| View previous topic :: View next topic |
| Author |
Message |
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
 Posted: Tue Apr 15, 2003 8:14 am Post subject: no IP on boot |
 |
|
I have installed gentoo but now when I boot I don't get an IP.
I have compiled the 3C59X driver as a module and added it to modules.autoload so it gets loaded on startup.
When it tries to get an ip-adres I get the following error:
"bringing eth0 up
failed to bring eth0 up
ERROR: Problem starting needed services
"netmount" was not started"
When I try to set a fix IP, I can ping it, but I can not ping any other computer on the network.
I don't seem to find the problem.
Any ideas? |
|
| Back to top |
|
 |
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Tue Apr 15, 2003 8:20 pm Post subject: |
|
|
| someone must have a clue. |
|
| Back to top |
|
|
slartibartfasz
Veteran
Joined: 29 Oct 2002
Posts: 1462
Location: Vienna, Austria
|
| Posted: Tue Apr 15, 2003 9:21 pm Post subject: |
|
|
apparently eth0 cannot start because it needs netmount to start first...
the question is not if u have an ip or not but if your card works or not
please provide the output of the following comands:
| Code: | ifconfig -a
dmesg | grep eth |
we should know more then...
_________________
To an engineer the glass is neither half full, nor half empty - it is just twice as big as it needs to be. |
|
| Back to top |
|
|
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Wed Apr 16, 2003 4:46 am Post subject: |
|
|
ifconfig -a:
Link encap:Ethernet HWadd 00:10:5A:C8:18:D0
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:60 frame:0
TX packets:4 errors:0 dropped:0 overruns:60 carrier:0
collisions:0 txqueuelen:100
RX bytes:4153 (4.0 Kb) TX bytes:2360 (2.3 Kb)
interrupt:11 Base address:0xe800
dmesg | grep eth
nothing shows up
dmesg | grep 3c59x
There is a line where it mentions this.
I'm using a 3c905b-tx network card.
I compiled the driver as a module and added it to /etc/modules.autoload
also configured /etc/conf.d/net for dhcp. |
|
| Back to top |
|
|
sulu
Guru
Joined: 21 May 2002
Posts: 399
Location: Dornbirn/Austria
|
| Posted: Wed Apr 16, 2003 6:12 am Post subject: |
|
|
Try to start the ethernet manually
/etc/init.d/net.eth0 restart
But what troubles me is the "netmount" problem.
Did you add the eth0 to the boot via:
rc-update add net.eth0 default
? |
|
| Back to top |
|
|
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Wed Apr 16, 2003 6:38 am Post subject: |
|
|
I'll try this evening
I have always added eth0 to boot with
rc-update net.eth0 default. (did this when I tried to configure a fixed IP to see if that worked)
I will try to start the ethernet manually this evening (now at work) |
|
| Back to top |
|
|
StuBear
Apprentice
Joined: 26 Feb 2003
Posts: 157
Location: Melbourne,AUSTRALIA
|
| Posted: Wed Apr 16, 2003 11:44 am Post subject: |
|
|
| sulu wrote: | | But what troubles me is the "netmount" problem. |
If I recall correctly "netmount" is a gentoo runscript that mounts any ntfs drives. It dies because eth0 is not up - hence no net drives are available for mounting.
Check that your nic driver is loaded with "lsmod". If it's not then either you have a typo in modules.autoload. Try "modprobe 3C59X ", if you get any errors they will point you to the problem. It could be a capital/lowercase thing - check that your driver is named 3C59X and not 3C59x or 3c59x - I've been stuck by this with soundcard drivers.
If your nic driver is loaded then try
"/etc/init.d/net.eth0 restart" as suggested, you will probably get errors about net.eth0 not being started, if so use
"/etc/init.d/net.eth0 zap" to kill it and
"/etc/init.d/net.eth0 start" to try starting it again. Errors here usually point to a typo or invalid ip number in /etc/conf/net.eth0.
hope this helps |
|
| Back to top |
|
|
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Wed Apr 16, 2003 11:45 am Post subject: |
|
|
Another question
How do i configure Udhcp or dhcp so that it works to get an ip-address?
I want to replace dhcpcd with one of these two |
|
| Back to top |
|
|
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Thu Apr 17, 2003 4:29 am Post subject: |
|
|
still nothin,
I did everything you suggested but still nothing.
I even tried with dhclient instead of dhcpcd but it doesn't work.
The strange thing is that it works when I boot the Live-cd (sound logical since I used it to install gentoo).
But once I boot into my new system, it just doesn't work.
Does anyone knows what has changed between the latest live-cd and a new installation of gentoo? |
|
| Back to top |
|
|
runt
Apprentice
Joined: 27 Nov 2002
Posts: 197
Location: /dev/null
|
| Posted: Thu Apr 17, 2003 4:42 am Post subject: |
|
|
| I'm not sure what changed, but I am having the same problem now. I cannot get eth0 to come up no matter what I do, but eth1 (which has a static IP and is on my internal network) comes up fine. Kinda sucks since I cannot do anything online without eth0 working. |
|
| Back to top |
|
|
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Thu Apr 17, 2003 4:59 am Post subject: |
|
|
I think it's not a problem with my setup then, I do everything like it should but it just does not work.
There has to be a problem with the installation script or the installation itself that brakes it.
I'm going to try to change the IRQ of the card, since I noticed that under windows it's using IRQ18 and under Linux IRQ11 |
|
| Back to top |
|
|
sulu
Guru
Joined: 21 May 2002
Posts: 399
Location: Dornbirn/Austria
|
| Posted: Thu Apr 17, 2003 1:39 pm Post subject: |
|
|
Hmmmm....
Live is about solving problems .... 
I can only think of the following reasons.
1.) You have a typo in /etc/conf.d/net
2.) DHCP produces some unnoticed error
3.) The startup script is somewhat broken
Youd could add some debug messages to the net.eth0 script to monitor its progress during startup.
Another thing what makes me wonder is:
| Quote: |
dmesg | grep 3c59x
There is a line where it mentions this.
I'm using a 3c905b-tx network card.
|
3c59x uses afaik a different driver than 3c905b |
|
| Back to top |
|
|
runt
Apprentice
Joined: 27 Nov 2002
Posts: 197
Location: /dev/null
|
| Posted: Thu Apr 17, 2003 4:59 pm Post subject: |
|
|
| I am starting to think that something is messed up in the startup script, since I cannot get it to work with a Linksys LNE100TX (tulip driver) or a RTL8139B (8139too driver). |
|
| Back to top |
|
|
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Thu Apr 17, 2003 6:17 pm Post subject: |
|
|
| runt wrote: | | I am starting to think that something is messed up in the startup script, since I cannot get it to work with a Linksys LNE100TX (tulip driver) or a RTL8139B (8139too driver). |
I think so too.
We have to find a way to copy the script from the live-cd to our gentoo installation, but I have no idea how to do that.
I think that might work. |
|
| Back to top |
|
|
A-star
n00b
Joined: 05 Jun 2002
Posts: 43
|
| Posted: Wed Apr 23, 2003 12:41 pm Post subject: |
|
|
Despite all my efforts I still have no network connection.
I'll try gentoo again, when the final 1.4 comes out. |
|
| Back to top |
|
|
r0cket-
n00b
Joined: 16 Apr 2003
Posts: 62
|
| Posted: Wed Apr 23, 2003 2:20 pm Post subject: |
|
|
| sulu wrote: |
Another thing what makes me wonder is:
| Quote: |
dmesg | grep 3c59x
There is a line where it mentions this.
I'm using a 3c905b-tx network card.
|
3c59x uses afaik a different driver than 3c905b |
No, same driver. 3c59x should support all 3Com 3c905 NICs, along with assorted other PCI, EISA, and CardBus adapters. 3Com provides its own driver, 3c90x, which supports 3C905, 3C900, and 3C980 series adapters. It might be worth trying the 3c90x driver, but the 3c59x driver should work just fine with that card. |
|
| Back to top |
|
|
r0cket-
n00b
Joined: 16 Apr 2003
Posts: 62
|
| Posted: Wed Apr 23, 2003 2:36 pm Post subject: |
|
|
| A-star wrote: | Despite all my efforts I still have no network connection.
I'll try gentoo again, when the final 1.4 comes out. |
Try moving the card to another slot in the system. Also, it sounds like you're dual-booting, so it would probably be a good idea to do a full shutdown and pull the power from the system for a while before booting back into Linux.
When you bring the interface up, do you get a link light on the card? |
|
| Back to top |
|
|
guero61
l33t
Joined: 14 Oct 2002
Posts: 811
Location: Behind you
|
| Posted: Wed Apr 23, 2003 2:48 pm Post subject: |
|
|
Maybe I should have stepped in sooner; I thought someone would bring it up.
This has been a continuing issue for any kernel more modified than vanilla-sources-2.4.20. There seem to be two fixes for this:
1. You have APIC compiled into your kernel. Turn it off by either recompiling a kernel without APIC support or adding "noapic" to your kernel arguments.
2. Add the argument "pci=noacpi" to your kernel.
Evidently the patched and development kernels contain APIC and/or ACPI code that interfere with the proper operation of specific NIC's: the RealTek 8139, tulip, and 3com 5xx chipsets seem the most affected.
To reiterate, this is not a problem with Gentoo, specifically, but with the kernel
(stress not intended to offend).
I'll submit a FAQ so this issue will be addressed from here on. Hope that it's what is wrong with your install!
[edit] Adding info from lower posts to make one reference point.
APIC stands for "Advanced Programmable Interrupt Controller" instead of "Advanced Configuration and Power Interface", and it's in the "Processor type and features" menu instead of "General Setup".
They are two different things; make sure you deal with them separately. If you have an SMP kernel, it will automatically use the local APIC; you'll need to pass
to your kernel at boot time. It seems that in some extreme cases, noapic can cause a minor degradation in performance, as all IRQ interrupts are handled by one processor, but should cause no evident difference in a desktop environment.
[/edit]
Last edited by guero61 on Fri May 16, 2003 1:21 pm; edited 3 times in total |
|
| Back to top |
|
|
runt
Apprentice
Joined: 27 Nov 2002
Posts: 197
Location: /dev/null
|
| Posted: Wed Apr 23, 2003 4:14 pm Post subject: |
|
|
| guero61 wrote: | Maybe I should have stepped in sooner; I thought someone would bring it up.
This has been a continuing issue for any kernel more modified than vanilla-sources-2.4.20. There seem to be two fixes for this:
1. You have APIC compiled into your kernel. Turn it off.
2. Add the argument "pci=noacpi" to your kernel boot line.
Evidently the patched and development kernels contain APIC and/or ACPI code that interfere with the proper operation of specific NIC's: the RealTek 8139, tulip, and 3com 5xx chipsets seem the most affected.
To reiterate, this is not a problem with Gentoo, specifically, but with the kernel
(stress not intended to offend).
I'll submit a FAQ so this issue will be addressed from here on. Hope that it's what is wrong with your install! |
Well, that would be nice, but I have no power management support compiled into my kernel. I also tried adding "pci=noacpi" to my kernel line of my grub.conf and it still doesn't work. |
|
| Back to top |
|
|
guero61
l33t
Joined: 14 Oct 2002
Posts: 811
Location: Behind you
|
| Posted: Wed Apr 23, 2003 4:47 pm Post subject: |
|
|
What about APIC, though? It's a different beast than ACPI, stands for "Advanced Programmable Interrupt Controller" instead of "Advanced Configuration and Power Interface", and it's in the "Processory type and features" menu instead of "General Setup".
If you already know that, great! |
|
| Back to top |
|
|
runt
Apprentice
Joined: 27 Nov 2002
Posts: 197
Location: /dev/null
|
| Posted: Wed Apr 23, 2003 4:53 pm Post subject: |
|
|
I don't see APIC support under "Processor type and features".
<edit>
The system having the trouble is an old dual Pentium 233MMX box using a Tyan Tomcat IIID
</edit> |
|
| Back to top |
|
|
guero61
l33t
Joined: 14 Oct 2002
Posts: 811
Location: Behind you
|
| Posted: Wed Apr 23, 2003 8:09 pm Post subject: |
|
|
There's the issue. As an SMP system, the local APIC is automagically used; you can pass "noapic" as a kernel argument. It may degrade performance slightly, but a quick google search turned up this mailinglist answer wherein it it is essentially said that it won't make much of a difference except under extremely heavy load.
[edit]
This google search gives several comments on what performance loss/gains could be incurred by passing "noapic" to the kernel. A viable choice, I think.
[/edit] |
|
| Back to top |
|
|
runt
Apprentice
Joined: 27 Nov 2002
Posts: 197
Location: /dev/null
|
| Posted: Thu Apr 24, 2003 1:36 am Post subject: |
|
|
Ok, do you see anything wrong with my grub.conf below? For some reason, my Linksys LNE100TX still won't work (tulip driver), but my RTL8139B (8139too driver) works fine as long as I give it a static IP.
| Code: |
default 0
timeout 10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title=Gentoo
root (hd0,0)
kernel (hd0,0)/boot/bzImage root=/dev/hda3 "noapic"
|
|
|
| Back to top |
|
|
guero61
l33t
Joined: 14 Oct 2002
Posts: 811
Location: Behind you
|
| Posted: Thu Apr 24, 2003 1:55 am Post subject: |
|
|
| Code: |
default 0
timeout 10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title=Gentoo
root (hd0,0)
kernel (hd0,0)/boot/bzImage root=/dev/hda3 noapic
|
Note the lack of quotes around noapic. Generally, we will put quotes around an item that needs to be specifically as laid out, always less the quotes. (Of course, unless otherwise stated.)  |
|
| Back to top |
|
|
runt
Apprentice
Joined: 27 Nov 2002
Posts: 197
Location: /dev/null
|
| Posted: Thu Apr 24, 2003 1:58 am Post subject: |
|
|
Hey, I'm tired and just got done with work. 
<edit>
Still doesn't work. Here is all the info that might be useful.
lsmod output
| Code: |
server grub # lsmod
Module Size Used by Not tainted
rtc 7228 0 (autoclean)
megaraid 26061 1
8139too 16136 1
mii 2400 0 [8139too]
tulip 40544 0
|
dmesg output
| Code: |
server grub # dmesg |more
Linux version 2.4.20-gentoo-r2 (root@cdimage) (gcc version 3.2.2) #6 SMP Wed Apr
16 08:26:51 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000e000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
224MB LOWMEM available.
found SMP MP-table at 000f5db0
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 57344
zone(0): 4096 pages.
zone(1): 53248 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) APIC version 17
Processor #1 Pentium(tm) APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: root=/dev/hda3 noapic
Initializing CPU#0
Detected 232.657 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 463.66 BogoMIPS
Memory: 223012k/229376k available (2161k kernel code, 5980k reserved, 758k data,
132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After generic, caps: 008003bf 00000000 00000000 00000000
CPU: Common caps: 008003bf 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: After generic, caps: 008003bf 00000000 00000000 00000000
CPU: Common caps: 008003bf 00000000 00000000 00000000
CPU0: Intel Pentium MMX stepping 03
per-CPU timeslice cutoff: 160.30 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 463.66 BogoMIPS
CPU: After generic, caps: 008003bf 00000000 00000000 00000000
CPU: Common caps: 008003bf 00000000 00000000 00000000
CPU1: Intel Pentium MMX stepping 03
Total of 2 processors activated (927.33 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-12, 2-16, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 003 03 0 0 0 0 0 1 1 79
0e 003 03 0 0 0 0 0 1 1 81
0f 003 03 0 0 0 0 0 1 1 89
10 000 00 1 0 0 0 0 0 0 00
11 003 03 1 1 0 1 0 1 1 91
12 003 03 1 1 0 1 0 1 1 99
13 003 03 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:17
IRQ11 -> 0:19
IRQ12 -> 0:18
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 232.6473 MHz.
..... host bus clock speed is 66.4705 MHz.
cpu: 0, clocks: 664705, slice: 221568
CPU0<T0:664704,T1:443136,D:0,S:221568,C:664705>
cpu: 1, clocks: 664705, slice: 221568
CPU1<T0:664704,T1:221568,D:0,S:221568,C:664705>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb540, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7000] at 00:07.0
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I
RQ DETECT_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
hdb: LS-120 VER5 00 UHD Floppy, ATAPI FLOPPY drive
hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0453a44, I/O limit 4095Mb (mask 0xffffffff)
hda: 20066251 sectors (10274 MB) w/1902KiB Cache, CHS=19906/16/63, (U)DMA
hdc: ATAPI 48X CD-ROM drive, 120kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0:<7>ldm_validate_partition_table(): Found an MS
-DOS partition table, not a dynamic disk.
p1 p2 p3
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0x6000, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
uhci.c: detected 2 ports
usb.c: kmalloc IF c139e220, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: 6000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c139e220
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
uhci.c: 6000: suspend_hc
reiserfs:warning: CONFIG_REISERFS_CHECK is set ON
reiserfs:warning: - it is slow mode for debugging.
reiserfs: checking transaction log (device 03:03) ...
journal-1153: found in header: first_unflushed_offset 483, last_flushed_trans_id
19033
journal-1206: Starting replay from offset 483, trans_id 19034
journal-1299: Setting newest_mount_id to 27
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k freed
Adding Swap: 499960k swap-space (priority -1)
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
eth0: ADMtek Comet rev 17 at 0xce90b000, 00:04:5A:5E:D7:67, IRQ 10.
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 Fast Ethernet at 0x6400, 00:e0:4c:39:04:7e, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139B'
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: found 0x101e:0x9010:idx 0:bus 0:slot 18:func 0
scsi0 : Found a MegaRAID controller at 0x6810, IRQ: 12
megaraid: [A :A ] detected 1 logical drives
megaraid: channel[1] is raid.
megaraid: channel[2] is raid.
megaraid: channel[3] is raid.
scsi0 : LSI Logic MegaRAID A 254 commands 16 targs 6 chans 7 luns
scsi0: scanning channel 0 for devices.
scsi0: scanning channel 1 for devices.
scsi0: scanning channel 2 for devices.
scsi0: scanning virtual channel 1 for logical drives.
Vendor: MegaRAID Model: LD0 RAID5 34728R Rev: A
Type: Direct-Access ANSI SCSI revision: 02
scsi0: scanning virtual channel 2 for logical drives.
scsi0: scanning virtual channel 3 for logical drives.
scsi0: scanning virtual channel 4 for logical drives.
Attached scsi disk sda at scsi0, channel 3, id 0, lun 0
SCSI device sda: 71122944 512-byte hdwr sectors (36415 MB)
/dev/scsi/host0/bus3/target0/lun0:<7>ldm_validate_partition_table(): Found an M
S-DOS partition table, not a dynamic disk.
p1
reiserfs:warning: CONFIG_REISERFS_CHECK is set ON
reiserfs:warning: - it is slow mode for debugging.
reiserfs: checking transaction log (device 08:01) ...
journal-1153: found in header: first_unflushed_offset 96, last_flushed_trans_id
41
journal-1206: Starting replay from offset 96, trans_id 42
journal-1299: Setting newest_mount_id to 26
Using r5 hash to sort names
ReiserFS version 3.6.25
Real Time Clock Driver v1.10e
eth1: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
|
my /etc/conf.d/net
| Code: |
server grub # cat /etc/conf.d/net |more
# /etc/conf.d/net:
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/conf.d/net,v 1.7 2002/11/18 1
9:39:22 azarah Exp $
# Global config file for net.* rc-scripts
# This is basically the ifconfig argument without the ifconfig $iface
#
#iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0"
#iface_eth1="207.170.82.202 broadcast 207.0.255.255 netmask 255.255.0.0"
iface_eth1="192.168.1.99 broadcast 192.168.1.255 netmask 255.255.255.0"
# For DHCP set iface_eth? to "dhcp"
# For passing options to dhcpcd use dhcpcd_eth?
#
iface_eth0="dhcp"
#iface_eth1="dhcp"
#dhcpcd_eth0="..."
# For adding aliases to a interface
#
#alias_eth0="192.168.0.3 192.168.0.4"
# NB: The next is only used for aliases.
#
# To add a custom netmask/broadcast address to created aliases,
# uncomment and change accordingly. Leave commented to assign
# defaults for that interface.
#
#broadcast_eth0="192.168.0.255 192.168.0.255"
#netmask_eth0="255.255.255.0 255.255.255.0"
# For setting the default gateway
#
#gateway="eth0/192.168.0.1"
|
If there is any other output you would like to see just let me know. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
