View previous topic :: View next topic |
Author |
Message |
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Sun Mar 30, 2003 8:14 pm Post subject: Problema con X... |
|
|
Allora, dopo aver configurato correttamente il mouse, X parte...
Il problema??
NON SENTE NE' IL MOUSE NE' LA TASTIERA!!!!
Mi spiego meglio...
Da console do gdm, parte il logger di gnome, io digito root ma il cursore nn scrive...
Se provo a cambiare console nn la cambia, se provo ad abilitare il num-lok nn si abilita, praticamente è come se la tastiera fosse staccata...
Il cursore del mouse nn si muove...
Lo stesso se invece di gnome faccio uno startx...
L'unico modo che ho per uscire da questa situazione è un hard-reboot...
Help plz... _________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
bsolar Bodhisattva
Joined: 12 Jan 2003 Posts: 2764
|
Posted: Sun Mar 30, 2003 8:17 pm Post subject: |
|
|
Puoi postare il tuo XF86Config? _________________ I may not agree with what you say, but I'll defend to the death your right to say it. |
|
Back to top |
|
|
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Sun Mar 30, 2003 9:08 pm Post subject: |
|
|
Code: | Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Spendo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLanguige" "it"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "Mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "philips"
HorizSync 31.5
VertRefresh 50-70
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
Section "Device"
Identifier "G400"
Driver "mga"
VideoRam 32768
EndSection
Section "Screen"
Identifier "Screen1"
Device "G400"
Monitor "philips"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePionter"
InputDevice "KeyBoard1" "CoreKeyboard"
EndSection
|
He... Nn Capisco... _________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
cerri Bodhisattva
Joined: 05 Mar 2003 Posts: 2957 Location: # init S
|
Posted: Sun Mar 30, 2003 9:10 pm Post subject: |
|
|
Non sono sicuro che xfree faccia diff tra maiuscole e minuscole. CMQ posta il file /var/log/XFree.0.log. _________________ Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
Back to top |
|
|
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Sun Mar 30, 2003 9:16 pm Post subject: |
|
|
L'ho trascritto da linux a win, xcui qualche maiuscola posso averla sbagliata, mi sa che nn è quello il problema... _________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
bsolar Bodhisattva
Joined: 12 Jan 2003 Posts: 2764
|
Posted: Sun Mar 30, 2003 9:25 pm Post subject: |
|
|
stefanonafets wrote: | L'ho trascritto da linux a win, xcui qualche maiuscola posso averla sbagliata, mi sa che nn è quello il problema... |
Cosa vuoi dire con "trascritto da linux a win"??
Mi stai facendo paura... _________________ I may not agree with what you say, but I'll defend to the death your right to say it. |
|
Back to top |
|
|
Dani Tsevech Apprentice
Joined: 23 Mar 2003 Posts: 284
|
Posted: Mon Mar 31, 2003 8:17 am Post subject: |
|
|
Penso voglia dire che ha scritto il log sulla partizione win... penso |
|
Back to top |
|
|
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Mon Mar 31, 2003 2:18 pm Post subject: |
|
|
No, vuol dire che ho acceso il portatile (con win, almeno per ora) e mi sono messo affianco la linuxbox, quindi ho trascritto il file (togliendo tutti i commenti) a manina...
Era l'unico modo... _________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
bsolar Bodhisattva
Joined: 12 Jan 2003 Posts: 2764
|
Posted: Mon Mar 31, 2003 3:32 pm Post subject: |
|
|
stefanonafets wrote: | No, vuol dire che ho acceso il portatile (con win, almeno per ora) e mi sono messo affianco la linuxbox, quindi ho trascritto il file (togliendo tutti i commenti) a manina...
Era l'unico modo... |
OMG!
È per questo che hai schivato la richiesta di cerri di postare il log di Xfree? _________________ I may not agree with what you say, but I'll defend to the death your right to say it. |
|
Back to top |
|
|
cerri Bodhisattva
Joined: 05 Mar 2003 Posts: 2957 Location: # init S
|
Posted: Mon Mar 31, 2003 7:20 pm Post subject: |
|
|
MAMMA MIA CHE GENTE
Vabbe', come si fa ad avere il log??? _________________ Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
Back to top |
|
|
bsolar Bodhisattva
Joined: 12 Jan 2003 Posts: 2764
|
Posted: Mon Mar 31, 2003 7:42 pm Post subject: |
|
|
cerri wrote: | MAMMA MIA CHE GENTE
Vabbe', come si fa ad avere il log??? |
Non hai sentito la procedura? Si aspetta... _________________ I may not agree with what you say, but I'll defend to the death your right to say it. |
|
Back to top |
|
|
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Tue Apr 01, 2003 1:26 pm Post subject: |
|
|
Cicc, il copia e incolla nn mi va ancora sotto la mia linuxbox, nè ho voglia di usare lynx... In più se il problema è di X, evidentemente nn posso usare un altro web browser, se avete consigli sono ben accetti, ma nn mi piacciono i commentini del tipo
Quote: | MAMMA MIA CHE GENTE |
...
Questo mi lascia piuttosto perplesso... _________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Tue Apr 01, 2003 1:43 pm Post subject: |
|
|
Eccoti il log, effettivamente un modo più veloce c'èra, nn ci avevo pensato...
Quote: |
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Mar 30 22:20:37 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "philips"
(**) | |-->Device "G400"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010040, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:06:0: chip 9005,001f card 9005,000f rev 00 class 01,00,00 hdr 00
(II) PCI: 00:09:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0b:0: chip 1103,0008 card 1103,0001 rev 07 class 01,04,00 hdr 80
(II) PCI: 00:0b:1: chip 1103,0008 card 1103,0001 rev 07 class 01,04,00 hdr 80
(II) PCI: 00:0c:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 00:0c:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 00:0c:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20 hdr 80
(II) PCI: 01:00:0: chip 102b,0525 card 102b,217d rev 04 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xe0800000 - 0xe1dfffff (0x1600000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe1f00000 - 0xe3ffffff (0x2100000) MX[B]
(II) Bus -1: bridge is at (0:4:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 4, Mem @ 0xe2000000/25, 0xe1000000/14, 0xe0800000/23, BIOS @ 0xe1ff0000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B]
[1] -1 0xdf800000 - 0xdf8000ff (0x100) MX[B]
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[3] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[4] -1 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[5] -1 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[6] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[7] -1 0x00007800 - 0x0000781f (0x20) IX[B]
[8] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[9] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[10] -1 0x00008800 - 0x00008803 (0x4) IX[B]
[11] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[12] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[13] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[14] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[15] -1 0x0000a400 - 0x0000a403 (0x4) IX[B]
[16] -1 0x0000a800 - 0x0000a807 (0x8) IX[B]
[17] -1 0x0000b000 - 0x0000b003 (0x4) IX[B]
[18] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[19] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[20] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[21] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B]
[1] -1 0xdf800000 - 0xdf8000ff (0x100) MX[B]
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[3] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[4] -1 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[5] -1 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[6] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[7] -1 0x00007800 - 0x0000781f (0x20) IX[B]
[8] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[9] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[10] -1 0x00008800 - 0x00008803 (0x4) IX[B]
[11] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[12] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[13] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[14] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[15] -1 0x0000a400 - 0x0000a403 (0x4) IX[B]
[16] -1 0x0000a800 - 0x0000a807 (0x8) IX[B]
[17] -1 0x0000b000 - 0x0000b003 (0x4) IX[B]
[18] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[19] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[20] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[21] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B]
[6] -1 0xdf800000 - 0xdf8000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[10] -1 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[11] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x00007800 - 0x0000781f (0x20) IX[B]
[15] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[16] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[17] -1 0x00008800 - 0x00008803 (0x4) IX[B]
[18] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[19] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[20] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[21] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[22] -1 0x0000a400 - 0x0000a403 (0x4) IX[B]
[23] -1 0x0000a800 - 0x0000a807 (0x8) IX[B]
[24] -1 0x0000b000 - 0x0000b003 (0x4) IX[B]
[25] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[26] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[27] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[28] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[29] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B]
[6] -1 0xdf800000 - 0xdf8000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[10] -1 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[11] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x00007800 - 0x0000781f (0x20) IX[B]
[15] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[16] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[17] -1 0x00008800 - 0x00008803 (0x4) IX[B]
[18] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[19] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[20] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[21] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[22] -1 0x0000a400 - 0x0000a403 (0x4) IX[B]
[23] -1 0x0000a800 - 0x0000a807 (0x8) IX[B]
[24] -1 0x0000b000 - 0x0000b003 (0x4) IX[B]
[25] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[26] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[27] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[28] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[29] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B]
[6] -1 0xdf800000 - 0xdf8000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[10] -1 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[11] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[12] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x00007800 - 0x0000781f (0x20) IX[B]
[18] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[19] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[20] -1 0x00008800 - 0x00008803 (0x4) IX[B]
[21] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[22] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[23] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[24] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[25] -1 0x0000a400 - 0x0000a403 (0x4) IX[B]
[26] -1 0x0000a800 - 0x0000a807 (0x8) IX[B]
[27] -1 0x0000b000 - 0x0000b003 (0x4) IX[B]
[28] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[29] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[30] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[31] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[32] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[33] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(--) MGA(0): Chipset: "mgag400"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xE2000000
(--) MGA(0): MMIO registers at 0xE1000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE0800000
(--) MGA(0): BIOS at 0xE1FF0000
(II) Truncating PCI BIOS Length to 32768
(--) MGA(0): Video BIOS info block at offset 0x07A80
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xe2000000,0x2000000)
(--) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(==) MGA(0): Write-combining range (0xe2000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): philips: Using hsync value of 31.50 kHz
(II) MGA(0): philips: Using vrefresh range of 50.00-70.00 Hz
(II) MGA(0): Clock range: 12.00 to 360.00 MHz
(II) MGA(0): Not using default mode "640x350" (hsync out of range)
(II) MGA(0): Not using default mode "320x175" (hsync out of range)
(II) MGA(0): Not using default mode "640x400" (hsync out of range)
(II) MGA(0): Not using default mode "320x200" (hsync out of range)
(II) MGA(0): Not using default mode "720x400" (hsync out of range)
(II) MGA(0): Not using default mode "360x200" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "320x240" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "320x240" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "320x240" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "400x300" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "400x300" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "400x300" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "400x300" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "400x300" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "832x624" (hsync out of range)
(II) MGA(0): Not using default mode "416x312" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1024" (hsync out of range)
(II) MGA(0): Not using default mode "800x512" (hsync out of range)
(II) MGA(0): Not using mode "800x600" (no mode of this name)
(II) MGA(0): Not using mode "1024x768" (no mode of this name)
(II) MGA(0): Not using mode "1280x1024" (no mode of this name)
(--) MGA(0): Virtual size is 640x480 (pitch 640)
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) MGA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(==) MGA(0): DPI set to (75, 75)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xe0800000 - 0xe0ffffff (0x800000) MX[B]
[1] 0 0xe1000000 - 0xe1003fff (0x4000) MX[B]
[2] 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B]
[3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0xdf000000 - 0xdf0000ff (0x100) MX[B]
[9] -1 0xdf800000 - 0xdf8000ff (0x100) MX[B]
[10] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[11] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[12] -1 0xe0800000 - 0xe0ffffff (0x800000) MX[B](B)
[13] -1 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
[14] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[15] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[16] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[17] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[18] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0x00007800 - 0x0000781f (0x20) IX[B]
[21] -1 0x00008000 - 0x0000801f (0x20) IX[B]
[22] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[23] -1 0x00008800 - 0x00008803 (0x4) IX[B]
[24] -1 0x00009000 - 0x00009007 (0x8) IX[B]
[25] -1 0x00009400 - 0x00009403 (0x4) IX[B]
[26] -1 0x00009800 - 0x00009807 (0x8) IX[B]
[27] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[28] -1 0x0000a400 - 0x0000a403 (0x4) IX[B]
[29] -1 0x0000a800 - 0x0000a807 (0x8) IX[B]
[30] -1 0x0000b000 - 0x0000b003 (0x4) IX[B]
[31] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[32] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[33] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[34] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[35] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[36] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MGA(0): Write-combining range (0xe2000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): Using 12627 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(==) MGA(0): Direct rendering disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
|
_________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
cerri Bodhisattva
Joined: 05 Mar 2003 Posts: 2957 Location: # init S
|
Posted: Tue Apr 01, 2003 2:17 pm Post subject: |
|
|
Boh. Sembra tutto corretto. L'unica cosa che proverei e' di rimuovere Driver "xfree86" da keboard, ma non mi viene in mente altro. _________________ Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
Back to top |
|
|
Dani Tsevech Apprentice
Joined: 23 Mar 2003 Posts: 284
|
Posted: Tue Apr 01, 2003 2:20 pm Post subject: |
|
|
Sicuro non sia colpa del WM e non di X? Pare corretto! |
|
Back to top |
|
|
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Thu Apr 03, 2003 3:55 pm Post subject: |
|
|
Se WM sta per WindowManager, ne sono abbastanza sicuro, perchè se do startx mi parte un'orrida interfaccia grafica che nn ha niente a che fare con gnome, e mi da gli stessi problemi...
Cmq, un modo per accertarmene?? _________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
cerri Bodhisattva
Joined: 05 Mar 2003 Posts: 2957 Location: # init S
|
Posted: Thu Apr 03, 2003 5:23 pm Post subject: |
|
|
si,
fai X &>logfile.
Guarda se hai mouse e tastiera (esci con ctrl+backspace, se puoi) e controlla il tuo file di log.
Questo serve per controllare l'impostazione base di X. _________________ Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito |
|
Back to top |
|
|
l0rdt n00b
Joined: 04 Apr 2003 Posts: 34 Location: Cosenza (ITALY)
|
Posted: Sun Apr 06, 2003 2:56 pm Post subject: |
|
|
E' strano che non funzioni il mouse, nonostante non sia passato nel tuo XF86Config qualcosa tipo
Non è che l'X freeza per qualche altro motivo?
Hai provato a sostituire
stefanonafets wrote: | Code: | Section "Screen"
Identifier "Screen1"
Device "G400"
Monitor "philips"
DefaultDepth 16 |
|
con
Code: | Section "Screen"
Identifier "Screen1"
Device "Standard VGA"
Monitor "philips"
DefaultDepth 8 |
(nota che una "Standard VGA" nel tuo XF86Config è già configurata)
e vedere se più o meno risolve qualcosa? |
|
Back to top |
|
|
stefanonafets l33t
Joined: 10 Feb 2003 Posts: 644
|
Posted: Sun Apr 13, 2003 9:16 pm Post subject: |
|
|
Oki, gli stessi identici problemi...
Siccome la linuxbox fa da router, riavvio dopo per provare a cambiare le impostazioni in XF86Config (visto che al momento sto utilizzando internet) come mi consigliava I0rdt...
Vi faccio sapere presto!! _________________ registered Linux user number #411324
sed 's/ke/che/g'
<The Deployment Slave is initializing> |
|
Back to top |
|
|
enx89 Apprentice
Joined: 21 Mar 2003 Posts: 192 Location: Milano
|
Posted: Sun Apr 13, 2003 9:53 pm Post subject: |
|
|
Con che programma hai configurato X? xf86config? Se è così prova a usare xf86cfg che fa un probe automatico dell' hw e vedi se funziona o si impianta. se funziona alva la condifurazione così com'è e fai partire X.
Buona fortuna |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|