cdr and dvdr in fstab

[alejo]

Hello.

I recently installed gentoo in my box, and I've been trying to figure out what do I need to add in my /etc/fstab file to have both my cd-r and my dvd-r mounted when I start the system.
When gentoo loads, it shows the cd-r as hdd and the dvd-r as hdc.
Could any one please help me out with this.

My /etc/fstab is shown below.

thank you

# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.

# <fs> <mountpoint> <type> <opts> <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext2 noauto,noatime 1 2
/dev/hda2 none swap sw 0 0
/dev/hda3 / ext3 noatime 0 1
/dev/hdc /mnt/cdrom auto noauto,user 0 0
/dev/fd0 /mnt/floppy auto noauto,user 0 0

# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:

none /dev/shm tmpfs nodev,nosuid,noexec 0 0
none /proc/bus/usb usbfs defaults 0 0

[psyqil]

/dev/hdc /mnt/cdrom auto noauto,user 0 0

Remove noauto and make a similar line for /dev/hdd. Are you sure you want your CDs mounted every time you boot?

[alejo]

I assumed that I had to created a similar line for hdd, but, if I say /mnt/cdrom, will my drives be mounted as cdrom drives, or will they actually be mounted as a cd-burner and a dvd-burner?

Is there anything else I need to modify to make them load as burners and not just as regular cdroms?

Thanks for your help