Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Printer installatie
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Dutch
View previous topic :: View next topic  
Author Message
micder
n00b
n00b


Joined: 18 Feb 2003
Posts: 23
Location: Terneuzen-nl

PostPosted: Thu Mar 20, 2003 3:08 pm    Post subject: Printer installatie Reply with quote

Heb een probleem met installeren van printers: 1x parport en 1x usb.
Beiden werken onder Suse.
dmesg geeft:
Code:
parport0: PC-style at 0x278 [PCSPP(,...)]
...
lp0: using parport0 (polling).
....
uhci.c: USB UHCI at I/O 0xb000, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbscanner
scanner.c: 0.4.6:USB Scanner Driver
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
....
hub.c: USB new device connect on bus1/2, assigned device number 2
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x105C


"cat test > /dev/lp0" of "cat test > /dev/usb/lp0" heeft geen enkel resultaat.

Heb cups (+ghostscript) en foomatic geemerged.
Wil dezelfde drivers als onder Suse gebruiken.
Maar het commando:
Code:
foomatic-configure -s cups -p 63648 /dev/lp0 -n Brother -d ljet4
geeft
Code:
lpadmin: Unable to connect to server: Connection refused
Could not set up/change the queue "Brother"!

en het commando
Code:
lpstat -p -d
geeft
Code:
lpstat: Unable to connect to server: Connection refused


Heb in het Forum gezocht, maar m'n probleem niet gevonden.
Iemand enig idee? permissies?
Back to top
View user's profile Send private message
water
Guru
Guru


Joined: 19 Jun 2002
Posts: 387
Location: Zierikzee, The Netherlands

PostPosted: Fri Mar 21, 2003 7:56 am    Post subject: Reply with quote

Ik heb mij al heel lang niet meer in CUPS verdiept (printer is ook al heel lang kapot), maar je dient wel lid te zijn van oea groep, dacht ik.
_________________
Groeten uit Holland
Back to top
View user's profile Send private message
rdvrey
Tux's lil' helper
Tux's lil' helper


Joined: 03 Mar 2003
Posts: 92
Location: Netherlands, Amersfoort

PostPosted: Sat Mar 22, 2003 4:14 pm    Post subject: Reply with quote

Ik gebruk geen usb maar een netwerk printer, en ik heb simpelweg cupsd geemerged en de extra drivers. Daarna via kdecontrolcenter de printer aangemaakt. Dat laatste was voor mij genoeg om een werkende printer te krijgen. De kde site bevat een manual voor printers onder KDE. Het cups project is door KDE overgenomen en is nu een onderdeel van kde-print
via http://localhost:631 kan ik het hele process volgen cups is immers ook ipp

groeten

Robert
Back to top
View user's profile Send private message
micder
n00b
n00b


Joined: 18 Feb 2003
Posts: 23
Location: Terneuzen-nl

PostPosted: Sun Mar 23, 2003 3:25 pm    Post subject: Reply with quote

Probleem inmiddels opgelost.
Had IEEE niet in de kernel of als module.
Parport printer nu ook herkend.
Met cups de printers geinstalleerd.
Testprint vanaf localhost:631 lukte niet, maar printen vanuit enkele apllicaties zoals Mozilla en OpenOffice lukte wel.

groeten en bedankt,

Michael
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Dutch All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum