introduction:
# I have made this little script to save ALL network configuration
# of my notebook. Yes, it will not be usefull for desktop computer,
# because they have one configuration, because a tower can't move like
# a notebook.
# So, you can easily use this script to store your different configurations
# in ONE and unique file, which is a script.
#
# A notebook has generally one wired network interface, and one wireless network interface.
# So I use 2 variable: WLAN and LAN, to store the name of the interface (you can found it by this 'ifconfig -a', or 'iwconfig').
# It's very important to set WLAN and LAN. If not, the script will do nothing good :(.
# The 3rd variable are CURRENT. You MUST set it AT THE FIRST LINE OF EACH PROFILE. It would associate a type of connection (LAN, WLAN)
# to the profile. Like this, this script is able to configure your NIC correctly.
# After setting the CURRENT variable, you MUST USE the function 'start' to start initialisation and fixing old route problem if needed.
# Note, you should use (in your profile) $WLAN or $LAN
# instead of eth1 or eth0. It's a modularity question... And if you buy a new wireless card, in addition of the old, and you want to
# use it for ALL your profile, you just need to change the value of the variable WLAN (WLAN="eth3"). So, enjoy ;)
# NOTE: do not forgot to set the DEFAULT value, with the profile name of your profile than you want to set as default. For use the default
# profile, you just need to type 'net-loop' with no argument. By default, DEFAULT will show you the help...
#########################################################################################################################################
########################################################################################################################################
# Example of a very simple profile, to connect to the network 10.59.13.75/24 with 10.59.13.254 as default route (no wireless, no dhcp):
#-------
# my_profile_name() {
# CURRENT="LAN"
# start
# echo "I start my profile here"
# ifconfig $LAN 10.59.13.75 netmask 255.255.255.0 broadcast 10.59.13.255 #no need to add the 'up' argument, 'start' function will do it before
# route add default gw 10.59.13.254
# echo "#my_profile_name" > $DNS #Add a trace to the DNS configuration file, AND replace the current content of this file ('>')
# echo "domain my_domain.org" >> $DNS #Add the domain name AT THE END of the file ('>>') (if not needed, you can remove this line)
# echo "nameserver 10.59.13.75" >> $DNS #Add primary domain name, you can add more by copy/past this line just after...this line
# }
#
# Second example: here is an other profile, but using wireless AND dhcp
#---------------
# my_profile_name() {
# CURRENT="WLAN"
# start
# echo "Here is my second profile"
# iwconfig $WLAN essid "home" key open KEY rate auto AP mac_AP #YOU NEED THIS, before using DHCP with wireless !!! If not, DHCP will fail.
# use_dhcp
# }
##################################################################################################################################################
#################################################################################################################################################
############
# Configuration
#--------------
# 0. Set up the 4 variables: LAN, WLAN, DEFAULT, DNS with correct value ...
#
# 1. You MUST ADD these two command AT THE BEGINING OF EACH PROFILE!!!:
# CURRENT="X" (X= LAN or WLAN)
# start to start the initialisation of your NIC
# 2. You can add this line to use the dpcpcd command for use the DHCP:
# use_dhcp
# 3. If you won't use DHCP, you can now add your command line and argument to set up
# your interface. You can use what you want:
# iwconfig $WLAN ....
# ifconfig $LAN ....
# 4. Now it's stuff time. You can add what you need in addition of your configuration of interface.
# mount serveur:/mnt/data /mnt/server
# xmms ?
# /usr/games/bin/q3demo ...
#
#----------------------------------
# LAN = interface for wired network
# WLAN = interface for wireless network
# DEFAULT = the default profile to use when no parameter or when fixing bug
# DNS = the path to the resolv.conf configuration file (DNS=/etc/resolv.conf by default)
# CURRENT = LAN or WLAN Specifie what interface to use (for DHCP use). This variable MUST BE SET IN THE BEGINING OF YOUR PROFILE
LAN="eth0"
WLAN="eth1"
DEFAULT="home"
DNS=/etc/resolv.conf
############
############
# ALL YOUR PROFILES,
# ARE JUST A LIST OF COMMAND TO EXECUTE IN A SHELL.
# YOU CAN ADD WHAT YOU WANT HERE, LIKE NFS MOUNTING, ETC...
############
############WIRELESS##########
home() {
CURRENT="WLAN"
start
iwconfig $WLAN essid "loopx" channel 5 key open 32132132132132132132132132 rate auto mode Managed AP 00:12:17:6f:b4:29
use_dhcp
echo "domain loopx.dyndns.org" > $DNS
echo "nameserver 192.169.0.254" >> $DNS
echo
echo " >>> Mounting NFS system"
/etc/init.d/portmap start
mount 192.169.0.254:/mnt/data /mnt/serveur
}
##############WIRED###########
internat() {
CURRENT="LAN"
start
echo
echo " >>> Personal configuration for domain INTERNAT..."
ifconfig $LAN 10.59.13.75 netmask 255.255.255.0 broadcast 10.59.13.255
echo "#internat-personal" > $DNS
echo "domain internat.prov-liege.be" >> $DNS
echo "nameserver 10.59.13.254" >> $DNS
echo "nameserver 192.168.1.254" >> $DNS
echo " Adding 2 route to INPRES..."
route add -net 10.59.5.0 netmask 255.255.255.0 gw 10.59.13.254
route add -net 10.59.4.0 netmask 255.255.255.0 gw 10.59.13.254
echo " Adding host route to loopx.dyndns.org, can take a while"
route add -host loopx.dyndns.org gw 10.59.13.254
echo " >>> Starting VPN..."
/etc/init.d/openvpn start
echo " >>> Starting proxy socks... (!!! WARNING: CONSOLE IN USE !!!)"
ssh -D 9999 -g loopx@localhost
}
############################################################################################################
#####################################################################
# HERE ARE SOME BASIC FUNCTION USING TO SET YOUR NETWORK INTERFACE #
###################################################################
#################################################################
# ON/OFF wireless radio frenquency
wan_on() {
echo " >>> !!! Activating radio for WAN interface on" $WLAN "!!!"
echo 1 > /proc/driver/acerhk/wirelessled
}
wan_off() {
echo 0 > /proc/driver/acerhk/wirelessled
echo " >>> WLAN radio frenquency is now OFF !!!"
}
# to show the current configuration of your interface
# Now, you can use 'net-loop status vpn' for the status
# of your vpn connection in example
status() {
if [ -z $PARAM2 ]; then
echo ">>> Status of your network interfaces :"
echo " >>> ===LAN interface==="
ifconfig $LAN
echo " >>> ===WLAN interface==="
ifconfig $WLAN
iwconfig $WLAN
#Here is my add of vpn status check. You can remove it if
#not necessary. If you want to add another, just add the same first line (elif [ ...)
#at the end of the first added status (vpn), and BEFORE the 'else'.
elif [ $PARAM2 = "vpn" ]; then
echo ">>> Status of you VPN network :"
echo
echo " Entrez le nom ou l'ip de votre serveur: "
read SERVEUR
#the command run with ssh, show the status of my server OpenVPN
echo
echo " >>> OpenVPN status for" $SERVEUR
ssh root@$SERVEUR cat /etc/openvpn/serveur/openvpn-status.log
else
echo "!!! Error after 'status'. Nothing to do..."
fi
}
# this is used by my, for fix an ipw2200 bug (slow connection)
fix() {
#to fix the specified bug
if [ -z $PARAM2 ]; then
echo " >>> Fixing ipw2200 bug..."
rmmod ipw2200
echo " Waiting 5 seconds"
sleep 3
echo " Re-loading ipw2200 module..."
modprobe ipw2200
echo " Finished. You must now activate a profile to get connectivity!"
#to remove old route of the profile to activate
else
$PARAM2
fi
}
# check the CURRENT interface, and bring up DHCPCD to automatically set your NIC
use_dhcp() {
if [ -z $CURRENT ]; then
echo " ??? Don't know what to do [*_*]"
else
echo
echo " >>> Using DHCP for" $CURRENT
if [ $CURRENT = "LAN" ]; then
if [ -e "/var/run/dhcpcd-"$LAN".pid" ]; then
echo " >>> Stopping old DHCPCD"
kill $(cat /var/run/dhcpcd-$LAN.pid)
sleep 1
fi
echo " >>> Starting DHCPCD"
dhcpcd $LAN
elif [ $CURRENT = "WLAN" ]; then
if [ -e "/var/run/dhcpcd-"$WLAN".pid" ]; then
echo " >>> Stopping old DHCPCD"
kill $(cat /var/run/dhcpcd-$WLAN.pid)
sleep 1
fi
echo " >>> Starting DHCPCD"
dhcpcd $WLAN
else
echo " !!! Error above, skipping..."
fi
fi
}
#Check the interface, and down it for remove old route. Used when changing profile, if you have manipulated the routing table before switch to another one.
fix_route() {
#check for second parameter "fix"
if [ -z $PARAM2 ]; then
echo " >>> First connection. Use 'fix' for remove old route problems."
elif [ $PARAM1 = "fix" ]; then
echo " >>> Fixing old routes"
if [ -z $CURRENT ]; then
echo " ??? Must I do something [*_*] ?"
elif [ $CURRENT = "LAN" ]; then
ifconfig $LAN down
sleep 1
elif [ $CURRENT = "WLAN" ]; then
ifconfig $WLAN down
sleep 1
else
echo " !!! Error above, skipping..."
fi
fi
}
#check the interface and prepare it for its set up. Call fix_route to check if user want to fix route.
start() {
if [ -z $CURRENT ]; then
echo " ??? You must specifie the CURRENT interface in your profile, by adding CURRENT="
elif [ $CURRENT = "LAN" ]; then
fix_route
ifconfig $LAN up
echo " >>> LAN is now UP..."
elif [ $CURRENT = "WLAN" ]; then
fix_route
ifconfig $WLAN up
echo " >>> WLAN is now UP..."
echo
wan_on
else
echo " Wrong value for CURRENT in your profile! Skipping..."
fi
}
#check the interface to shut down, and do it if needed
stop() {
if [ -z $PARAM2 ]; then
echo " ??? You must specifie the interface to shut down: lan or wlan !"
elif [ $PARAM2 = "lan" ]; then
ifconfig $LAN down
echo " >>> LAN interface is now DOWN !!!"
elif [ $PARAM2 = "wlan" ]; then
wan_off
ifconfig $WLAN down
echo " >>> WLAN interface is now DOWN !!!"
else
echo " !!! Wrong interface to shut down! Skipping..."
fi
}
#Help part of the script
help() {
echo " __________________________________"
echo " / / ___ ___ ___ \ / /|"
echo " / / / // // / \/ / |"
echo " / / / // //__/ /\ / /|"
echo " / /__ /__//__// ___ / \ / / |"
echo " +---------------------------------+ / /"
echo " | / / / / / / / / / / /|/ /"
echo " | Net-LooP {} {} {} Version 1.1 | /"
echo " |/ / / / / /^ / / / / / |/"
echo " +------------/_[-_-]_\------------+"
echo
echo " COMMAND LINE:"
echo " _-_-_-_-_-_-_"
echo " net-loop [ fix | status | stop | on | off | help ] [ PROFILE_NAME | STATUS_NAME | wan | lan ]"
echo
echo " PROFILE:"
echo " _-_-_-_-"
echo " To use a profile:"
echo " net-loop [fix] PROFILE_NAME"
echo
echo " The optional option 'fix' is used to remove old routes. Old routes is the remaining route, for exemple:"
echo " A= ifconfig $LAN 10.59.13.75 netmask 255.255.255.0 broadcast 10.59.13.255"
echo " route add default gw 10.59.13.254"
echo " B= ifconfig $LAN 10.59.13.75 netmask 255.255.255.0 broadcast 10.59.13.255"
echo " route add default gw 10.59.13.253"
echo
echo " You have activate the profile A. And now, you want to change to profile B. Just the default route are"
echo " different between A and B. If you use 'net-loop PROFILE_NAME' without the 'fix' argument, you will have"
echo " 2 default route !!! And now, the default route can't work correctly."
echo " So, if you use 'net-loop fix PROFILE_NAME', the default route of the preview profile"
echo " will be removed and no problem will occur."
echo
echo " UTILITIES:"
echo " _-_-_-_-_-"
echo " To fix specified 'bug' that you know what to do for getting work again."
echo " net-loop fix"
echo
echo " To get the status of your interfaces (no argument) or for other things (STATUS_NAME), you can add some 'if' in the"
echo " status function, like I have done for my VPN, used like this:"
echo " net-loop status [ vpn ]"
echo
echo " To stop an interface. Note: stopping a WLAN interface result by switching off radio frequency"
echo " net-loop stop [ lan | wlan ]"
echo
echo " To get this help, type this:"
echo " net-loop help"
echo
echo " WIRELESS (for notebook users)"
echo " _-_-_-_-_-_-_-_-_-_-_-_-_-_-_"
echo " You can activate or desactivate the wireless radio frequency by using this:"
echo " net-loop [ on | off ]"
echo
echo " Note: this will not shut down the interface (by ifconfig). It will only use the hardware switch"
echo " to stop emetting wireless. So, you can use your profile (using WLAN interface) and stop emetting"
echo " to preserve your battery.... and when you want, you re-active it, without re-activating a profile!"
echo
echo " SETTING UP:"
echo " _-_-_-_-_-_"
echo " You MUST edit this script to set up important things:"
echo " - the name of your LAN and WLAN interfaces ('ifconfig -a' and 'iwconfig' can be used to look up the name"
echo " of the corresponding interface)"
echo " - define the DEFAULT profile"
echo " - set up the command to activate or desactivate the wireless hardware switch (wan_on and wan_off)"
echo " - add and configure your profiles. See the example present IN this script."
echo
echo " No warranty, use this script at your own risk..."
echo
echo " FEATURE:"
echo " _-_-_-_-_"
echo " - profile storage for the configuration of your interfaces"
echo " - DHCPCD is automaticaly stopped if needed"
echo " - UP your interface before set it (don't use 'up' with 'ifconfig' when adding new profile)"
echo " - Activate one or more profile, and stop it. Radio switch will be desactivated if needed (for WAN)"
echo " - When changing profile, can remove old route configuration (use of 'fix')"
echo " - Function 'status' can be modified for add new status check (for vpn, or anything)"
echo " - You can set file /etc/resolv.conf in your profile, by using $DNS variable"
}
##################################################################################################################
########
# MAIN #
#########
#######
PARAM1=$1
PARAM2=$2 #received argument can't be used in a function, so i use another variable
PROFILE=$(typeset -F | grep -w $1 | sed -n 's:^declare -f ::p')
#start default profile
if [ -z $1 ]; then
echo ">>> Using default profile:" $DEFAULT ":"
$DEFAULT
#show status
elif [ $1 = "status" ]; then
status
#fix problems
elif [ $1 = "fix" ]; then
echo ">>> Fixing some problems :"
fix
#stop interface
elif [ $1 = "stop" ]; then
echo ">>> Stopping an interface :"
stop
#show help
elif [ $1 = "help" ]; then
echo ">>> I show you the help :"
help
#active the wireless switch
elif [ $1 = "on" ]; then
echo ">>> I will only activate your WLAN with the hardware switch..."
wan_on
#desactive the wireless switch
elif [ $1 = "off" ]; then
echo ">>> I will only desactivate your WLAN with the hardware switch"
wan_off
#try to acitve a profile
elif [ -z "$PROFILE" ]; then
echo "!!! Error: profile '"$1"' not found !"
else
echo ">>> Activating profile" $PROFILE ":"
$PROFILE
fi
echo
echo ">>> Done"
#END
|
_________________ Mon MediaWiki perso : http://pix-mania.dyndns.org
Last edited by loopx on Sun Jan 15, 2006 7:01 pm; edited 9 times in total |
|
Back to top |
|
|
dapsaille Advocate
Joined: 02 Aug 2004 Posts: 2366 Location: Paris
|
Posted: Thu Jan 12, 2006 11:33 am Post subject: |
|
|
Sympa ton script :p
Pui - je me permettre de le récuperer pour le migrer en Xdialog ?? |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
|
Back to top |
|
|
adrienleroy n00b
Joined: 02 Dec 2004 Posts: 74 Location: Lille,France
|
Posted: Thu Jan 12, 2006 5:41 pm Post subject: |
|
|
j'utilise depuis peu un programme fort utile netswitch il est encore en developpement mais est deja tres performant et tres aboutit
http://netswitch.tuxfamily.org/en/index.html |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Thu Jan 12, 2006 10:03 pm Post subject: |
|
|
L'intéret est ici, de ne pas avoir de gui (enfin, c'est pas un intérret.. grace à ca, on peu le porter sur n'importe quelle machine Linux), en ensuite, il ne fait pas QUE configurer le réseau, il peu très bien faire plus, par exemple: activation de certain service, etc...
Donc, le but, est d'associé une liste de commande à un profile, commande permettant biensur de configurer le réseau, et en plus de faire ce que vous devriez faire normalement (par exemple, activation de distcc .... etc ... etc...). _________________ Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
Back to top |
|
|
truc Advocate
Joined: 25 Jul 2005 Posts: 3199
|
Posted: Sat Jan 14, 2006 12:10 am Post subject: |
|
|
arf dsl d'intervenir pour ça, j'ai juste lu quelque ligne au départ et euh voila..:
Code: | So, you can easily use this script to store your different configurations
# in ONE and unique file, who is a script. |
which is a script ? |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Sat Jan 14, 2006 12:54 am Post subject: |
|
|
truc wrote: | arf dsl d'intervenir pour ça, j'ai juste lu quelque ligne au départ et euh voila..:
Code: | So, you can easily use this script to store your different configurations
# in ONE and unique file, who is a script. |
which is a script ? |
oh, je corrige de suite _________________ Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Sat Jan 14, 2006 8:27 pm Post subject: |
|
|
- problème dhcpcd corrigé
- profile erroné => profile not found, et non command not found par bash
- j'ai fais le ménage
- et on peu ajouter d'autre truc pour le status (net-loop status vpn par exemple) _________________ Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Sun Jan 15, 2006 6:55 pm Post subject: |
|
|
encore une bêtise en plus: la variable $DNS contient le chemin et le fichier resolv.conf.
Si le profile n'utilise pas le DHCP, alors, utiliser un echo "blabla" >/>> $DNS pour régler le dns automatiquement _________________ Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
Back to top |
|
|
bllgtse n00b
Joined: 28 Mar 2005 Posts: 24
|
Posted: Sat Jan 21, 2006 12:36 pm Post subject: |
|
|
Salut Loopx,
Je suis le dev de Netswitch. Je tenais à corriger une petite info.
Netswitch n'a pas besoin de GUI pour fonctionner, il a un script (globalement dans le même esprit que le tien), une bibilothèque pour interagir avec elle, et au dessus de tout ça... bien loin ... une appli GTK+ (et bientot peut-être une appli KDE).
Si tu veux participer pour ajouter des fonctions, je suis open |
|
Back to top |
|
|
loopx Advocate
Joined: 01 Apr 2005 Posts: 2787 Location: Belgium / Liège
|
Posted: Sat Jan 21, 2006 4:44 pm Post subject: |
|
|
@bllgtse:
Salut, oki, c'est noté. Mais pour la participation, je préfère garder mon script et l'améliorer plus tard. C'est pas que je suis contre Netswitch, mais vu que je l'avais pas vu et que j'ai commencer un script perso, je préfère continuer le mien.
Bah, ce sera jamais qu'un tit script tout simple, et moi aussi j'y rajouterai peut etre bien une application graphique pour gérer tout ca.
Je ferais un script plus générique (avec utilisation de plusieurs carte réso, et pas 2 max) un peu plus tard, je suis en exam .
Si t'es intéressé par un truc dans mon script, n'hésite pas à l'utiliser . _________________ Mon MediaWiki perso : http://pix-mania.dyndns.org |
|
Back to top |
|
|
gulivert l33t
Joined: 17 Jun 2004 Posts: 863 Location: Switzerland
|
Posted: Sun Jan 22, 2006 10:45 am Post subject: |
|
|
bllgtse wrote: | Salut Loopx,
Je suis le dev de Netswitch. Je tenais à corriger une petite info.
Netswitch n'a pas besoin de GUI pour fonctionner, il a un script (globalement dans le même esprit que le tien), une bibilothèque pour interagir avec elle, et au dessus de tout ça... bien loin ... une appli GTK+ (et bientot peut-être une appli KDE).
Si tu veux participer pour ajouter des fonctions, je suis open |
Joli beau travail, personelement j'utilise netswitch avec le GUI GTK et il me va très bien, ainsi qu'à ma copine qui n'est pas trop callée ligne de commande, du coup le coup du GUI est bien pensé.
Bonne continuation pour ton logiciel. _________________ Macbook Pro Unibody 9.1 - Kernel 4.4.6 - Awesome 3.5 |
|
Back to top |
|
|
maxux n00b
Joined: 25 Jul 2010 Posts: 10
|
Posted: Sun Dec 18, 2011 10:01 pm Post subject: |
|
|
Oh, un étudiant de l'inpres ? |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|