View previous topic :: View next topic |
Author |
Message |
ErichMaier n00b
Joined: 05 Nov 2005 Posts: 9
|
Posted: Wed Nov 16, 2005 4:17 pm Post subject: compile acx100 fails |
|
|
Hi
i have the problem to compile the acx100 driver!
this is the displayed message:
Code: |
>>> Unpacking craig.tar.bz2 to /var/tmp/portage/acx100-0.2.4/work
>>> Source unpacked.
* Preparing acx_pci module
make: Entering directory `/usr/src/linux-2.6.14-gentoo-r2'
CC [M] /var/tmp/portage/acx100-0.2.4/work/wlan.o
In file included from /var/tmp/portage/acx100-0.2.4/work/acx.h:5,
from /var/tmp/portage/acx100-0.2.4/work/wlan.c:50:
/var/tmp/portage/acx100-0.2.4/work/acx_struct.h:233:5: warning: "OLD_FIRMWARE_VERSIONS" is not defin ed
/var/tmp/portage/acx100-0.2.4/work/wlan.c:157:5: warning: "UNUSED" is not defined
CC [M] /var/tmp/portage/acx100-0.2.4/work/conv.o
In file included from /var/tmp/portage/acx100-0.2.4/work/acx.h:5,
from /var/tmp/portage/acx100-0.2.4/work/conv.c:43:
/var/tmp/portage/acx100-0.2.4/work/acx_struct.h:233:5: warning: "OLD_FIRMWARE_VERSIONS" is not defin ed
/var/tmp/portage/acx100-0.2.4/work/conv.c:296:5: warning: "DEBUG_CONVERT" is not defined
/var/tmp/portage/acx100-0.2.4/work/conv.c:556:5: warning: "DEBUG_CONVERT" is not defined
CC [M] /var/tmp/portage/acx100-0.2.4/work/helper2.o
In file included from /var/tmp/portage/acx100-0.2.4/work/acx.h:5,
from /var/tmp/portage/acx100-0.2.4/work/helper2.c:50:
/var/tmp/portage/acx100-0.2.4/work/acx_struct.h:233:5: warning: "OLD_FIRMWARE_VERSIONS" is not defin ed
/var/tmp/portage/acx100-0.2.4/work/helper2.c:1366:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.4/work/helper2.c:1383:5: warning: "BOGUS_ITS_NOT_A_NULL_FRAME_HANDLER_AT _ALL" is not defined
/var/tmp/portage/acx100-0.2.4/work/helper2.c:1906:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.4/work/helper2.c:2343:5: warning: "THIS_IS_TROUBLESOME" is not defined
/var/tmp/portage/acx100-0.2.4/work/helper2.c:2496:6: warning: "POWER_SAVE_80211" is not defined
/var/tmp/portage/acx100-0.2.4/work/helper2.c:2502: warning: `acx_s_activate_power_save_mode' defined but not used
CC [M] /var/tmp/portage/acx100-0.2.4/work/ioctl.o
In file included from /var/tmp/portage/acx100-0.2.4/work/acx.h:5,
from /var/tmp/portage/acx100-0.2.4/work/ioctl.c:46:
/var/tmp/portage/acx100-0.2.4/work/acx_struct.h:233:5: warning: "OLD_FIRMWARE_VERSIONS" is not defin ed
/var/tmp/portage/acx100-0.2.4/work/ioctl.c:758:5: warning: "ENODATA_TO_BE_USED_AFTER_SCAN_ERROR_ONLY " is not defined
In file included from /var/tmp/portage/acx100-0.2.4/work/ioctl.c:2173:
/var/tmp/portage/acx100-0.2.4/work/setrate.c:85:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.4/work/ioctl.c:2627: error: unknown field `spy_offset' specified in init ializer
/var/tmp/portage/acx100-0.2.4/work/ioctl.c:2627: warning: initialization makes pointer from integer without a cast
make[1]: *** [/var/tmp/portage/acx100-0.2.4/work/ioctl.o] Error 1
make: *** [_module_/var/tmp/portage/acx100-0.2.4/work] Error 2
make: Leaving directory `/usr/src/linux-2.6.14-gentoo-r2'
!!! ERROR: net-wireless/acx100-0.2.4 failed.
!!! Function linux-mod_src_compile, Line 505, Exitcode 2
!!! Unable to make -C /usr/src/linux SUBDIRS=/var/tmp/portage/acx10 0-0.2.4/work modules.
!!! If you need support, post the topmost build error, NOT this status message.
|
ca somone help me please.
Thank you |
|
Back to top |
|
|
b4max n00b
Joined: 14 Jun 2005 Posts: 15 Location: Germany
|
Posted: Thu Nov 17, 2005 12:30 pm Post subject: same here |
|
|
maybe something changed with the 2.6.14-kernels? I get the very same error. Here my emerge --info.
Code: | Portage 2.0.53_rc7 (default-linux/x86/2005.0, gcc-3.4.4, glibc-2.3.5-r3, 2.6.14-gentoo-r2 i686)
=================================================================
System uname: 2.6.14-gentoo-r2 i686 AMD Duron(tm) Processor
Gentoo Base System version 1.12.0_pre10
dev-lang/python: 2.3.4-r1, 2.4.2
sys-apps/sandbox: 1.2.13
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils: 2.16.1
sys-devel/libtool: 1.5.20-r1
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=athlon -fomit-frame-pointer -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/share/config /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -march=athlon -fomit-frame-pointer -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks sandbox sfperms strict"
GENTOO_MIRRORS="http://gentoo.osuosl.org/ http://gentoo.seren.com/gentoo ftp://ftp.las.ic.unicamp.br/pub/gentoo/ http://mirror.datapipe.net/gentoo http://www.las.ic.unicamp.br/pub/gentoo/ http://gentoo.chem.wisc.edu/gentoo/ http://gentoo.mirrors.tds.net/gentoo http://gentoo.arcticnetwork.ca/ http://mirrors.acm.cs.rpi.edu/gentoo/"
LANG="pt_BR.ISO8859-1"
LC_ALL="pt_BR"
LINGUAS="pt_BR de en"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.samerica.gentoo.org/gentoo-portage"
USE="x86 3dnow 3dnowext X a52 aac acl acpi acpi4linux alsa apm arts artswrappersuid async athena audiofile avi bash-completion bdf berkdb bitmap-fonts bootsplash bzip2 bzlib cddb cdparanoia cdr cjk codecs crypt css curl dga divx4linux djbfft dlloader dvd dvdr dvdread edl eds encode esd exif expat faac faad fam fbcon ffmpeg fftw firefox flac flash font-server foreign-package ftp gdbm gif gimp glut gmp gpm gs gstreamer gtk gtk2 icq idn imagekits imlib imlib2 intl ithreads jabber javascript jce jikes jp2 jpeg jpeg2k kde lcd lcms libg++ libgda libsamplerate libwww live lm_sensors lzo lzw lzw-tiff m17n-lib mad matroska mcal mikmod mime mimencode ming mmap mmx mmx2 mng motif mozdevelop moznocompose moznoirc moznomail mozplaintext mozsvg mozxmlterm mp3 mpeg mpeg4 mpi mplayer msn mule musicbrainz ncurses nls nptl nptlonly ntlm oac offensive ogg oggvorbis openal opengl openssh oscar oss pam parse-clocks pcre pdf pdflib perl pic pie png pnp portaudio posix pthreads pvm python qt quicktime readline real rrdtool rtc samba sdl server shaper shared sharedmem silc simplexml slang smime sms sndfile soap sockets sox spell sse ssl svg symlink tcpd tga theora threads tidy tiff timidity tos transcode truetype truetype-fonts trusted ttcp type1 type1-fonts udev unicode usb v4l v4l2 vcd vcdimager vnc vorbis wavelan wifi wildlsearch win32codecs winbind wmf xanim xinerama xml2 xmms xosd xpm xscreensaver xsl xv xvid xvmc yahoo yv12 zlib linguas_pt_BR linguas_de linguas_en userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CTARGET, LDFLAGS, MAKEOPTS |
What Kernel-options need to be enabled/disabled? Can someone help? |
|
Back to top |
|
|
Hotblack n00b
Joined: 28 Dec 2004 Posts: 46
|
Posted: Fri Nov 18, 2005 9:07 am Post subject: |
|
|
Same problem here, after upgrading to 2.6.14 |
|
Back to top |
|
|
opti007 n00b
Joined: 18 Nov 2005 Posts: 2
|
Posted: Fri Nov 18, 2005 5:07 pm Post subject: |
|
|
I've got the same problem, using kernel 2.6.14.
Does anyone have a solution for this problem, otherwise I'll have to downgrade |
|
Back to top |
|
|
ErichMaier n00b
Joined: 05 Nov 2005 Posts: 9
|
Posted: Sat Nov 19, 2005 9:28 am Post subject: |
|
|
I have compile the 2.12.6 kernel and its works fantastic! |
|
Back to top |
|
|
bonzai2024 n00b
Joined: 10 Nov 2005 Posts: 31
|
Posted: Sat Nov 19, 2005 8:08 pm Post subject: |
|
|
same problem with 2.6.14 ...
"I have compile the 2.12.6 kernel and its works fantastic!"
you mean 2.6.12 ? |
|
Back to top |
|
|
ErichMaier n00b
Joined: 05 Nov 2005 Posts: 9
|
Posted: Sat Nov 19, 2005 8:58 pm Post subject: |
|
|
yes, you 're right! kernel 2.6.12!! |
|
Back to top |
|
|
TRauMa n00b
Joined: 26 Nov 2002 Posts: 43 Location: Germany
|
Posted: Sun Nov 20, 2005 3:30 pm Post subject: |
|
|
The acx100 driver gentoo uses is historic anyway. Here is an ebuild that works with 2.6.14:
Code: |
# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /usr/local/portage/net-wireless/acx100/acx100-0.3.18.ebuild,v 1 2005/11/02 09:52:22 trauma Exp $
inherit linux-mod
DESCRIPTION="Driver for the ACX100 and ACX111 wireless chipset (CardBus, PCI, USB)"
HOMEPAGE="http://acx100.sourceforge.net/"
SRC_URI="http://195.66.192.167/linux/acx_patches/acx-20051031.tar.bz2
http://195.66.192.167/linux/acx_patches/fw.tar.bz2"
LICENSE="GPL-2 as-is"
SLOT="0"
KEYWORDS="x86"
IUSE="pcmcia"
RESTRICT="nomirror"
RDEPEND=">=sys-apps/hotplug-20040923
net-wireless/wireless-tools"
S=${WORKDIR}
MODULE_NAMES="acx(net:${S})"
CONFIG_CHECK="NET_RADIO FW_LOADER"
# KERNELVER=${KV_FULL} KERNELDIR=${KV_DIR} KERNEL_BUILD=${KV_DIR}
#SUBDIRS=${S} WLAN_HOSTIF=WLAN_PCI"
BUILD_TARGETS="modules"
MODULESD_ACX_PCI_ADDITIONS=" " #needed to clear out previous setting which caused problems with new ver
#KERNEL_VER=KERNEL_VER=${KV_FULL}
#KERNEL_BUILD=/lib/modules/\$KERNEL_VER/build:KERNEL_BUILD=${KV_DIR}:
pkg_setup() {
linux-mod_pkg_setup
BUILD_PARAMS="-C ${KV_DIR} SUBDIRS=${S}"
}
src_unpack() {
unpack ${A}
cd ${S}
sed -e 's:usr/share/acx:lib/firmware:' -i common.c || die "Fixing firmware directory failed"
}
src_install() {
linux-mod_src_install
dodoc README doc/*
insinto /lib/firmware
doins fw/acx111_1.2.1.34/* fw/acx100_1.9.8.b/* fw/acx100_1.0.9-USB/*
}
pkg_postinst() {
update_depmod
update_modules
update_moduledb
einfo "Please run 'etc-update' and then 'update-modules' to complete install"
}
|
I'd post it to bugzilla, but I'm lazy... |
|
Back to top |
|
|
indrek n00b
Joined: 17 Apr 2005 Posts: 6
|
Posted: Sun Nov 20, 2005 5:03 pm Post subject: |
|
|
TRauMa wrote: | The acx100 driver gentoo uses is historic anyway. Here is an ebuild that works with 2.6.14:
I'd post it to bugzilla, but I'm lazy... |
The ebuild worked for me. I encourage you to post it to bugzilla. |
|
Back to top |
|
|
bonzai2024 n00b
Joined: 10 Nov 2005 Posts: 31
|
Posted: Sun Nov 20, 2005 5:10 pm Post subject: |
|
|
sorry but how to use this script ? |
|
Back to top |
|
|
enderandrew l33t
Joined: 25 Oct 2005 Posts: 731
|
Posted: Mon Nov 21, 2005 2:48 am Post subject: |
|
|
Save it as an ebuild and build it as a digest? _________________ Nihilism makes me smile. |
|
Back to top |
|
|
Hotblack n00b
Joined: 28 Dec 2004 Posts: 46
|
Posted: Mon Nov 21, 2005 10:08 am Post subject: |
|
|
TRauMa wrote: | The acx100 driver gentoo uses is historic anyway. Here is an ebuild that works with 2.6.14 |
Thank you. It worked also for me! |
|
Back to top |
|
|
opti007 n00b
Joined: 18 Nov 2005 Posts: 2
|
Posted: Mon Nov 21, 2005 1:31 pm Post subject: |
|
|
hmmm,
I'm totally new to this, can anyone explain me how this works
thnx |
|
Back to top |
|
|
TRauMa n00b
Joined: 26 Nov 2002 Posts: 43 Location: Germany
|
Posted: Mon Nov 21, 2005 5:09 pm Post subject: Submitted |
|
|
You guys (and gals) keep me going...
https://bugs.gentoo.org/show_bug.cgi?id=105738
Usage: See http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=3&chap=5#doc_chap2
Basically you do:
Code: |
cd /usr/local/portage
# EDIT: NOT cd /usr/local
mkdir -p net-wireless/acx100
cd net-wireless/acx100
wget http://bugs.gentoo.org/attachment.cgi?id=73314 -O acx100-0.3.18.ebuild
ebuild acx100-0.3.18.ebuild digest
|
and edit your /etc/make.conf acccording to the handbook link above. Then an emerge -av acx100 should show the new version.
If that sounds too complicated, just wait a bit until it is in the regular portage tree (check the bugzilla link above for progress (but pls don't spam the developers with "me too"-messages )).
Last edited by TRauMa on Thu Nov 24, 2005 6:27 pm; edited 1 time in total |
|
Back to top |
|
|
wschipper n00b
Joined: 21 Feb 2005 Posts: 4
|
Posted: Thu Nov 24, 2005 1:57 pm Post subject: compile acx100 fails |
|
|
If I follow Yor instructions I got the following error-message:
acx100# ebuild acx100-0.3.18.ebuild digest
!!! aux_get(): ebuild path for 'net-wireless/acx100-0.3.18' not specified:
!!! None
!!! aux_get(): ebuild path for 'net-wireless/acx100-0.3.18' not specified:
!!! None
doebuild(): aux_get() error reading net-wireless/acx100-0.3.18; aborting
Do You have any idea why???
Wolfgang |
|
Back to top |
|
|
TRauMa n00b
Joined: 26 Nov 2002 Posts: 43 Location: Germany
|
Posted: Thu Nov 24, 2005 6:40 pm Post subject: Re: compile acx100 fails |
|
|
wschipper wrote: | If I follow Yor instructions I got the following error-message:
Do You have any idea why???
Wolfgang |
Yeah, my bad, see above - caveat emptor and all, i type these things from memory .
One more thing, if you don't have /usr/local/portage yet, you have to create it (mkdir /usr/local/portage).
BTW, you should read the provided link to understand the repercussions of having a local portage tree. You shouldn't trust some random forum guy . |
|
Back to top |
|
|
n3xus2 n00b
Joined: 24 Nov 2005 Posts: 7
|
Posted: Sat Nov 26, 2005 11:25 pm Post subject: |
|
|
After doing install I try to modprobe acx_pci
but I get FATAL: Module acx_pci not found.
Any ideas? |
|
Back to top |
|
|
mcfirkin n00b
Joined: 30 Jan 2005 Posts: 1 Location: UK
|
Posted: Sun Nov 27, 2005 5:51 pm Post subject: |
|
|
Just got this far myself (much thanks to TRauMa ). Try acx instead of acx_pci (and yeah, I'm using pci - not pcmcia). |
|
Back to top |
|
|
csita n00b
Joined: 27 Nov 2005 Posts: 1
|
Posted: Sun Nov 27, 2005 5:54 pm Post subject: bing up acx_pci modul form universal installation CD |
|
|
Hi
Can somebody help me out how to I suppose to get or/and compile the acx_pci module if I have only the universal install CD and to have network connetion I need this kernel module but it is not in the CD or I did not find it. Where can I got it or how I can setup a bind enviromet to compile ? |
|
Back to top |
|
|
TRauMa n00b
Joined: 26 Nov 2002 Posts: 43 Location: Germany
|
Posted: Mon Nov 28, 2005 5:18 pm Post subject: Re: bing up acx_pci modul form universal installation CD |
|
|
csita wrote: | Hi
Can somebody help me out how to I suppose to get or/and compile the acx_pci module if I have only the universal install CD and to have network connetion I need this kernel module but it is not in the CD or I did not find it. Where can I got it or how I can setup a bind enviromet to compile ? |
You somehow have to get the ebuild and distfiles to the PC you try to install on, either via usb-stick or something else.
You'll need:
The ebuild file itself
The sources mentioned in the ebuild file (the driver, the firmware)
The sources go to /usr/portage/didstfiles/, then you should be able to follow the instructions above.
I don't know if kernel sources are on the install CD, if not, you'll need them, too.
BTW, I noticed that some ppl have problems with the firmware file names, if that is the case, rm /usr/portage/distfiles/fw.tar.bz2 and download fresh, the file changes contents on the server from time to time but not name. _________________ *sigfault* |
|
Back to top |
|
|
okayplayer n00b
Joined: 08 Dec 2005 Posts: 3
|
Posted: Sat Dec 10, 2005 11:28 pm Post subject: |
|
|
Iwconfig:
Code: | lan0 IEEE 802.11b+/g+ ESSID:"WeDontDieWeMultiply" Nickname:"acx v0.3.18"
|
uname :
Code: | forum acx100 # uname -a
Linux forum 2.6.14-gentoo-r4 #1 SMP PREEMPT Fri Dec 9 19:37:53 CET 2005 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux |
Seem to work fine.. But when I do
emerge --update world ... I has this error :
Code: |
Calculating dependencies ...done!
>>> emerge (1 of 1) net-wireless/acx100-0.2.0_pre8-r6 to /
>>> md5 files ;-) acx100-0.2.4.ebuild
>>> md5 files ;-) acx100-0.3.20.ebuild
>>> md5 files ;-) acx100-0.2.0_pre8-r6.ebuild
>>> md5 files ;-) files/digest-acx100-0.2.0_pre8-r6
>>> md5 files ;-) files/digest-acx100-0.2.4
>>> md5 files ;-) files/digest-acx100-0.3.20
>>> md5 src_uri ;-) acx100-0.2.0pre8_plus_fixes_57.tar.bz2
>>> md5 src_uri ;-) craig.tar.bz2
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
* 2.6.14-gentoo-r4
>>> Unpacking source...
>>> Unpacking acx100-0.2.0pre8_plus_fixes_57.tar.bz2 to /var/tmp/portage/acx100-0.2.0_pre8-r6/work
>>> Unpacking craig.tar.bz2 to /var/tmp/portage/acx100-0.2.0_pre8-r6/work
>>> Source unpacked.
Kernel version file: /usr/src/linux/include/linux/version.h
Kernel configuration file: /usr/src/linux/.config
Make damn sure these really match your currently running kernel!!
Kernel configuration found, performing sanity checks
All of the following items are required by the driver:
Loadable modules support is enabled.
Wireless LAN (non-hamradio) support is enabled.
Wireless extensions support is enabled.
The following is needed for PCMCIA/CardBus cards:
PCMCIA support is enabled.
CardBus support is enabled.
The following is needed for USB card support:
USB support is enabled.
The following is needed for PCI card support:
PCI support is enabled.
Kernel configuration satisfies the minimum requirements, continuing.
Wireless header file is WIRELESS_EXT version 19.
Configured with: /var/tmp/portage/gcc-3.3.5.20050130-r1/work/gcc-3.3.5/configure --enable-version-specific-runtime-libs --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/3.3.5-20050130 --includedir=/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.5-20050130/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/3.3.5-20050130 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/3.3.5-20050130/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/3.3.5-20050130/info --with-gxx-include-dir=/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.5-20050130/include/g++-v3 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --disable-libunwind-exceptions --disable-multilib --disable-libgcj --enable-languages=c,c++,f77 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu
gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)
Running linux 2.6.14-gentoo-r4
Compile info: will choose to use code infrastructure for NEWER wireless extension interface version (>= 13)
WARNING: Symmetric multiprocessing support (CONFIG_SMP) is enabled. If you
really have more than one cpu, be warned that this driver might still be not SMP safe.
*** Potential problems found above, waiting 5 seconds to let you know about it. ***
* Preparing acx_pci module
make: Entering directory `/usr/src/linux-2.6.14-gentoo-r4'
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/Makefile:3: ACX_DEBUG was not defined, assuming 1
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/Makefile:8: ACX_IO_WIDTH was not defined, assuming 16bit access
CC [M] /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100.o
CC [M] /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_conv.o
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx.h:7,
from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100.c:104:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:367:5: warning: "OLD_FIRMWARE_VERSIONS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:1530:5: warning: "MAYBE_BOGUS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100.c:285: warning: initialization from incompatible pointer type
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx.h:7,
from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_conv.c:66:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:367:5: warning: "OLD_FIRMWARE_VERSIONS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:1530:5: warning: "MAYBE_BOGUS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_conv.c:331:5: warning: "DEBUG_CONVERT" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_conv.c:604:5: warning: "DEBUG_CONVERT" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100.c:1559:5: warning: "ANNOYING_GETS_CALLED_TOO_OFTEN" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100.c:2152:5: warning: "REDUNDANT" is not defined
CC [M] /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.o
CC [M] /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.o
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx.h:7,
from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:87:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:367:5: warning: "OLD_FIRMWARE_VERSIONS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:1530:5: warning: "MAYBE_BOGUS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:91:5: warning: "BOGUS" is not defined
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx.h:7,
from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.c:82:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:367:5: warning: "OLD_FIRMWARE_VERSIONS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:1530:5: warning: "MAYBE_BOGUS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:671:5: warning: "NO_LONGER_NECESSARY_SINCE_FLUSHING_ABOVE_RIGHT" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:686:5: warning: "NO_LONGER_NECESSARY_SINCE_FLUSHING_ABOVE_RIGHT" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:1085:5: warning: "DISABLED_USER_SHALL_SYMLINK_IT_TO_TIACX111" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.c:717:6: warning: "POWER_SAVE_80211" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:1317:5: warning: "WE_DONT_NEED_THAT_DO_WE" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.c:1092:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.c:1178:5: warning: "IS_IT_BROKEN" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:1937:5: warning: "NOT_WORKING_YET" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:2041:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:2704:5: warning: "POWER_SAVE_80211" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:2883:5: warning: "DEBUG_WEP" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:2901:5: warning: "DEBUG_WEP" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.c:1835:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:3033:5: warning: "DEBUG_WEP" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.c:2251:5: warning: "THIS_IS_TROUBLESOME" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:3483:5: warning: "POWER_SAVE_80211" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper.c:3541:5: warning: "DEBUG_WEP" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_helper2.c:2382:6: warning: "POWER_SAVE_80211" is not defined
CC [M] /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_ioctl.o
CC [M] /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.o
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx.h:7,
from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_ioctl.c:65:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:367:5: warning: "OLD_FIRMWARE_VERSIONS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:1530:5: warning: "MAYBE_BOGUS" is not defined
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx.h:7,
from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:64:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:367:5: warning: "OLD_FIRMWARE_VERSIONS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:1530:5: warning: "MAYBE_BOGUS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:68:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:205:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:374:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:494:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:594:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:719:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:819:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:928:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:1065:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx80211frm.c:1171:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_ioctl.c:772:5: warning: "ENODATA_TO_BE_USED_AFTER_SCAN_ERROR_ONLY" is not defined
CC [M] /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/idma.o
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_ioctl.c:2742:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/setrate.c:85:5: warning: "UNUSED" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_ioctl.c:3209: error: unknown field `spy_offset' specified in initializer
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_ioctl.c:3209: warning: initialization makes pointer from integer without a cast
In file included from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx.h:7,
from /var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/idma.c:59:
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:367:5: warning: "OLD_FIRMWARE_VERSIONS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/include/acx_struct.h:1530:5: warning: "MAYBE_BOGUS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/idma.c:235:5: warning: "DEBUG_WEP" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/idma.c:276:5: warning: "TODO_FIGURE_OUT_WHEN_TO_SET_THIS" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/idma.c:294:5: warning: "TODO_FIGURE_OUT_WHEN_TO_SET_THIS" is not defined
make[1]: *** [/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/acx100_ioctl.o] Error 1
make[1]: *** Waiting for unfinished jobs....
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/idma.c:1162:5: warning: "FROM_SCAN_SOURCE_ONLY" is not defined
/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src/idma.c:1179:5: warning: "FROM_SCAN_SOURCE_ONLY" is not defined
make: *** [_module_/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src] Error 2
make: Leaving directory `/usr/src/linux-2.6.14-gentoo-r4'
!!! ERROR: net-wireless/acx100-0.2.0_pre8-r6 failed.
!!! Function linux-mod_src_compile, Line 505, Exitcode 2
!!! Unable to make -C /usr/src/linux SUBDIRS=/var/tmp/portage/acx100-0.2.0_pre8-r6/work/acx100-0.2.0pre8_plus_fixes_57/src WLAN_HOSTIF=WLAN_PCI modules.
!!! If you need support, post the topmost build error, NOT this status message.
|
|
|
Back to top |
|
|
TRauMa n00b
Joined: 26 Nov 2002 Posts: 43 Location: Germany
|
Posted: Tue Dec 13, 2005 1:48 am Post subject: |
|
|
okayplayer wrote: |
Seem to work fine.. But when I do
emerge --update world ... I has this error :
Code: |
Calculating dependencies ...done!
>>> emerge (1 of 1) net-wireless/acx100-0.2.0_pre8-r6 to /
>>> md5 files ;-) acx100-0.2.4.ebuild
>>> md5 files ;-) acx100-0.3.20.ebuild
>>> md5 files ;-) acx100-0.2.0_pre8-r6.ebuild
(snip)
|
|
Try 0.3.20, it's in the official portage tree now.
Code: | echo "~net-wireless/acx100-0.3.20" >> /etc/portage/package.keywords |
_________________ *sigfault* |
|
Back to top |
|
|
|