thinair
Tux's lil' helper
Joined: 01 Nov 2002
Posts: 144
Location: Suisse
|
 Posted: Mon Mar 24, 2003 11:36 am Post subject: [K3b]On the fly cdcopy ? error : cannot set block size.. and |
 |
|
I am not able to make direct copy cd under k3b... (on the fly)
As you can see I scis-emulation for my two cd....
| Code: |
#cdrecord -scanbus
Cdrecord 1.11a33 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) 'PIONEER ' 'DVD-ROM DVD-115 ' '1.08' Removable CD-ROM (cd-reader)
0,1,0 1) 'PLEXTOR ' 'CD-R PX-W2410A' '1.04' Removable CD-ROM (cd-writer)
|
For my Plextor writer... I use generic-mmc driver and it work for iso/data/audio copy (plextor driver doesnt'work !)
Fo my Pionneer... I use Toschiba driver... the other doesn't work (or work similar to this driver)
The output of k3b :
| Code: |
Retriving information about source disk
Source disk seems to be a data CD
Start simulation copy at 24x speed..
ERROR: Cannot set block size
WARNING: Cannot determine mode of data track 1 - asuming MODE1.
ERROR: Cannot set block size
ERROR: Cannot set block size
WARNING: Cannot determine mode of data track 1 - asuming MODE1.
ERROR: Cannot set block size
WARNING: Cannot determine mode of data track 1 - asuming MODE1.
WARNING: Padding with 237206 zero sectors.
Turning BURN-Proof on
ERROR: Cannot set block size
Due to a bug in cdrdao the toc/cue file has been deleted. K3b was unable to restore it frome the backup.
Simulation successfully finished
Average overall write speed: 2696 kb/s (17.98x)
1 copies succsessfully created
|
The full output (for debug) :
| Code: |
cdrdao
-----------------------
Cdrdao version 1.1.7 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'andreas-0.5-UNIXWARE_Patch'
0,1,0: PLEXTOR CD-R PX-W2410A Rev: 1.04
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)
0,0,0: PIONEER DVD-ROM DVD-115 Rev: 1.08
Using driver: Taiyo-Yuden - Version 0.1(alpha) (options 0x0000)
Starting on-the-fly CD copy simulation at speed 24...
Track Mode Flags Start Length
------------------------------------------------------------
1 DATA 4 00:00:00( 0) 52:42:56(237206)
Leadout DATA 4 52:42:56(237206)
?: Input/output error. : scsi sendcmd: no error
CDB: 15 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 20s
ERROR: Cannot set block size.
WARNING: Cannot determine mode of data track 1 - asuming MODE1.
Analyzing track 01 (MODE1_RAW): start 00:00:00, length 52:42:56...
?: Input/output error. : scsi sendcmd: no error
CDB: 15 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 20s
ERROR: Cannot set block size.
?: Input/output error. : scsi sendcmd: no error
CDB: 15 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 20s
ERROR: Cannot set block size.
WARNING: Cannot determine mode of data track 1 - asuming MODE1.
?: Input/output error. : scsi sendcmd: no error
CDB: 15 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 20s
ERROR: Cannot set block size.
WARNING: Padding with 237206 zero sectors.
Turning BURN-Proof on
Writing track 01 (mode MODE1_RAW/MODE1_RAW )...
Wrote 1 of 532 MB (Buffer 100%).
Wrote 2 of 532 MB (Buffer 100%).
Wrote 3 of 532 MB (Buffer 100%).
Wrote 4 of 532 MB (Buffer 100%).
Wrote 5 of 532 MB (Buffer 100%).
Wrote 6 of 532 MB (Buffer 100%).
Wrote 7 of 532 MB (Buffer 100%).
|
[...] (same message for each MB)
| Code: |
Wrote 523 of 532 MB (Buffer 100%).
Wrote 524 of 532 MB (Buffer 100%).
Wrote 525 of 532 MB (Buffer 100%).
Wrote 526 of 532 MB (Buffer 100%).
?: Input/output error. : scsi sendcmd: no error
CDB: 15 00 00 00 0C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.009s timeout 20s
ERROR: Cannot set block size.
Wrote 527 of 532 MB (Buffer 100%).
Wrote 528 of 532 MB (Buffer 100%).
Wrote 529 of 532 MB (Buffer 100%).
Wrote 530 of 532 MB (Buffer 100%).
Wrote 531 of 532 MB (Buffer 100%).
Wrote 532 of 532 MB (Buffer 100%).
Wrote 237206 blocks. Buffer fill min 100%/max 100%.
Flushing cache...
Simulation finished successfully.
On-the-fly CD copying finished successfully.
|
The cd is not usable after....
Does anybody know a solution or an alternative... using BURN and proof and fast copies !
Thanx,
_________________
http://www.gentoofr.org
Le site francophone de GNU/Linux Gentoo |
|
Multimedia
