View previous topic :: View next topic |
Author |
Message |
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Thu Dec 30, 2004 2:06 pm Post subject: [HOW-TO] Aceleracion grafica con Intel 855GM + XORG |
|
|
ACELERACION GRAFICA CON INTEL 855GM
Buenas, este es mi primer topic en este fantastico foro y he querido empezar añadiendo una pequeña informacion que os ayudara a todos aquellos que tengan una targeta intel 855GM (y compatibles) y quieran usar la aceleracion grafica con Xorg, espero que os sirva de algo.
*Para los que no tengan aun soporte de la targeta Intel 855GM en el kernel:
Debereis activar estas opciones del kernel antes de poder modificar los parametros de Xorg:
En Device Drivers -> Character devices :
Code: | <*> /dev/agpgart (AGP Support) |
/*Para activar el soporte AGP*/
Code: | <*> Intel 440LX/BX/GX, I8xx and E7x05 chipset support |
/* Esta opcion la usaremos para dar soporte DRI y GLX a nuestro chipset Intel y poder usar la aceleracion*/.
Code: | [*] Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) |
/* Para activar la Direct Rendering Infraestructure(si quereis mas informacion de su funcionamiento ->http://dri.sourceforge.net */
/* Para cargar el driver i810 */
Code: | <*> Intel 830M, 845G, 852GM, 855GM, 865G (i915 driver) ---> |
/*Para dar soporte a nuestra targeta grafica */
Ahora debemos compilar el kernel y reiniciar el sistema.
*Para los que ya tengan configurado el kernel:
1) Primero de todo iremos en modo root al archivo /etc/X11/xorg.conf para poder modificar los paranetros de configuración del Xorg
*NOTA: Recomiendo que hagais una copia del archivo por si teneis luego algun problema que espero que no sea asi pero mas vale prevenir.
(Si por algun motivo no teneis el archivo xorg.conf no os preucupeis, haced un xorgconfig y configurar las X para los dispositivos que poseis(el raton, teclado, pantalla,etc.) acordaros de poner el driver Intel i810 y guardarlo como xorg.conf, el script de configuracion ya lo guarda por defecto en ese archivo.)
2) Abriremos el archivo con nuestro editor favorito y buscaremos esta seccion y añadiremos estos parametros, puede que algunos ya los tengais, comoe s obvio añadir solo los que os falten.Esta al principio del archivo.
--------------------------------------------------
Code: | Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
Load "glx"
Load "dri"
Load "GLcore"
Load "bitmap"
Load "ddc"
Load "int10"
Load "record"
Load "vbe"
EndSection |
---------------------------------------------------
*NOTA: Si teneis alguno de estos comentados (es decir con el #, pues descomentarlo para activarlo, ya se que parece obvio pero siempre habra algun despistado que no lo quitara.)
3) Ahora toca ir a la seccion *Graphics device section*
Code: | # Device configured by xorgconfig:
Section "Device"
Identifier "intel" /*Esto no lo modifiqueis, el xorgconfig ya lo configura, si lo canvias debereis canviar el nombre identificativo que hay en la parte de las resoluciones de pantalla tambien, asi que mejor no lo toqueis*/
Driver "i810"
VideoRam 65536 -> Esto es aleatorio, como imaginareis aqui teneis que especificar la Ram de vuestra targeta, vosotros sabreis de cuanto es la vuestra...8)
EndSection |
4) Finalmente en *ServerLayout sections* (que esta al final del archivo)
Code: | Section "DRI"
Mode 0666
EndSection
|
*****************************************************************************************
Ahora guardar el archivo y cargar las X con vuestro gestor favorito.
Bueno aqui acaba el tutorial para configurar la targeta grafica Intel 855GM ( y comp.) y la aceleracion grafica, espero que os haya servido para algo(a mi por lo menos si) .
Si teneis alguna duda, problema o alguna aportacion ,siempre sera bien recibida por mi parte.
He dicho.
*****************************************************************************************
Proximamente ampliacion del HOW-TO:
-> Configurar el FrameBuffer _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org
Last edited by GipfeX on Sat Jan 08, 2005 11:48 pm; edited 8 times in total |
|
Back to top |
|
|
2xMcK n00b
Joined: 13 Jul 2004 Posts: 19
|
Posted: Fri Dec 31, 2004 5:48 pm Post subject: |
|
|
Graciasss! Lo probaré y ya comento. Tengo ganas de que se pueda usar la tv out de esta tarjeta desde linux para poner las pelis jejeje _________________ -Porting linux to Dell Axim x3i handheld. More info.
-Dell Inspiron 510m. Pentium-M (Dothan) 1.7Ghz, 1Gb Ram, 60Gb hd, dvd+r 4x, 15" sxga+. |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Fri Dec 31, 2004 6:26 pm Post subject: |
|
|
2xMcK wrote: | Tengo ganas de que se pueda usar la tv out de esta tarjeta desde linux para poner las pelis jejeje |
Y yo!!! ademas del framebuffer claro . |
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Fri Dec 31, 2004 7:51 pm Post subject: |
|
|
psm1984 no tienes framebuffer en tu gentoo?
Si es asi dimelo que te digo como configurarlo. [/quote] _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org |
|
Back to top |
|
|
cnyx l33t
Joined: 17 Jul 2003 Posts: 883 Location: Valencia
|
Posted: Sat Jan 01, 2005 1:17 pm Post subject: |
|
|
Yo tampoco he conseguido lo del framebuffer con esa tarjeta. Pero bueno al final me he conformado con las fuentes a 640x480 y desactivar de la bios la opcion esa de expandir para que ocupe toda la pantalla. Asi por lo menos no tengo esas fuentes tan horribles sino que las tengo bonitas y pequeñitas, lo unico es que solo ocupa 640x480px de la pantalla... pero bueno.
Por supuesto de bootsplash ya ni hablamos...
saludos. |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Sat Jan 01, 2005 3:36 pm Post subject: |
|
|
con el vesa-tng incluso logro que arranque y no tire un kernel panic, a 640x480 tambien, he logrado que salga el pinguino y todo, pero cuando cargo las x... adios fb. |
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Sat Jan 01, 2005 4:25 pm Post subject: |
|
|
Ok, pues a ver si luego tengo tiempo y hago una ampliacion del how-to donde aparezca como configurar el framebuffer en la Intel 855GM , ya que a mi me va muy bien,...tengo framebuffer a 1024x768
Salu2. _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org |
|
Back to top |
|
|
kcobain Apprentice
Joined: 24 Oct 2003 Posts: 221
|
Posted: Sat Jan 01, 2005 5:28 pm Post subject: |
|
|
Yo tambien tengo puesto el framebuffer con esta tarjeta sin problemas, creo q seguí el howto en ingles para configurarlo, pero vamos que todo como la seda a 1024x768....
2xMcK mira tu correo...
Enga, saludos. |
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Sun Jan 02, 2005 1:38 pm Post subject: |
|
|
Como Configurar el Frame Buffer
Bueno ya estoy de vuelta y como prometi aqui teneis el mini how-to para el poder tener un frame buffer a 1024x768 con vuestra Intel.
Para empezar haremos unas pequeñas modificaciones en el kernel.
1) En Device Drivers -> Graphics Support :
Code: | [*] Support for frame buffer devices
<*> VESA VGA graphics support
VESA driver type (vesafb) ---> |
2) En Device Drivers -> Graphics Support ->Console display driver support -->
Code: | [*] Video mode selection support
<*> Framebuffer Console support |
Extra:
Code: | [*] Support for the framebuffer splash -> Si quereis el boot-splash en Graphics Support teneis esta opcion disponible. |
Bueno pues aqui acaba la parte del kernel, ahora ya sabeis a recompilar, no me seais vagos
-------------------------------------------------------------------------------------------------------
Muy bien pues una vez compilado el kernel nos dirigimos al archivo de configuracion de grub, es decir en /boot/grub/grub.conf
Debemos añadir ahora esta linea, para que inicie el framebuffer en modo 1024x768.
Debe de ir como parametro del kernel en el grub.conf es decir que debe de quedar una cosa asi:
Code: | kernel /imagen_kernel root=/dev/partcion_imagen vga=791 |
Bueno ahora reiniciais ya deberias tener FRAME-BUFFER!!! XD .. si teneis cualquier duda o problema ya sabeis donde acudir...
Por cierto una vez probado decidme si esta bien o si quisierais que hubiera algo mas en el how-to para dejarlo ya fijo con el anterior..
Suerte y Salu2. _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Sun Jan 02, 2005 3:01 pm Post subject: |
|
|
Pues sigue igual , cuando arranca me dice que presione enter para meter un modo de video valido o espacio para que sea por defecto (o parecido ).
cat /proc/cmdline
root=/dev/hda6 vga=791
dmesg | grep fb
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
vesafb: probe of vesafb0 failed with error -6
cat /usr/src/linux/.config | grep FB
CONFIG_FB=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=m
CONFIG_FB_VESA_STD=y
# CONFIG_FB_VESA_TNG is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_SPLASH is not set
title Gentoo 2.6.10
root (hd0,2)
kernel /vmlinuz root=/dev/hda6 vga=791 |
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Sun Jan 02, 2005 4:22 pm Post subject: |
|
|
Segun lo que has puesto, te puedo decir que tienes activado el framebuffer, pero creo que el problema esta en que has puesto el driver vesafb en modulo, y yo no he dicho q se tuviera que poner como modulo si no que tienes que ponerlo integrado en el kernel
-> Aqui esta el problema, tiene que salirte como "y"
Es decir que debes corregir lo del kernel asegurate que no esta como modulo nada...
A mi me sale esto:
Code: | cat /usr/src/linux/.config | grep FB
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VESA_STD=y
# CONFIG_FB_VESA_TNG is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_SPLASH=y
|
Suerte y salu2.
[/code] _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Sun Jan 02, 2005 5:48 pm Post subject: |
|
|
Sigue igual
dmesg | grep fb
vesafb: probe of vesafb0 failed with error -6
cat /proc/cmdline
root=/dev/hda6 vga=0x317
cat /usr/src/linux/.config | grep FB
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_VESA_STD=y
# CONFIG_FB_VESA_TNG is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_SPLASH=y
¿Sera la Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) o la pantalla de 1400x1050? |
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Sun Jan 02, 2005 6:01 pm Post subject: |
|
|
Que raro rarouuu rarouu....
ummm yo el frame buffer lo he configurado de este modo con la Intel 855GM y con un nvidia fx 5200 y en las dos van igual de bien y los monitores son diferentes osea que me pillas descolocado totalmente....
Ahora lo tienes bien configurado....no entiendo porque no te va...
a mi me sale esto:
Code: | dmesg | grep fb
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
vesafb: framebuffer at 0xd8000000, mapped to 0xdf980000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
|
Pusistes lo de <*>video mode selection support no?
umm ya mirare, a ver si alguien que mire esto, se lo ocurre que es...investigaremos! Aunque pondria la mano en el fuego a que eso no es de configuracion del frame buffer....
Paciencia y Salu2. _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org
Last edited by GipfeX on Sun Jan 02, 2005 6:21 pm; edited 1 time in total |
|
Back to top |
|
|
navegante l33t
Joined: 21 Jul 2004 Posts: 702
|
Posted: Sun Jan 02, 2005 6:07 pm Post subject: |
|
|
Tambien podría ser problema de version del kernel que versión tiene cada uno, igual la version de vesafb y vesafb-tng son diferentes en los dos, lo mismo para sus splashutils, solo resta decir que busque por el foro y google y al parecer a algunos les sirve y a otros no (la mayoria). Bueno eso digan sus versiones. Saludos. _________________ "El hombre es libre desde que nace, aún para decidir no ser libre"
KDE registered user: #2655 | Linux registered user: #404918 |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Sun Jan 02, 2005 6:19 pm Post subject: |
|
|
El Console display driver support lo tengo asi:
--- VGA text console
[*] Video mode selection support
<*> Framebuffer Console support
[ ] Select compiled-in fonts
Es un gento-dev-sources-2.6.10-r1, pero con la serie 2.6.9 tampoco funciona. Con distintos live-cd's tampoco va (incluidos los cd's de intalacion de gentoo).
Last edited by psm1984 on Sun Jan 02, 2005 7:06 pm; edited 1 time in total |
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Sun Jan 02, 2005 6:33 pm Post subject: |
|
|
yo tengo la 2.6.9, y el kernel lo tengo asi :
--- VGA text console
[*] Video mode selection support
< > MDA text console (dual-headed) (EXPERIMENTAL)
<*> Framebuffer Console support
[ ] Select compiled-in fonts
acuerdate de poner el video mode selection support
Salu2. _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org |
|
Back to top |
|
|
navegante l33t
Joined: 21 Jul 2004 Posts: 702
|
Posted: Sun Jan 02, 2005 6:41 pm Post subject: |
|
|
Lo mismo que GipfeX activaste el Video mode selection support, si no lo tienes no puedes usar el parametro vga=xxx, por otro lado si no deseas activarlo prueba a especificarlo en tu bios. saludos. _________________ "El hombre es libre desde que nace, aún para decidir no ser libre"
KDE registered user: #2655 | Linux registered user: #404918 |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Sun Jan 02, 2005 7:07 pm Post subject: |
|
|
Si lo tengo se me paso copiarlo antes. ¿a vosotros os funciona el fb de los live-cd's?
Por cierto, en Character devices no hace falta soporte para Intel I810 ¿no? solo tengo i915 y funciona. |
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Sun Jan 02, 2005 7:40 pm Post subject: |
|
|
Ponlo, no nos seas vago que no cuesta nada ponerlo integrado en el kernel, yo lo tengo puesto.
:lol:Tienes que seguir a rajatabla lo que he puesto en el how-to, si no luego no sabremos si es culpa de eso o de otra cosa.... venga saludos. _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Sun Jan 02, 2005 8:09 pm Post subject: |
|
|
sin novedad . |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Sun Jan 02, 2005 11:37 pm Post subject: |
|
|
Guarreando he conseguido almenos activar el S-Video, aunque no se como hacer para tener las dos pantallas en marcha . Si cambio el LFP,TV por TV,LFP no funciona la salida...
Code: |
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
Load "glx"
Load "dri"
Load "GLcore"
Load "bitmap"
Load "ddc"
Load "int10"
Load "record"
Load "vbe"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontVTSwitch"
# Option "DontZap"
# Option "Dont Zoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/psaux"
# Option "Resolution" "256"
# Option "Protocol" "Xqueue"
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "microsoft"
Option "Device" "/dev/ttyS0"
# Option "SendCoreEvents"
EndSection
Section "Monitor"
Identifier "tft"
Option "DPMS" "true"
Modeline "1400x1050" 129.44 1400 1432 1920 1952 1050 1071 1081 1103
EndSection
Section "Device"
Option "DRI" "True"
Identifier "extreme"
Driver "i810"
VendorName "Intel Corp."
BoardName "852GM/852GME/855GM/855GME Chipset Graphics Controller"
BusID "PCI:0:2:0"
VideoRam 65536
Option "EnablePageFlip" "True"
Option "MonitorLayout" "LFP,TV"
Option "CheckLid" "False"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "extreme"
Monitor "tft"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
# InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
|
|
|
Back to top |
|
|
GipfeX n00b
Joined: 30 Dec 2004 Posts: 65
|
Posted: Mon Jan 03, 2005 12:11 am Post subject: |
|
|
Ummm, la verdad es que creo que el problema que debes tener es que la targeta grafica que tienes, y en este caso tenemos, no soporta una resolucion mayor de 1024x768 o por lo menos no la que tu quieres....es la unica salida que le veo al problema.
Salu2. _________________ I only know, that don't know nothing.
--------------------------------------------
JabberID: gipfex@jabber.org |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Mon Jan 03, 2005 2:06 am Post subject: |
|
|
Pues ya funciona el vesafb, eso si, no soporta mas de 640x480 a 16 (no he probado otros modos):
vesafb: framebuffer at 0xf0000000, mapped to 0xe0980000, using 832k, total 832kvesafb: mode is 640x480x16, linelength=1280, pages=0
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device |
|
Back to top |
|
|
navegante l33t
Joined: 21 Jul 2004 Posts: 702
|
Posted: Mon Jan 03, 2005 2:23 am Post subject: |
|
|
Pues a mi me sorprende que solo soporte a 640, ya que eso es vga, de vesa nada, y como dicen algunos que si les soporta a mas de 640, porque en lugar de ponerle vga=xxx le pones vga=ask, checas la lista y ves si te jala con otro. Saludos. _________________ "El hombre es libre desde que nace, aún para decidir no ser libre"
KDE registered user: #2655 | Linux registered user: #404918 |
|
Back to top |
|
|
psm1984 l33t
Joined: 14 Oct 2003 Posts: 919
|
Posted: Mon Jan 03, 2005 7:55 pm Post subject: |
|
|
A 1024 tambien arranca, pero con 8 bits de color... ¿modos no soportados en bios o falta de memoria de la tarjeta grafica? |
|
Back to top |
|
|
|