View previous topic :: View next topic |
Author |
Message |
ipower Tux's lil' helper
Joined: 07 Jan 2004 Posts: 120
|
Posted: Fri May 14, 2004 7:28 pm Post subject: [Howto] Kernel 2.6.x, Ipod and the firewire port. |
|
|
I suppose here that you have got a 2.6.X kernel and that your ipod is using the firewire port
1st step: compile your kernel
Choose the followings options for the device drivers
Device Drivers
SCSI device support --->
Cochez si ce n'est déja fait :
<*> SCSI device support
[*] legacy /proc/scsi/ support
-- SCSI support type (disk, tape, CD-ROM)
<*> SCSI disk support
Don't forget to take the SCSI disk support!
Next:
Device Drivers
IEEE 1394 (FireWire) support
<M> IEEE 1394 (FireWire) support
<M> OHCI-1394 support
<M> SBP-2 support (Harddisks etc.)
Compile your kernel......
2nd step: load your modules
Code: |
# modprobe ohci1394
|
Now , look at dmesg, you must have something like this:
Code: |
#dmesg | grep 94
Detected 1594.981 MHz processor.
ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e0002800-e0002fff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000008d58d]
|
Load sbp2
Liinux can detect your ipod:
you see:
Code: |
sda: test WP failed, assume Write Enabled
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
|
There are 2 partitions :
sda1 : 40 Mo with the firmware ;
sda2 : your data partitions and your Music.
3rd step: mount your ipod
Code: |
#mkdir /mnt/ipod
#mount -t vfat /dev/sda2 /mnt/ipod
|
4th step: Get a software for your ipod
I hope that this tutorial will help you.
Good luck
Nadir SOUALEM
nsoualem@yahoo.fr
math.linux.free.fr
Last edited by ipower on Tue Mar 29, 2005 10:03 am; edited 3 times in total |
|
Back to top |
|
|
ghoti Advocate
Joined: 30 Dec 2002 Posts: 3634 Location: Belgium
|
Posted: Fri May 14, 2004 7:41 pm Post subject: Re: [Howto] Kernel 2.6.x, Ipod and the firewire port. |
|
|
ipower wrote: | I hope that this tutorial will help you. |
C'est bien gentil, mais une question me tenaille : c'est quoi un ipod ? Une sorte de pote virtuel ?
Ouais, bon, c'est belgement lourd. -> [ ] |
|
Back to top |
|
|
ipower Tux's lil' helper
Joined: 07 Jan 2004 Posts: 120
|
Posted: Fri May 14, 2004 7:45 pm Post subject: |
|
|
it's an Mp3 player. Look at www.apple.com |
|
Back to top |
|
|
ghoti Advocate
Joined: 30 Dec 2002 Posts: 3634 Location: Belgium
|
Posted: Fri May 14, 2004 8:28 pm Post subject: |
|
|
Yesss, I know
I just tried to do remember, with my incredibly ridiculous belgian humour, that we are here on a french-speaking forum
Your post is very intresting but perhaps posted on the wrong place ?
[EDIT]Bon, à voir tes autres messages, tu connais parfaitement le français, ce qui m'étonne d'autant plus ...
Désolé si je parais un peu sectaire mais je crois que la langue française mérite qu'on la défende, même si la France s'en fout !
(Aïe, là je suis mort ...) |
|
Back to top |
|
|
Corto Apprentice
Joined: 29 Jan 2004 Posts: 222
|
Posted: Sat May 15, 2004 7:47 am Post subject: |
|
|
Quote: | Désolé si je parais un peu sectaire mais je crois que la langue française mérite qu'on la défende, même si la France s'en fout !
(Aïe, là je suis mort ...) |
Qu'on le pende en place publique !
@ipower : I've got a question for you ! When I unmount the ipod, it's still marked as "do not disconnect"... is that normal ? _________________ La vérité n´est pas du côté du plus grand nombre, parce qu´on ne veut pas qu´elle y soit. Le jour où le plus grand nombre sera à même, par sa culture et ses connaissances, de choisir lui-même sa vérité, il y a peu de chances pour qu´il se trompe. (B. V.) |
|
Back to top |
|
|
ipower Tux's lil' helper
Joined: 07 Jan 2004 Posts: 120
|
Posted: Sat May 15, 2004 11:09 am Post subject: |
|
|
After umount , try to "rmmod" the modules.
it's not very important if you see, don't disconnect, but don't forget to umount your device before you unplugg it, you can loose some datas...
Bonne chance et Vive la France pays de mon coeur!!!!!!
Ne me guillotinez pas svp , j'aime bien Danton et Robespierre, mais c'est pas une raison.
I'm lovi'n Gentoo! That's important!!!!!!!!!!! |
|
Back to top |
|
|
DooMi Tux's lil' helper
Joined: 03 May 2004 Posts: 103 Location: /dev/null
|
Posted: Mon Jul 12, 2004 2:37 pm Post subject: |
|
|
thanks for this nifty little howto. helped me out alot
just some addition:
all of you want to have a small kernel and so you just compiled the minimum into it, but make sure you got fat+vfat compiled as modules!
Code: | DOS/FAT/NT Filesystems
<M> DOS FAT fs support
<M> VFAT (Windows-95) fs support |
so you never get an vfat isnt supported by kernel error when trying to mount ya baby
peace _________________ cyrex ~ # ./vpenis
--- Weeee! Congrats! Your VPenis is actually 356.8 cm long --- |
|
Back to top |
|
|
Corto Apprentice
Joined: 29 Jan 2004 Posts: 222
|
Posted: Mon Jul 12, 2004 5:59 pm Post subject: |
|
|
ipower wrote: | After umount , try to "rmmod" the modules.
it's not very important if you see, don't disconnect, but don't forget to umount your device before you unplugg it, you can loose some datas... |
And so I see I forgot to answer you...
Anyway it works w/o "rmmod"-ing anything and gtkpod cleanly mount & unmount the ipod by itself so, you cares
ipower wrote: | Bonne chance et Vive la France pays de mon coeur!!!!!!
Ne me guillotinez pas svp , j'aime bien Danton et Robespierre, mais c'est pas une raison. |
N'en fait pas trop tout de même ! _________________ La vérité n´est pas du côté du plus grand nombre, parce qu´on ne veut pas qu´elle y soit. Le jour où le plus grand nombre sera à même, par sa culture et ses connaissances, de choisir lui-même sa vérité, il y a peu de chances pour qu´il se trompe. (B. V.) |
|
Back to top |
|
|
ross2411 n00b
Joined: 11 Feb 2004 Posts: 55 Location: Bedford, England
|
Posted: Sun Aug 01, 2004 11:24 pm Post subject: |
|
|
no offence to anybody french but could this thread be moved to an english forum because it's got lots of english in it and the how to is really useful (to us english guys )
Thanks
Ross |
|
Back to top |
|
|
DuF Advocate
Joined: 09 Dec 2002 Posts: 2687 Location: Paris
|
Posted: Sun Aug 01, 2004 11:39 pm Post subject: |
|
|
Euh elle est un peu stupide la situation là, des français qui se parlent entre eux en anglais sur le forum français ? Y a pas comme un problème dans l'énoncé ? |
|
Back to top |
|
|
ross2411 n00b
Joined: 11 Feb 2004 Posts: 55 Location: Bedford, England
|
Posted: Mon Aug 02, 2004 12:09 am Post subject: |
|
|
I only did French GCSE and got a C in that so not too good on the old French but i think you said something about it being a bit stupid because people are speaking English in a French forum.
Still, it was only a comment really, not a request.
Sorry if I offended anyone
Au revoir
Ross |
|
Back to top |
|
|
kernelsensei Bodhisattva
Joined: 22 Feb 2004 Posts: 5619 Location: Woustviller/Moselle/FRANCE (49.07°N;7.02°E)
|
Posted: Mon Aug 02, 2004 4:26 am Post subject: |
|
|
C'est vrai que si un moderateur passe dans le coin, ca serait une bonne idée de déplacer ce thread sur le forum anglophone, quite de recopier/retranscrire ce dernier sur le forum français par la suite !
C'est juste une idée comme ça ... _________________ $ ruby -e'puts " .:@BFegiklnorst".unpack("x4ax7aaX6ax5aX15ax4aax6aaX7ax2aX5aX8 \
axaX3ax8aX4ax6aX3aX6ax3ax3aX9ax4ax2aX9axaX6ax3aX2ax4ax3aX4aXaX12ax10aaX7a").join' |
|
Back to top |
|
|
zdra Veteran
Joined: 30 Nov 2003 Posts: 1693 Location: Bruxelles, Belgique
|
|
Back to top |
|
|
DuF Advocate
Joined: 09 Dec 2002 Posts: 2687 Location: Paris
|
Posted: Mon Aug 02, 2004 9:59 am Post subject: |
|
|
ross2411 wrote: | I only did French GCSE and got a C in that so not too good on the old French but i think you said something about it being a bit stupid because people are speaking English in a French forum.
Still, it was only a comment really, not a request.
Sorry if I offended anyone
Au revoir
Ross |
I'm sorry too, I didn't would offend you, I was just focusing on the situation where french people are speaking between us in english in a french forum... i've no problem with you and the fact you speak english here as you are not able to speak french.
I think that the best way is too duplicate this thread in the suitable forum.
Je ne traduis pas en français, je pense que mon anglais bas niveau se comprend facilement |
|
Back to top |
|
|
ross2411 n00b
Joined: 11 Feb 2004 Posts: 55 Location: Bedford, England
|
Posted: Mon Aug 02, 2004 10:52 am Post subject: |
|
|
Yea, that's all I was really saying. Duplicate rather then move, cp rather then mv
See ya
Ross |
|
Back to top |
|
|
skot n00b
Joined: 07 Mar 2004 Posts: 22
|
Posted: Sun Mar 27, 2005 5:09 pm Post subject: |
|
|
Thank you very much for your tutorial, that was exactly what I needed!!! many thanks
scott |
|
Back to top |
|
|
|