| View previous topic :: View next topic |
| Author |
Message |
retroman
Apprentice
Joined: 18 Nov 2004
Posts: 207
Location: Stuttgart
|
 Posted: Sat Mar 19, 2005 9:40 am Post subject: error is back, do you know what it is |
 |
|
This error causes to the box to start beeping does anyone know what this means
scsi0: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 01 04 d8 40 00 00 18 00
Info fld=0x104d84d, Current sda: sense key Medium Error
Additional sense: Unrecovered read error
end_request: I/O error, dev sda, sector 17094720
scsi0: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 01 04 d8 40 00 00 10 00
Info fld=0x104d84d, Current sda: sense key Medium Error
Additional sense: Unrecovered read error
end_request: I/O error, dev sda, sector 17094720 |
|
| Back to top |
|
 |
Weeve
Retired Dev
Joined: 30 Oct 2002
Posts: 641
|
| Posted: Sun Mar 20, 2005 6:10 pm Post subject: |
|
|
| Assuming there are no problems with your SCSI controller, I'd say it looks like your hard drive is dying. If your drive supports SMART, you might try using the tools from the sys-apps/smartmontools package to see if SMART confirms problems on the drive. |
|
| Back to top |
|
|
retroman
Apprentice
Joined: 18 Nov 2004
Posts: 207
Location: Stuttgart
|
| Posted: Sun Mar 20, 2005 8:43 pm Post subject: smart support? |
|
|
How would i know if it supports smart?
jordan |
|
| Back to top |
|
|
leonarp
n00b
Joined: 22 Mar 2004
Posts: 35
Location: Kansas
|
| Posted: Thu Mar 24, 2005 2:31 pm Post subject: |
|
|
| If it is a reasonably modern drive it probably does. I have a D1000 array with c.1999 drives and they are all SMART capable. emerge smartmontools, configure it, and start it up. It will tell you if they are SMART capable or not. |
|
| Back to top |
|
|
Weeve
Retired Dev
Joined: 30 Oct 2002
Posts: 641
|
| Posted: Thu Mar 24, 2005 4:35 pm Post subject: |
|
|
| There is also a nice article from Linux Journal about smartmontools and setting it up for your system. |
|
| Back to top |
|
|
|
Gentoo on Sparc
