View previous topic :: View next topic |
Author |
Message |
Tonetheman n00b
Joined: 14 Jun 2002 Posts: 1
|
Posted: Fri Jun 14, 2002 6:18 pm Post subject: Problems with 1.2 networking |
|
|
I am not sure if this is even the forum to really post this in since it is kind of an install question.
I am having trouble getting 1.2 to install on a laptop (Thinkpad 390X). I have only made it as far as the networking ... so I am not really that far into the install.
I can do the command
# insmod pcmcia_core
And that works fine. But when I do the next command
# insmod i82365
This is what I get
Using /lib/modules/2.4.19-gentoo-r7/pcmcia/i82365.o
Intel ISA/PCI Cardbus PCIC probe:
PCI: Enabling device 00:03.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 01:00.0
Bridge register mapping failed: check cb_mem_base setting
no bridges found.
/lib/modules/2.4.19-gentoo-r7/pcmcia/i82365.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
Now I tried this same thing with 1.1a and I was able to get the network up and running...
Sorry if I am posting in the wrong forum. Any ideas of something to try? Like is there some parameters I can put on insmod maybe...
Thanks ahead of time,
Tony |
|
Back to top |
|
|
mtrunnell n00b
Joined: 14 Jun 2002 Posts: 7 Location: San Francisco, CA
|
Posted: Tue Jun 18, 2002 2:47 am Post subject: |
|
|
What kind of NIC do you have? I had the same problem with a Netgear FA410 in a Dell Inspiron 3500.
You might want to check out what I did at https://forums.gentoo.org/viewtopic.php?t=5137, near the bottom. |
|
Back to top |
|
|
|