Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[TIP] visualizzare al meglio i file di conf
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) Risorse italiane (documentazione e tools)
View previous topic :: View next topic  
Author Message
Tiro
l33t
l33t


Joined: 14 Feb 2003
Posts: 752
Location: italy

PostPosted: Fri Dec 10, 2004 4:29 pm    Post subject: [TIP] visualizzare al meglio i file di conf Reply with quote

spero che questo tip non sia già stato scritto ... e che sia di vostro gradimento... ;)

per chi non ama scorrere i file di configurazione lunghi a causa dei commenti e righe vuote oppure per chi vuole postare sul forum i file di configurazioni in maniera compatta io consiglio: "sguscia" ! :)

Code:

# nano /bin/sguscia

sed -e '/^$/d' -e '/^#/d' $*

# chmod 777 /bin/sguscia


i risultati sono da così:

Code:
# cat /etc/make.conf

# Copyright 2000-2003 Daniel Robbins, Gentoo Technologies, Inc.
# Contains local system settings for Portage system
# $Header: /home/cvsroot/gentoo-src/portage/cnf/make.conf,v 1.70 2004/01/12 07:34:38 carpaski Exp $

# Please review 'man make.conf' for more information.

# Build-time functionality
# ========================
#
# The USE variable is used to enable optional build-time functionality. For
# example, quite a few packages have optional X, gtk or GNOME functionality
# that can only be enabled or disabled at compile-time. Gentoo Linux has a
# very extensive set of USE variables described in our USE variable HOWTO at
# http://www.gentoo.org/doc/use-howto.html
#
# The available list of use flags with descriptions is in your portage tree.
# Use 'less' to view them:  --> less /usr/portage/profiles/use.desc <--
#
# 'ufed' is an ncurses/dialog interface available in portage to make handling
# useflags for you. 'emerge app-admin/ufed'
#
# Example:

LANG='39'
USE="X alsa fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowex mmx2 g77 samba arts kde -unicode 3dnow dvd xvid divx4linux kahakai real live"

# Host Setting
# ============
#
# If you are using a Pentium Pro or greater processor, leave this line as-is;
# otherwise, change to i586, i486 or i386 as appropriate. All modern systems
# (even Athlons) should use "i686-pc-linux-gnu". All K6's are i586.
#
COMPILER="diet"
CHOST="i686-pc-linux-gnu"

# Host and optimization settings
# ==============================
#
# For optimal performance, enable a CFLAGS setting appropriate for your CPU.
#
# Please note that if you experience strange issues with a package, it may be
# due to gcc's optimizations interacting in a strange way. Please test the
# package (and in some cases the libraries it uses) at default optimizations
# before reporting errors to developers.
#
# -mcpu=<cpu-type> means optimize code for the particular type of CPU without
# breaking compatibility with other CPUs.
#
# -march=<cpu-type> means to take full advantage of the ABI and instructions
# for the particular CPU; this will break compatibility with older CPUs (for
# example, -march=athlon-xp code will not run on a regular Athlon, and
# -march=i686 code will not run on a Pentium Classic.
#
# CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp,
# athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686
# (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron),
# pentium3, and pentium4.
#
# Note that Gentoo Linux 1.4 and higher include at least gcc-3.2.
#
# CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686
# (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95*
#
# CRITICAL WARNINGS: ****************************************************** #
# K6 markings are deceptive. Avoid setting -march for them. See Bug #24379. #
# ************************************************************************* #
#
# Decent examples:
#
CFLAGS="-mcpu=athlon-xp -O3 -pipe -fomit-frame-pointer"
#CFLAGS="-march=pentium3 -O3 -pipe"

# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings.
CXXFLAGS="${CFLAGS}"

# Advanced Masking
# ================
#
# Gentoo is using a new masking system to allow for easier stability testing
# on packages. KEYWORDS are used in ebuilds to mask and unmask packages based
# on the platform they are set for. A special form has been added that
# indicates packages and revisions that are expected to work, but have not yet
# been approved for the stable set. '~arch' is a superset of 'arch' which
# includes the unstable, in testing, packages. Users of the 'x86' architecture
# would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages.
# '~ppc', '~sparc' are the unstable KEYWORDS for their respective platforms.
#
# Please note that this is not for development, alpha, beta, nor cvs release
# packages. "Broken" packages will not be added to testing and should not be
# requested to be added. Alternative routes are available to developers
# for experimental packages, and it is at their discretion to use them.
#
# DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST.
# IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS.
#
#ACCEPT_KEYWORDS="~x86"

# Portage Directories
# ===================
#
# Each of these settings controls an aspect of portage's storage and file
# system usage. If you change any of these, be sure it is available when
# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
#
# PORTAGE_TMPDIR is the location portage will use for compilations and
#     temporary storage of data. This can get VERY large depending upon
#     the application being installed.
#PORTAGE_TMPDIR=/var/tmp
#
# PORTDIR is the location of the portage tree. This is the repository
#     for all profile information as well as all ebuilds. This directory
#     itself can reach 200M. WE DO NOT RECOMMEND that you change this.
#PORTDIR=/usr/portage
#
# DISTDIR is where all of the source code tarballs will be placed for
#     emerges. The source code is maintained here unless you delete
#     it. The entire repository of tarballs for gentoo is 9G. This is
#     considerably more than any user will ever download. 2-3G is
#     a large DISTDIR.
#DISTDIR=${PORTDIR}/distfiles
#
# PKGDIR is the location of binary packages that you can have created
#     with '--buildpkg' or '-b' while emerging a package. This can get
#     upto several hundred megs, or even a few gigs.
#PKGDIR=${PORTDIR}/packages
#
# PORT_LOGDIR is the location where portage will store all the logs it
#     creates from each individual merge. They are stored as YYMMDD-$PF.log
#     in the directory specified. This is disabled until you enable it by
#     providing a directory. Permissions will be modified as needed IF the
#     directory exists, otherwise logging will be disabled.
#PORT_LOGDIR=/var/log/portage
#
# PORTDIR_OVERLAY is a directory where local ebuilds may be stored without
#     concern that they will be deleted by rsync updates. Default is not
#     defined.
#PORTDIR_OVERLAY=/usr/local/portage

# Fetching files
# ==============
#
# If you need to set a proxy for wget or lukemftp, add the appropriate "export
# ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if
# all users on your system should use them.
#
# Portage uses wget by default. Here are some settings for some alternate
# downloaders -- note that you need to merge these programs first before they
# will be available.
#
# Default fetch command (5 tries, passive ftp for firewall compatibility)
#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp \${URI} -P \${DISTDIR}"
#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp \${URI} -P \${DISTDIR}"
#
# Using wget, ratelimiting downloads
#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
#
# Lukemftp (BSD ftp):
#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"
#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"
#
# Prozilla (turbo downloader)
#FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}'
#
# Portage uses GENTOO_MIRRORS to specify mirrors to use for source retrieval.
# The list is a space seperated list which is read left to right. If you use
# another mirror we highly recommend leaving the default mirror at the end of
# the list so that portage will fall back to it if the files cannot be found
# on your specified mirror. We _HIGHLY_ recommend that you change this setting
# to a nearby mirror by merging and using the 'mirrorselect' tool.
GENTOO_MIRRORS="http://www.die.unipd.it/pub/Linux/distributions/gentoo-sources/"#  http://gentoo.oregonstate.edu http://www.ibiblio.org/pub/Linux/distributions/gentoo"
#
# Portage uses PORTAGE_BINHOST to specify mirrors for prebuilt-binary packages.
# The list is a single extry specifying the full address of the directory
# serving the tbz2's for your system. Running emerge with either '--getbinpkg'
# or '--getbinpkgonly' will cause portage to retrieve the metadata from all
# packages in the directory specified, and use that data to determine what will
# be downloaded and merged. '-g' or '-gK' are the recommend parameters. Please
# consult the man pages and 'emerge --help' for more information.
#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site/pub/grp/i686/athlon-xp/"
#PORTAGE_BINHOST="http://grp.mirror.site/gentoo/grp/1.4/i686/athlon-xp/"

# Synchronizing Portage
# =====================
#
# Each of these settings effects how Gentoo synchronizes your Portage tree.
# Synchronization is handled by rsync and these settings allow some control
# over how it is done.
#
#
# SYNC is the server used by rsync to retrieve a localized rsync mirror
#     rotation. This allows you to select servers that are geographically
#     close to you, yet still distribute the load over a number of servers.
#     Please do not single out specific rsync mirrors. Doing so places undue
#     stress on particular mirrors.  Instead you may use one of the following
#     continent specific rotations:
#
#   Default:       "rsync://rsync.gentoo.org/gentoo-portage"
#   North America: "rsync://rsync.namerica.gentoo.org/gentoo-portage"
#   South America: "rsync://rsync.samerica.gentoo.org/gentoo-portage"
#   Europe:        "rsync://rsync.europe.gentoo.org/gentoo-portage"
#   Asia:          "rsync://rsync.asia.gentoo.org/gentoo-portage"
#   Australia:     "rsync://rsync.au.gentoo.org/gentoo-portage"
#SYNC="rsync://rsync3.it.gentoo.org/gentoo-sources"
#
# RSYNC_RETRIES sets the number of times portage will attempt to retrieve
#     a current portage tree before it exits with an error. This allows
#     for a more successful retrieval without user intervention most times.
#RSYNC_RETRIES="3"
#
# RSYNC_TIMEOUT sets the length of time rsync will wait before it times out
#     on a connection. Most users will benefit from this setting as it will
#     reduce the amount of 'dead air' they experience when they run across
#     the occasional, unreachable mirror. Dialup users might want to set this
#     value up around the 300 second mark.
#RSYNC_TIMEOUT=180

# Advanced Features
# =================
#
# MAKEOPTS provides extra options that may be passed to 'make' when a
#     program is compiled. Presently the only use is for specifying
#     the number of parallel makes (-j) to perform. The suggested number
#     for parallel makes is CPUs+1.
MAKEOPTS="-j2"
#
# PORTAGE_NICENESS provides a default increment to emerge's niceness level.
#     Note: This is an increment. Running emerge in a niced environment will
#     reduce it further. Default is unset.
PORTAGE_NICENESS=3
#
# AUTOCLEAN enables portage to automatically clean out older or overlapping
#     packages from the system after every successful merge. This is the
#     same as running 'emerge -c' after every merge. Set with: "yes" or "no".
#     This does not affect the unpacked source. See 'noclean' below.
AUTOCLEAN="yes"
#
# FEATURES are settings that affect the functionality of portage. Most of
#     these settings are for developer use, but some are available to non-
#     developers as well.
#
#  'autoaddcvs'  causes portage to automatically try to add files to cvs
#                that will have to be added later. Done at generation times
#                and only has an effect when 'cvs' is also set.
#  'buildpkg'    causes binary packages to be created of all packages that
#                are merged.
#  'ccache'      enables ccache support via CC.
#  'cvs'         feature for developers that causes portage to enable all
#                cvs features (commits, adds) and all USE flags in SRC_URI
#                will be applied for digests.
#  'digest'      autogenerate a digest for packages.
#  'distcc'      enables distcc support via CC.
#  'fixpackages' allows portage to fix binary packages that are stored in
#                PKGDIR. This can consume a lot of time. 'fixpackages' is
#                also a script that can be run at any given time to force
#                the same actions.
#  'keeptemp'    prevents the clean phase from deleting the temp files ($T)
#                from a merge.
#  'keepwork'    prevents the clean phase from deleting the WORKDIR.
#  'noauto'      causes ebuild to perform only the action requested and
#                not any other required actions like clean or
#  'noclean'     prevents portage from removing the source and temporary files
#                after a merge -- for debugging purposes only.
#  'nostrip'     prevents stripping of binaries.
#  'notitles'    disables xterm titlebar updates (which contain status info).
#  'sandbox'     enable sandbox-ing when running emerge and ebuild
#  'strict'      causes portage to react strongly to conditions that
#                have the potential to be dangerous -- like missing or
#                incorrect Manifest files.
#  'userpriv'    allows portage to drop root privleges while it is compiling
#                as a security measure, and as a side effect this can remove
#                sandbox access violations for users.
#  'usersandbox' enables sandboxing while portage is running under userpriv.
#                unpack -- for debugging purposes only.
#FEATURES="sandbox buildpkg ccache distcc userpriv usersandbox notitles noclean noauto cvs keeptemp keepwork"
#
# CCACHE_SIZE sets the space use limitations for ccache. The default size is
#     2G, and will be set if not defined otherwise and ccache is in features.
#     Portage will set the default ccache dir if it is not present in the
#     user's environment, for userpriv it sets: ${PORTAGE_TMPDIR}/ccache
#     (/var/tmp/ccache), and for regular use the default is /root/.ccache.
#     Sizes are specified with 'G' 'M' or 'K'.
#     '4G' for 4 gigabytes, '4096M' for 4 gigabytes, etc... Default is 2G
#CCACHE_SIZE="2G"
#
# DISTCC_DIR sets the temporary space used by distcc.
#DISTCC_DIR="${PORT_TMPDIR}/.distcc"
#
# RSYNC_EXCLUDEFROM is a file that portage will pass to rsync when it updates
#     the portage tree. Specific chucks of the tree may be excluded from
#     consideration. This may cause dependency failures if you are not careful.
#     The file format is one pattern per line, blanks and ';' or '#' lines are
#     comments. See 'man rsync' for more details on the exclude-from format.
#RSYNC_EXCLUDEFROM=/etc/portage/rsync_excludes
CONFIG_PROTECT="/etc/make.conf /etc/lilo.conf /etc/conf.d/hdparm /etc/crontab /etc/profile /etc/fstab /etc/group /etc/passwd /etc/shadow /etc/init.d/modules /etc/conf.d/rc /etc/conf/net /etc/X11/xorg.conf /etc/ssmtp/ssmtp.conf"


...a così:

Code:
 # sguscia /etc/make.conf
LANG='39'
USE="X alsa fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowex mmx2 g77 samba arts kde -unicode 3dnow dvd xvid divx4linux kahakai real live"
COMPILER="diet"
CHOST="i686-pc-linux-gnu"
CFLAGS="-mcpu=athlon-xp -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
PORTAGE_NICENESS=3
AUTOCLEAN="yes"
CONFIG_PROTECT="/etc/make.conf /etc/lilo.conf /etc/conf.d/hdparm /etc/crontab /etc/profile /etc/fstab /etc/group /etc/passwd /etc/shadow /etc/init.d/modules /etc/conf.d/rc /etc/conf/net /etc/X11/xorg.conf /etc/ssmtp/ssmtp.conf"


Last edited by Tiro on Fri Dec 10, 2004 11:10 pm; edited 1 time in total
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Dec 10, 2004 4:38 pm    Post subject: Reply with quote

Nei nuovi livecd il make.conf e' senza commenti e piccolissimo. Quello che hai tu si trova in make.conf.example
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
Tiro
l33t
l33t


Joined: 14 Feb 2003
Posts: 752
Location: italy

PostPosted: Fri Dec 10, 2004 4:58 pm    Post subject: Reply with quote

Quote:
Nei nuovi livecd il make.conf e' senza commenti e piccolissimo. Quello che hai tu si trova in make.conf.example


..beh in verità la prova sul make.conf era solo un esempio.. :roll:
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Dec 10, 2004 5:10 pm    Post subject: Reply with quote

Tiro wrote:
..beh in verità la prova sul make.conf era solo un esempio.. :roll:

Si si chiaro. Mi sono spiegato male. E' un ottimo tip per postare le varie configurazioni sul forum senza mettere i commenti cosi' avremo post un po' piu' light :D
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
FonderiaDigitale
Veteran
Veteran


Joined: 06 Nov 2003
Posts: 1710
Location: Rome, Italy

PostPosted: Fri Dec 10, 2004 6:38 pm    Post subject: Reply with quote

mio piccolo contributo (partorito per l'occasione :P)
readme
Code:
readme ()
{
   while [ $1 ]; do
      echo -en "\nFile \033[1;37m$1\033[0m"
      if [ ! -r $1 ]; then
         echo " is not readable!"
      else
         echo
         for ((a=0;a < ((${#1}+7));a++)); do echo -n -; done
         echo
         while read -a line; do
            if [[ ! ${line[*]} =~ "^(#|!|;|//).*$|^( *)$" ]]; then
               echo "${line[*]}";
            fi
         done < $1
      fi
      shift
   done
}


per usarlo, includerlo in /etc/bashrc o ~/.bashrc.
caratteristiche salienti:
  • Possono essere visualizzati tot file passati come parametro alla funzione
  • Parsing dei commenti standard ( #), c ( // ); tipo samba ( ; ), tipo TCL ( ! )

  • puo' essere passato a less per paging.

_________________
Come disse un amico, i sistemisti sono un po' come gli artigiani per l'informatica :)
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Dec 10, 2004 6:56 pm    Post subject: Reply with quote

@FonderiaDigitale: Sei sicuro che funziona?
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
FonderiaDigitale
Veteran
Veteran


Joined: 06 Nov 2003
Posts: 1710
Location: Rome, Italy

PostPosted: Fri Dec 10, 2004 6:57 pm    Post subject: Reply with quote

sul mio sistema funziona.
_________________
Come disse un amico, i sistemisti sono un po' come gli artigiani per l'informatica :)
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Dec 10, 2004 6:58 pm    Post subject: Reply with quote

Ma la linea
Code:
if [[ ! ${line[*]} =~ "^(#|!|;|//).*$|^( *)$" ]]

non dovrebbe gia' avere degli spazi cosi'
Code:
if [ [ ! ${line[*]} =~ "^(#|!|;|//).*$|^( *)$" ] ]

_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
FonderiaDigitale
Veteran
Veteran


Joined: 06 Nov 2003
Posts: 1710
Location: Rome, Italy

PostPosted: Fri Dec 10, 2004 7:00 pm    Post subject: Reply with quote

>=bash 3 ;)
_________________
Come disse un amico, i sistemisti sono un po' come gli artigiani per l'informatica :)
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Dec 10, 2004 7:01 pm    Post subject: Reply with quote

FonderiaDigitale wrote:
>=bash 3 ;)

A ecco il trucco. Comunque con la app-shells/bash-2.05b-r9 non va :(

EDIT: Anche il for alla C e' solo per bash 3
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
FonderiaDigitale
Veteran
Veteran


Joined: 06 Nov 2003
Posts: 1710
Location: Rome, Italy

PostPosted: Fri Dec 10, 2004 10:14 pm    Post subject: Reply with quote

attento xche molti script gentoo compreso il baselayout ~x86 ormai chiedono la versione 3.
_________________
Come disse un amico, i sistemisti sono un po' come gli artigiani per l'informatica :)
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Dec 10, 2004 10:15 pm    Post subject: Reply with quote

FonderiaDigitale wrote:
attento xche molti script gentoo compreso il baselayout ~x86 ormai chiedono la versione 3.

A ecco comunque io giro in x86 quindi non mi preoccupo :P
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
silian87
Advocate
Advocate


Joined: 06 Oct 2003
Posts: 2318
Location: Treviso, Italy

PostPosted: Fri Dec 10, 2004 10:56 pm    Post subject: Reply with quote

cmq io levo sempre il make.conf per mettere il make.conf.example... mi piace molto di piu', con i commenti si capisce molto meglio ed e' piu' semplice aggiungere nuove opzioni. Non penso sia una buona idea levare i commenti... cmq IMHO
_________________
Musica che ascolto: http://www.last.fm/user/silian87/

Silian87 FAQs: http://marentax.homelinux.org/~silian87/silian87-faq.txt

GTalk: silian87@gmail.com
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Dec 10, 2004 10:59 pm    Post subject: Reply with quote

beh ma nel tuo lasci senza commenti quando vuoi aggiungere qualcosa vai nel file di esempio a vedere
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
Kernel78
Moderator
Moderator


Joined: 24 Jun 2005
Posts: 3654

PostPosted: Wed Mar 29, 2006 9:27 am    Post subject: Reply with quote

Uppo questo topic perchè l'ho trovato adesso e volevo contribuire.
Il metodo che uso io mi piace perchè semplice e funzionale, mi sono fatto un alias (chiamiamolo "sguscia" in onore all'autore della discussione) per
Code:
grep -vE '(^[[:space:]]*$|^[[:space:]]*(#|!|;|//))'

e si può decommentare un file di questo tipo
Code:
$ dog commenti
prima riga
#commento
        !commento
 #commento
      ;commento

seconda riga

terza riga
//commento
;commento
!commento

con commenti di ogni tipo e ottenere
Code:
$ sguscia commenti
prima riga
seconda riga
terza riga

Spero possa essere utile a qualcuno.
_________________
Le tre grandi virtù di un programmatore: pigrizia, impazienza e arroganza. (Larry Wall).
Prima di postare un file togli i commenti con
Code:
grep -vE '(^[[:space:]]*($|(#|!|;|//)))'
Back to top
View user's profile Send private message
Luca89
Advocate
Advocate


Joined: 27 Apr 2005
Posts: 2107
Location: Agrigento (Italy)

PostPosted: Wed Mar 29, 2006 2:02 pm    Post subject: Reply with quote

bel trucchetto, non lo sapevo. :D
_________________
Running Fast!
Back to top
View user's profile Send private message
[PHT]Giangi
Tux's lil' helper
Tux's lil' helper


Joined: 27 Dec 2004
Posts: 110
Location: Rome - ITALY -

PostPosted: Fri Apr 14, 2006 7:50 am    Post subject: Reply with quote

Luca89 wrote:
bel trucchetto, non lo sapevo. :D


Si è vero .... utile. :wink:
_________________
Powered by : Gentoo Linux on PowerMac G5 2 CPU 2.00GHz.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) Risorse italiane (documentazione e tools) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum