Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
2.6.9-rc1-nitro4 "It works better if you plug it in&
View unanswered posts
View posts from last 24 hours

Goto page 1, 2, 3, 4, 5  Next  
Reply to topic    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
seppe
Guru
Guru


Joined: 01 Sep 2003
Posts: 431
Location: Hove, Antwerp, Belgium

PostPosted: Fri Sep 10, 2004 6:20 pm    Post subject: 2.6.9-rc1-nitro4 "It works better if you plug it in& Reply with quote

Prepare to plug this new nitro patchset in your 2.6.9-rc1 kernel!

Applied patches
Code:

2.6.9-rc1-nitro4 "It works better if you plug it in"
****************************************************
# Start of CK7 base
from_2.6.8.1_to_staircase8.0 | A complete scheduler policy rewrite
schedrange.diff | Infrastructure for more policies
schedbatch2.4.diff | Batch scheduling
schediso2.5.diff | Isochronous scheduling
sched-adjust-p4gain | Optimize scheduler for Pentium 4
mapped_watermark.diff | Lighter caching, very unlikely to swap 
defaultcfq.diff | Enables the CFQ (completely fair queueing) I/O scheduler by default
config_hz.diff | Set the internal clock frequency
1g_lowmem_i386.diff | Allows 1G ram without enabling highmem
akpm-latency-fix.patch | Minor latency improvement hack
9000-SuSE-117-writeback-lat.patch | Writeback latency fix
cddvd-cmdfilter-drop.patch | cdrecord fix
cool-spinlocks-i386.diff | reduces kernel text size + better cache utilisation
bio_uncopy_user-mem-leak.patch | fixes memory leak
bio_uncopy_user2.diff | fixes memory leak
supermount-ng205.diff | automaticly mount removable media
fbsplash-0.9-r8-2.6.9-rc1.patch | Gensplash, a bootsplash replacement for Gentoo
make-tree_lock-an-rwlock.patch | Convert tree_lock to an rwlock, improves performance at Oracle
invalidate_inodes-speedup.patch | add seperate list for searching in the inode lists
2.6.8.1-mm2-reiser4.diff | The Reiser4 filesystem
change_reiser4_config.diff | Do not allow 4k stacks with Reiser4
s8.0_s8.1 | Update Staircase 8.0 to 8.1
mapped_watermark_fix.diff | Fix a watermark bug
sc_mw.diff | Staircase fix
1g_change_config.diff | Set default to N for 1g_lowmem patch
lenient_uw.diff | page alloc fix
s8.1_test1 | Staircase update
s8.1test1_test2 | Staircase update
s8.1_smtfix | Staircase fix
cfq_iosched_v2.patch | Completely Fair Queueing v2
vesafb-tng-0.9-rc4-r2-2.6.8.1.patch | a new and more functional version of the vesafb Linux driver
vesafb_change_config.diff | change default fb
back_journal_clean_checkpoint_list-latency-fix.patch | Minor latency improvement patch
# End of CK7 base
acpi-dsdt-initrd-patch-v0.6-2.6.9.patch | Custom acpi dsdt
viafb_02.diff | VIA Framebuffer
via-v4l-1.4a-drm.patch | VIA Video4Linux
cpu-vendor-select.diff | select more than 1 CPU vendor
alsa-bk-2004-08-26.patch | new drivers for Advanced Linux Sound System
lirc-2.6.5-mm1-20040406 | Linux InfraRed Control support
use_KERNELRELEASE_more.patch | needed for the new menuconfig-NAME patch
menuconfig-NAME-v2.1-dev5.patch | Show kernel name in menuconfig
squashfs2.0-patch | SquashFS v2.0, a squashed read-only filesystem for Linux
gcloop-2.6-20040527.patch | Gentoo Compressed loopback support for 2.6
lufs-0.9.7-2.6.0-test9.patch | Linux Userland FileSystem (mount ftp connections, etc ..)
omnibook-2.6.8-rc2-bk2.diff | omnibook support
config-nr-tty-devices.diff | config /dev/tty* count for a cleaner /dev
cdfs-2.6.3a.diff | exports all tracks and boot images on a CD as normal files
ipw2100-2.6.8-patch | Intel Pro Wireless 2100 drivers
acx100-2.6.8-rc2-bk2.diff | ACX WLAN drivers
acerhk.patch | Acer HotKeys support (UNTESTED!)
iteraid_1.44.diff | Giga Raid
configurable-hid-mouse-polling-2.6.9-rc1.patch | usb 500hz mouse hack
packet-2.6.8-2.patch | packet writing support for CD/DVD RW's
journal_clean_checkpoint_list-latency-fix.patch | minor latency improvement hack
pty_write-latency-fix.patch | minor latency improvement hack
igxb-speedup.patch | speed up interrupt routine call
kallsyms-data-size-reduction--lookup-speedup.patch | speedup kallsyms
get_user_pages-latency-fix.patch | minor latency improvement hack


Download
ebuild
bz2

What's new, what's in, what's out?
latest ALSA drivers are in
CFQ v2 is in
kernel-events is out
select-cpu-vendor is in
CK's patches are updated
vesafb-tng is updated
orinoco is out, if you want it back in then post an url to an updated patch

Warning
Nitro-sources isn't well tested at all, so things could always go wrong. Always keep a second kernel image ready in your boot manager.

Help and info
IRC: irc.freenode.net #nitro-sources
WWW: http://sepi.be/nitro.php
RSS: http://sepi.be/nitro-rss.php

Have fun with it!
_________________
nitro-sources, because between stable and experimental there exists only speed

Latest release I made: 2.6.13.2-nitro1
Back to top
View user's profile Send private message
ep98
Apprentice
Apprentice


Joined: 08 Jul 2003
Posts: 232
Location: Bulgaria

PostPosted: Fri Sep 10, 2004 6:56 pm    Post subject: Reply with quote

Hmmm, let's giv it a try :twisted:
_________________
If u cant give advice, dont send the helpless to the HOWTO's way or Google.com way.
Back to top
View user's profile Send private message
Meqif
Tux's lil' helper
Tux's lil' helper


Joined: 09 Mar 2003
Posts: 103
Location: Portugal

PostPosted: Fri Sep 10, 2004 7:25 pm    Post subject: Reply with quote

This release doesn't need DaMouse's nvidia-kernel overlay; to tell the truth I couldn't load it. The "normal" nvidia-kernel works fine, though.

Everything works here, including reiser4, vesafb-tng and fbsplash (no more corruption :D).
Back to top
View user's profile Send private message
MighMoS
Guru
Guru


Joined: 24 Apr 2003
Posts: 416
Location: @ ~

PostPosted: Fri Sep 10, 2004 7:28 pm    Post subject: Reply with quote

Compiled without errors! Yayness!

*installing now*
_________________
jabber: MighMoS@jabber.org

localhost # export HOME=`which heart`
Back to top
View user's profile Send private message
DaMouse
Apprentice
Apprentice


Joined: 18 Jul 2003
Posts: 233

PostPosted: Fri Sep 10, 2004 7:35 pm    Post subject: Reply with quote

Meqif wrote:
This release doesn't need DaMouse's nvidia-kernel overlay; to tell the truth I couldn't load it. The "normal" nvidia-kernel works fine, though.

Everything works here, including reiser4, vesafb-tng and fbsplash (no more corruption :D).


The api differences in -mm and vanilla are such that this should be true on all but -mm based patchsets

-DaMouse
_________________
I am the dark lord DaMouse I eat souls and wear the dressing gown of evil.
Back to top
View user's profile Send private message
The Unlimited
n00b
n00b


Joined: 31 Jul 2004
Posts: 27
Location: Germany

PostPosted: Fri Sep 10, 2004 7:40 pm    Post subject: Reply with quote

Yay! New Nitro for us Nitro-junkies. :)
_________________
Copyright © 2003-2005 The Unlimited.
Permission is granted to copy, distribute and/or modify this post under the terms of the GNU Free Documentation License, Version 1.2 or any later version.
Back to top
View user's profile Send private message
Meqif
Tux's lil' helper
Tux's lil' helper


Joined: 09 Mar 2003
Posts: 103
Location: Portugal

PostPosted: Fri Sep 10, 2004 8:26 pm    Post subject: Reply with quote

DaMouse wrote:
Meqif wrote:
This release doesn't need DaMouse's nvidia-kernel overlay; to tell the truth I couldn't load it. The "normal" nvidia-kernel works fine, though.

Everything works here, including reiser4, vesafb-tng and fbsplash (no more corruption :D).


The api differences in -mm and vanilla are such that this should be true on all but -mm based patchsets

-DaMouse


So that's why... Thanks for the explanation :)
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Fri Sep 10, 2004 8:27 pm    Post subject: Reply with quote

I get this when including vesa-tng in the kernel:

Code:
drivers/built-in.o(.init.text+0x7543): In function `vesafb_probe':
: undefined reference to `vesa_modes'


Reverted to old vesa and no problems.
Back to top
View user's profile Send private message
codergeek42
Bodhisattva
Bodhisattva


Joined: 05 Apr 2004
Posts: 5142
Location: Anaheim, CA (USA)

PostPosted: Fri Sep 10, 2004 8:31 pm    Post subject: Reply with quote

jubenvi wrote:
I get this when including vesa-tng in the kernel:

Code:
drivers/built-in.o(.init.text+0x7543): In function `vesafb_probe':
: undefined reference to `vesa_modes'


Reverted to old vesa and no problems.
I get the same exact thing on my 2.6.9-rc1-bk16-ck1 kernel...old vesafb works like a charm for the moment, though.
_________________
~~ Peter: Programmer, Mathematician, STEM & Free Software Advocate, Enlightened Agent, Transhumanist, Fedora contributor
Who am I? :: EFF & FSF
Back to top
View user's profile Send private message
sobers_2002
Veteran
Veteran


Joined: 16 Mar 2004
Posts: 1128

PostPosted: Fri Sep 10, 2004 9:22 pm    Post subject: Reply with quote

u have to enable video mode helpers in kernel to get rid of that

EDIT:- this is the fastest and the most stable kernel i have ever had here :D :D :D
_________________
Pdict - dockable dictionary client for linux
FREE97WIN: Use this code on Dreamhost and you get $97 off !!


Last edited by sobers_2002 on Mon Sep 13, 2004 10:21 pm; edited 1 time in total
Back to top
View user's profile Send private message
kaosone
Guru
Guru


Joined: 01 Feb 2004
Posts: 446

PostPosted: Fri Sep 10, 2004 9:59 pm    Post subject: Reply with quote

mmm some problems compiling with CONFIG_IP_NF_CONNTRACK=m
now i'm without it but my firewall doesn't work :(
Back to top
View user's profile Send private message
Moloch
Apprentice
Apprentice


Joined: 17 Mar 2003
Posts: 293
Location: Albuquerque, NM, US

PostPosted: Fri Sep 10, 2004 10:01 pm    Post subject: Reply with quote

Wow excellent release! Not only did my problem of sound being choppy with cedega resolve itself, but this kernel is noticably faster.

No apparent stability problems either... at least not kernel related. The new Xorg likes to crash with all it's transparency crap, but the kernel keeps the system in perfect order.
Back to top
View user's profile Send private message
hotplainrice
Tux's lil' helper
Tux's lil' helper


Joined: 25 Apr 2004
Posts: 92

PostPosted: Sat Sep 11, 2004 12:43 am    Post subject: Reply with quote

Is it possible to patch this with swsusp?
Back to top
View user's profile Send private message
seppe
Guru
Guru


Joined: 01 Sep 2003
Posts: 431
Location: Hove, Antwerp, Belgium

PostPosted: Sat Sep 11, 2004 12:49 am    Post subject: Reply with quote

hotplainrice wrote:
Is it possible to patch this with swsusp?

I tried to add it, and there were only 2 easy rejects. But when I tried to compile it, then I got several hard to fix errors. If anyone want to fix them, be my guest :)
_________________
nitro-sources, because between stable and experimental there exists only speed

Latest release I made: 2.6.13.2-nitro1
Back to top
View user's profile Send private message
nuzzy
Tux's lil' helper
Tux's lil' helper


Joined: 21 Jul 2003
Posts: 106
Location: NH, USA

PostPosted: Sat Sep 11, 2004 12:59 am    Post subject: Reply with quote

hmmm...just tried to upgrade from 2.6.8.1-nitro5 and when it goes to get an eth0 address it hangs. I have the Old Becker Intel EtherExpress Pro driver built into the kernel, not as a module and it was working fine before the upgrade. I tried the Intel Pro 100+ driver listed in there as well with no success. Any others have any problems?
Back to top
View user's profile Send private message
juppe22
n00b
n00b


Joined: 10 Jun 2003
Posts: 74

PostPosted: Sat Sep 11, 2004 1:02 am    Post subject: Reply with quote

Really nice work Seppe!!

Thanks!! :)
Back to top
View user's profile Send private message
codergeek42
Bodhisattva
Bodhisattva


Joined: 05 Apr 2004
Posts: 5142
Location: Anaheim, CA (USA)

PostPosted: Sat Sep 11, 2004 1:49 am    Post subject: Reply with quote

sobers_2002 wrote:
u have to enable video mode helpers in kernel to get rid of that.
That did it. Thanx.
_________________
~~ Peter: Programmer, Mathematician, STEM & Free Software Advocate, Enlightened Agent, Transhumanist, Fedora contributor
Who am I? :: EFF & FSF
Back to top
View user's profile Send private message
FonderiaDigitale
Veteran
Veteran


Joined: 06 Nov 2003
Posts: 1710
Location: Rome, Italy

PostPosted: Sat Sep 11, 2004 2:41 am    Post subject: Re: 2.6.9-rc1-nitro4 "It works better if you plug it in Reply with quote

seppe wrote:

orinoco is out, if you want it back in then post an url to an updated patch


here release SN5.

Just unpack, copy *.[ch] over drivers/net/wireless, and compile. They work GREAT and support both scanning and monitor mode.
_________________
Come disse un amico, i sistemisti sono un po' come gli artigiani per l'informatica :)
Back to top
View user's profile Send private message
Headrush
Watchman
Watchman


Joined: 06 Nov 2003
Posts: 5597
Location: Bizarro World

PostPosted: Sat Sep 11, 2004 4:10 am    Post subject: Reply with quote

Noticeable static when playing midi format on Emu 10k1 based board. Starts fine but after about a minute, it is occurs. No problem with PCM based sound so might be a sequencer problem.

Will recompile without ALSA from nitro and try separate alsa-driver-1.0.5 and see if problem persists.
Back to top
View user's profile Send private message
MighMoS
Guru
Guru


Joined: 24 Apr 2003
Posts: 416
Location: @ ~

PostPosted: Sat Sep 11, 2004 4:54 am    Post subject: Reply with quote

Coolness! Now gensplash doesn't show the ugly text console when booting for the first two seconds.

However, I do have a question. With this kernel (and some others in the past), when I switch VCs, the screen blacks it self for half a seconds, almost like its changing resolution. It didn't do this w/ the 2.6.8.1 kernels and it would go directly to them, but 2.6.9-pre* has that delay. Any idea on what's causing it?
_________________
jabber: MighMoS@jabber.org

localhost # export HOME=`which heart`
Back to top
View user's profile Send private message
Cagnulein
l33t
l33t


Joined: 18 Sep 2003
Posts: 861
Location: Modena, Italy

PostPosted: Sat Sep 11, 2004 5:14 am    Post subject: Reply with quote

works fine but a bit slower than nitro3

Code:
2.6.9-rc1-nitro1 Sat Sep  4 14:47:19 2004     49.349
2.6.9-rc1-nitro3 Mon Sep  6 13:01:52 2004     50.682
2.6.9-rc1-love1  Sun Sep  5 12:10:17 2004     50.93
2.6.9-rc1-nitro2 Sun Sep  5 16:55:52 2004     50.975
2.6.9-rc1-nitro1 Sat Sep  4 13:15:46 2004     51.344
2.6.9-rc1-nitro4 Fri Sep 10 21:12:18 2004     51.475
2.6.9-rc1-nitro1 Sat Sep  4 14:30:03 2004     51.507
2.6.9-rc1-nitro3 Tue Sep  7 20:55:08 2004     51.843
2.6.9-rc1-love2  Fri Sep 10 13:19:33 2004     51.941
2.6.9-rc1-nitro3 Mon Sep  6 12:52:07 2004     52.003
Back to top
View user's profile Send private message
sobers_2002
Veteran
Veteran


Joined: 16 Mar 2004
Posts: 1128

PostPosted: Sat Sep 11, 2004 6:20 am    Post subject: Reply with quote

i am having some problems compiling the new splashutils.....
Code:
http://forums.gentoo.org/viewtopic.php?p=1526553&sid=f94dccf6b53d8b42bd54f4ab5c3a33b1#1526553


has some1 had these problems with the new kernel?? ...... the earlier fbsplash is working just fine.
_________________
Pdict - dockable dictionary client for linux
FREE97WIN: Use this code on Dreamhost and you get $97 off !!
Back to top
View user's profile Send private message
glowwormy
n00b
n00b


Joined: 26 Apr 2003
Posts: 32

PostPosted: Sat Sep 11, 2004 7:14 am    Post subject: koutput broken Reply with quote

koutput is not working with this release. I got the following error:

HOSTCC arch/i386/boot/tools/build
cc1: Datei oder Verzeichnis nicht gefunden: Abhängigkeitsdatei »arch/i386/boot/tools/.build.d« wird geöffnet
make[2]: *** [arch/i386/boot/tools/build] Fehler 1
make[1]: *** [bzImage] Fehler 2
make: *** [_all] Fehler 2

But with this patch (found on the kernelmailinglist) it works:

--- scripts/Makefile.host.orig 2004-09-11 09:01:58.010053396 +0200
+++ scripts/Makefile.host 2004-09-11 09:03:20.130764008 +0200
@@ -73,6 +73,7 @@
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
+obj-dirs :=$(addprefix $(obj)/,$(obj-dirs))

#####
# Handle options to gcc. Support building with separate output directory
--- arch/i386/kernel/Makefile.orig 2004-09-11 08:57:56.634871624 +0200
+++ arch/i386/kernel/Makefile 2004-09-11 09:07:48.769205876 +0200
@@ -41,12 +41,15 @@
# Note: kbuild does not track this dependency due to usage of .incbin
$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall.lds

# The DSO images are built using a special linker script.
quiet_cmd_syscall = SYSCALL $@
cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \
-Wl,-T,$(filter-out FORCE,$^) -o $@

+export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
+
vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1
SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
Back to top
View user's profile Send private message
lxnay
Retired Dev
Retired Dev


Joined: 09 Apr 2004
Posts: 661
Location: Italy

PostPosted: Sat Sep 11, 2004 8:54 am    Post subject: Reply with quote

thx seppe, I'll try to add these nitros to the next Reiser4 LiveCD ;)
_________________
http://www.sabayon.org
Back to top
View user's profile Send private message
sibov
Tux's lil' helper
Tux's lil' helper


Joined: 09 Feb 2004
Posts: 147
Location: Germany

PostPosted: Sat Sep 11, 2004 11:23 am    Post subject: Reply with quote

my Power down is broken with nitro4 :cry:

Code:

dmesg |grep ACPI
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI interrupt 0000:03:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1, 8 throttling states)
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI interrupt 0000:03:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16

_________________
Gentoo 2.6.17-gentoo-r5 with dmraid Raid0 Dualboot
AMD64 X2 3800+, 4x512MB DDR PC3200Pro Corsair Geforce EN6600GT silencer @ 256MB
4x250GB SATAII Samsung SP120, Asus A8N Premium, Plextor PX712SA DVDRW
Logitech Dinovo, SB Audigy4
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page 1, 2, 3, 4, 5  Next
Page 1 of 5

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum