Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
usb (uhci module)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
blub
n00b
n00b


Joined: 13 Jun 2002
Posts: 37
Location: Belgium

PostPosted: Thu Jun 13, 2002 11:04 am    Post subject: usb (uhci module) Reply with quote

I'm trying to get my usb to work (almost for two days now )
I did work whit my previous distro (redhat ) but now I am using gentoo and i
can get it work !

/proc/bus/usb/devices is always empty

this is my kernel configuration
------------------------------------------
[*] Preliminary USB device filesystem
<M> UHCI (Intel PIIX4, VIA, ...) support
<M> USB Mass Storage support
-------------------------------------------

when i try the module I get

-------------------------------------------------------------------------------
pinguin /home/zuppaman # insmod usb-uhci
Using /lib/modules/2.4.19-gentoo-r7/kernel/drivers/usb/usb-uhci.o
/lib/modules/2.4.19-gentoo-r7/kernel/drivers/usb/usb-uhci.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
-------------------------------------------------------------------------------


When i look in at my interrupts i see that the usb devices is sharing his
irq.
Although I enabled "use irq for usb" in my bios ??

------------------------------------------------------------------------
pinguin /home/zuppaman # cat /proc/interrupts
CPU0
0: 532312 XT-PIC timer
1: 1866 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 2821 XT-PIC EMU10K1
10: 264 XT-PIC eth0
11: 4603 XT-PIC ide2, ide3, usb-uhci, usb-uhci
12: 4776 XT-PIC PS/2 Mouse
14: 4 XT-PIC ide0
15: 1 XT-PIC ide1
NMI: 0
ERR: 0
------------------------------------------------------------------------



Here's some kernel output

kernel output
--------------------------
pinguin /etc/modules.d # dmesg | grep usb

usb.c: registered new driver hub
usb.c: new USB bus registered, assigned bus number 1
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB device 2 (vend/prod 0x6bd/0x403) is not claimed by any active
driver.
usb.c: unable to get major 180 for usb devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 22:31:03 Jun 12 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
------------------------------
Back to top
View user's profile Send private message
lx
Veteran
Veteran


Joined: 28 May 2002
Posts: 1012
Location: Netherlands

PostPosted: Thu Jun 13, 2002 10:06 pm    Post subject: Reply with quote

Hi,

I don't use USB yet, but I have a keyboard with usb hub, and my /proc... is not empty so I will give you my settings, maybe it will help you.
Quote:
# USB support
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_UHCI=y
CONFIG_USB_HID=y
CONFIG_USB_SCANNER=m

Code:
Alex linux # cat /proc/interrupts
           CPU0       
  9:     139509          XT-PIC  acpi, usb-uhci, usb-uhci, EMU10K1
...



Code:
Alex linux # dmesg | grep usb
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:31:37 Jun 10 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid

_________________
"Remember there's a big difference between kneeling down and bending over.", Frank Zappa
Back to top
View user's profile Send private message
blub
n00b
n00b


Joined: 13 Jun 2002
Posts: 37
Location: Belgium

PostPosted: Thu Jun 13, 2002 11:12 pm    Post subject: Reply with quote

thx for the help but i already solved it
ik forgot to post here

it was VERY stupid of me
my default boot image in lilo was pointing to an other kernel :)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum