View previous topic :: View next topic |
Author |
Message |
Yen Tux's lil' helper
Joined: 19 Oct 2003 Posts: 107 Location: Lummen, Belgium
|
Posted: Tue Aug 31, 2004 7:43 pm Post subject: |
|
|
anyone knows if the wlan (ndiswrapper) works on it in 64bit mode? I just orderd this laptop |
|
Back to top |
|
|
bverheg n00b
Joined: 01 Sep 2002 Posts: 39 Location: Vlaanderen
|
Posted: Wed Sep 01, 2004 6:17 pm Post subject: |
|
|
No, doesn't work.
Other than a 64 bit ndiswrapper you would also need a 64 bit Windows driver, which (AFAIK) is not available yet. Most likely Broadcom will release one when 64 bit Windows becomes more common, but I guess you do not want to wait until that unforeseeable point in future.
If you want WLAN in 64bit now, the best way to go is with a Cardbus interface, like the SMC2835W. Works like a charm and directly supported by the kernel.
Other Prism54 based cards should work equally well. |
|
Back to top |
|
|
thaldyron Apprentice
Joined: 25 Sep 2002 Posts: 227 Location: On Earth
|
Posted: Thu Sep 02, 2004 10:07 am Post subject: |
|
|
No one mentioned the "Warning losing many ticks" problem that seems to occur on every 1501ML in 64bit. AFAIK this has not yet been resolved or did I miss something!?
Last edited by thaldyron on Fri Sep 03, 2004 9:29 pm; edited 1 time in total |
|
Back to top |
|
|
Yen Tux's lil' helper
Joined: 19 Oct 2003 Posts: 107 Location: Lummen, Belgium
|
Posted: Thu Sep 02, 2004 3:35 pm Post subject: |
|
|
Ok, i will use an 32bit kernel as long the wlan isn't supported. (Somewhere in the near future, I hope) |
|
Back to top |
|
|
vwj n00b
Joined: 01 Sep 2004 Posts: 24 Location: Ekeren, Belgium
|
Posted: Fri Sep 03, 2004 9:33 am Post subject: |
|
|
has somebody cpufreq working one aspire 1511, or is it not support by the bios?
I always get:
Code: |
Sep 3 10:46:07 [kernel] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
Sep 3 10:46:07 [kernel] powernow-k8: BIOS error - no PSB
|
|
|
Back to top |
|
|
jaz9090 Apprentice
Joined: 11 Sep 2003 Posts: 214
|
Posted: Sun Sep 05, 2004 10:01 am Post subject: |
|
|
Ive already mentioned this in another thread so i do opologise, but i have just got a 1513LMi 4 my birthday and am wanting 2 install gentoo on it, i am just having the problem that the network is not detected and i cant get it to work can anyone help me? Im assuming its not much of a problem as noone here seems to have had a problem with it
Thanks
James |
|
Back to top |
|
|
n-Teemu n00b
Joined: 04 Jun 2004 Posts: 6 Location: Finland
|
|
Back to top |
|
|
dangertools Apprentice
Joined: 29 Dec 2003 Posts: 278 Location: Saalfelden, Austria
|
Posted: Tue Sep 07, 2004 5:50 pm Post subject: |
|
|
there is a working patch to get the builtin winbond cardreader of the 1500 series work. Till now it just works for mmc (at least i think so, i have to get an mmc card but the output on loading the module looks good) version 0.5 works, 0.4 hardlocks the system so don't try it.
If there are other laptops which' cardreaders work with this patch tell the mailinglist on the projectpage.
http://projects.drzeus.cx/wbsd/
dangertools |
|
Back to top |
|
|
dangertools Apprentice
Joined: 29 Dec 2003 Posts: 278 Location: Saalfelden, Austria
|
Posted: Mon Sep 13, 2004 4:43 pm Post subject: |
|
|
I have a question to someone which has windows installed on an aspire 1501 lmi too. i need some hardwareinformation for testing purposes to get the cardreader driver run properly and i have no windows anymore.
The information i would need is the following: IRQs and DMAs of this devices:
floppy
cardreader
irda-port
keyboard
thanks to everyone who can give me this information
dangertools |
|
Back to top |
|
|
Vegetarian Zombie n00b
Joined: 14 Sep 2004 Posts: 5 Location: Belgium
|
Posted: Tue Sep 14, 2004 9:24 pm Post subject: |
|
|
isn't it possible to use the wifi drivers in the emulated mode?
edit : nm, isn't possible
Last edited by Vegetarian Zombie on Wed Sep 15, 2004 11:58 am; edited 1 time in total |
|
Back to top |
|
|
deepspace9 Apprentice
Joined: 29 Jan 2003 Posts: 214 Location: Netherlands
|
Posted: Tue Sep 14, 2004 11:53 pm Post subject: |
|
|
Hey, did any of you try suspend to disk on a 1501? It works (even with the radeon xorg and fb drivers), but resume is really slow. It seems to hang for a while before it reads the swap to memory (60 sec or so). The system doesn't eem to do anyting). After that, ram get's filled again, and it works great!
Should it be so slow, or are ther just some issues? I'm using gentoo kernel 2.6.8-r1. |
|
Back to top |
|
|
AlienPenguin n00b
Joined: 08 Sep 2004 Posts: 12 Location: Pisa, Italy
|
Posted: Fri Sep 17, 2004 2:33 pm Post subject: |
|
|
Has any of you managed to make pcmcia work? whenever i insert a pc card (i tried just with different 16bit cards i have here at the university) and none of them is recognized at all... so it tries to load the memory_cs module that is not found. |
|
Back to top |
|
|
brodo Guru
Joined: 15 Apr 2003 Posts: 319
|
Posted: Thu Sep 23, 2004 8:57 pm Post subject: |
|
|
AlienPenguin wrote: | Has any of you managed to make pcmcia work? whenever i insert a pc card (i tried just with different 16bit cards i have here at the university) and none of them is recognized at all... so it tries to load the memory_cs module that is not found. | on 32 or 64 bit kernel? i wouldn't be surprised if the pcmcia core would fail on 64-bit kernels... |
|
Back to top |
|
|
brodo Guru
Joined: 15 Apr 2003 Posts: 319
|
Posted: Thu Sep 23, 2004 9:00 pm Post subject: |
|
|
vwj wrote: | has somebody cpufreq working one aspire 1511, or is it not support by the bios?
I always get:
Code: |
Sep 3 10:46:07 [kernel] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
Sep 3 10:46:07 [kernel] powernow-k8: BIOS error - no PSB
|
|
set CONFIG_ACPI_PROCESSOR to "y" in your kernel config, recompile, install, and post Code: | dmesg | grep -4 powernow-k8 |
|
|
Back to top |
|
|
dangertools Apprentice
Joined: 29 Dec 2003 Posts: 278 Location: Saalfelden, Austria
|
Posted: Fri Sep 24, 2004 8:34 am Post subject: |
|
|
i never had a problem with the pcmcia ports. i work now on 64bit with a prism cardbus card and it works. they are recognized as ricoh ports. And the cardreader works too
dangertools |
|
Back to top |
|
|
vwj n00b
Joined: 01 Sep 2004 Posts: 24 Location: Ekeren, Belgium
|
Posted: Fri Sep 24, 2004 4:52 pm Post subject: |
|
|
thx for the reply brodo, but my kernel is configured with CONFIG_ACPI_PROCESSOR and all other stuff
Here is my config file
Code: |
/usr/src//linux-2.6.7-gentoo-r14/.config
.....
CONFIG_ACPI_PROCESSOR=y
.....
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
.....
|
And the output in the previous messages was from dmesg
One question has the dsdt table somthing to do with psb table
grts
jan |
|
Back to top |
|
|
brodo Guru
Joined: 15 Apr 2003 Posts: 319
|
Posted: Fri Sep 24, 2004 7:48 pm Post subject: |
|
|
vwj wrote: |
And the output in the previous messages was from dmesg
One question has the dsdt table somthing to do with psb table
grts
jan | yes it may have something to do with it. And probably something is broken in the dsdt... |
|
Back to top |
|
|
vwj n00b
Joined: 01 Sep 2004 Posts: 24 Location: Ekeren, Belgium
|
|
Back to top |
|
|
RAPUL l33t
Joined: 29 Dec 2002 Posts: 664 Location: Valencia (SPAIN)
|
Posted: Sat Sep 25, 2004 6:03 pm Post subject: Customize Software Keys in Acer 1513Lmi. |
|
|
vyzivus wrote: | Anybody out there that was succesfull capturing the mail,browser,p1,p2 buttons on 1501LMi? I had stopped X, tried the showkey command but it seems that these keys does not generate any keycodes at all.
Quote: | Jun 7 20:59:10 baerbel atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0).
Jun 7 20:59:10 baerbel atkbd.c: Use 'setkeycodes e060 <keycode>' to make it known. |
No sign of these messages, but my keyboard behaves strangely sometimes: the key is repeated after i release the button etc. |
My browser, email, p1, p2, VolumeUp, VolumeDown, VolumeMute and some more buttons work doing a dirty trick but it works:
I add some code on some of my files:
Code: |
- In /etc/init.d/local
# Load keys
setkeycodes e073 120
setkeycodes e074 121
setkeycodes e025 125
setkeycodes e026 126
setkeycodes e027 127
|
Code: |
- In a valid modmap file such as ~/.xmodmaprc. I don't add the full code only the new code:
keycode 115 = XF86Launch2
keycode 116 = XF86Launch3
keycode 117 = XF86Launch4
keycode 134 = XF86Launch1
keycode 139 = XF86Launch0
keycode 160 = XF86AudioMute
keycode 174 = XF86AudioLowerVolume
keycode 176 = XF86AudioRaiseVolume
keycode 178 = XF86WWW
keycode 236 = XF86Mail
|
Code: |
- I created the file ~/.kde/Autostart/xmodmap.sh which loaded a valid map file modified with the above new keys
#!/bin/bash
#
/usr/X11R6/bin/xmodmap ~/.xmodmaprc
|
And then i linked some of those X events to actions using Khotkeys in kde. Volume keys was not needed to be linked because it worked without it. X*Volume* events triggered the actions.
If you want to get more information i suggest you getting information about:
Code: |
setkeycodes
xmodmap
|
I hope it helped you. _________________ Entropy rulz world.
Redundancy sux.
World is full of redundancy.
World sux. |
|
Back to top |
|
|
RAPUL l33t
Joined: 29 Dec 2002 Posts: 664 Location: Valencia (SPAIN)
|
Posted: Sat Sep 25, 2004 6:13 pm Post subject: cpufreqd working in Acer Aspire 1513 Lmi |
|
|
cpufreqd works for me in an Acer Aspire 1513Lmi.
Try mi dsdt file if you want but dsdt only affected battery status or not in my case:
http://alba.tlc.upv.es:8080/~rapul/acer/dsdt.dsl.gz
cpufreqd.conf:
Code: |
[General]
pidfile=/var/run/cpufreqd.pid
poll_interval=2
pm_type=acpi #(acpi, apm or pmu)
# Uncomment the following line to enable ACPI workaround (see cpufreqd.conf(5))
acpi_workaround=1
verbosity=4 #(if you want a minimal logging set to 5)
[Profile]
name=hi_boost
minfreq=2200000
maxfreq=2200000
policy=performance
[Profile]
name=medium_boost
minfreq=2000000
maxfreq=2000000
policy=performance
[Profile]
name=lo_boost
minfreq=1800000
maxfreq=1800000
policy=performance
[Profile]
name=lo_power
minfreq=800000
maxfreq=800000
policy=powersave
# Ultra conservative mode when not AC and CPU idle
[Rule]
name=ultra_conservative
ac=off # (on/off)
battery_interval=0-100
cpu_interval=0-99
profile=lo_power
#profile=hi_boost
# conservative mode when not AC
[Rule]
name=conservative
ac=off # (on/off)
battery_interval=0-100
cpu_interval=99-100
profile=lo_boost
# AC and CPU idle
[Rule]
name=ac_idle
ac=on
cpu_interval=0-40
profile=lo_power
# AC and full load
[Rule]
name=ac_full
ac=on
cpu_interval=40-100
profile=hi_boost
|
And some keys of my .config:
Code: |
# Power management options (ACPI, APM)
# ACPI (Advanced Configuration and Power Interface) Support
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=y
|
_________________ Entropy rulz world.
Redundancy sux.
World is full of redundancy.
World sux. |
|
Back to top |
|
|
giuseppe Tux's lil' helper
Joined: 25 Apr 2004 Posts: 78
|
Posted: Sun Sep 26, 2004 3:17 pm Post subject: |
|
|
Hi! Does someone know if,on 1513lmi or 1511lmi, the irda work? If it's yes then: how do it work? _________________ "Unter einer Menge verstehen wir jede
Zusammenfassung M Von bestimmten
wohlunterschiedenen Objekten in unserer
Anschauung oder unseres Denkens (welche
die Elemente von M genannt werden) zu einem ganzen." Georg Cantor |
|
Back to top |
|
|
Luki` n00b
Joined: 30 Sep 2004 Posts: 3 Location: Soest
|
Posted: Thu Sep 30, 2004 2:26 pm Post subject: |
|
|
Is there someone who had some problems mit the harddisk?
I can´t install Gentoo booting from the 2004.2 Live CD because fdisk don´t want to use hda. While booting i see how my harddisk gets the devicename hda, no errors.
#fdisk /dev/hda
unable to open /dev/hda
Best regards,
Lukas |
|
Back to top |
|
|
dangertools Apprentice
Joined: 29 Dec 2003 Posts: 278 Location: Saalfelden, Austria
|
Posted: Thu Sep 30, 2004 2:50 pm Post subject: |
|
|
To all the ones which are not able to read the sticky things on top of the forum
READ THEM!!!!!!!!
Every second asks why his harddisk isn't recognized.
dangertools |
|
Back to top |
|
|
bverheg n00b
Joined: 01 Sep 2002 Posts: 39 Location: Vlaanderen
|
Posted: Thu Sep 30, 2004 3:00 pm Post subject: Re: Customize Software Keys in Acer 1513Lmi. |
|
|
RAPUL wrote: |
My browser, email, p1, p2, VolumeUp, VolumeDown, VolumeMute and some more buttons work doing a dirty trick but it works:
|
The volume buttons I got working, but how do you get the others ones working? On my 1501 Lmi they do not even produce a scan code.
Am I missing something? |
|
Back to top |
|
|
dangertools Apprentice
Joined: 29 Dec 2003 Posts: 278 Location: Saalfelden, Austria
|
Posted: Thu Sep 30, 2004 3:07 pm Post subject: |
|
|
on the 1501 you need acerhk because the keys produce acpi-events. but afaik the acerhk package doesn't work on amd64 but i haven't tried them for a while
dangertools |
|
Back to top |
|
|
|