| View previous topic :: View next topic |
| Author |
Message |
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
 Posted: Tue Jul 20, 2004 11:47 am Post subject: Kernel >=2.6 (gentoo) hardware detection problem?? |
 |
|
| On one of my systems I experience the following behaviour. I have been compiling various 2.6.x kernels from gentoo-dev-sources. Whenever I use a kernel up to and including 2.6.5-gentoo-r1 everything is OK. For newer kernels my network interface fails to start, although of course the device is recognized and the driver is autoloaded (sis900). In what direction should I continue troubleshooting? I already copied the exact kernel configuration from 2.6.5-gentoo-r1 to 2.6.7-gentoo-r11. Earlier I also had USB keyboard detection problems but those have gone away now by using the above method. |
|
| Back to top |
|
 |
radonsg
Apprentice
Joined: 26 Jun 2004
Posts: 257
Location: Singapore
|
| Posted: Tue Jul 20, 2004 6:22 pm Post subject: |
|
|
What do u mean by failed to start? Can u elaborate on it? U mean using dhcp to get ip add but failed or what?
_________________
Athlon64 3000+ on a MSI Neo2 Platinum (nVidia nForce3)
1 Sata Hitachi (HGST) 7K250
1 Sata Samsung SpinPoint
2 x 512MB TwinMos DDR400 Dual Channel
Geforce 5200 |
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Tue Jul 20, 2004 6:36 pm Post subject: |
|
|
| radonsg wrote: | | What do u mean by failed to start? Can u elaborate on it? U mean using dhcp to get ip add but failed or what? |
OK I was a little brief. Obviously it is difficult to copy and paste the exact messages, but basically this is what happens.
I have configured a DHCP server on my network which is running perfectly. This particular client I have also configured for DHCP. Since it's an arch=~x86 implementaton I'm running the latest baselayout. This cannot be the problem since I have another almost identical machine where it does work.
When using a "good" kernel starting the ethernet interface with | Code: | | /etc/init.d/net.eth0 start |
simply returns with a "positive" statement containing my DHCP-assigned IP address. However with one of the "bad" kernels, the same operation times out after a minute or so, and no DHCP address is returned. Instead I get 2 exclamation marks at the end of a message line without any further info. |
|
| Back to top |
|
|
radonsg
Apprentice
Joined: 26 Jun 2004
Posts: 257
Location: Singapore
|
| Posted: Tue Jul 20, 2004 7:35 pm Post subject: |
|
|
wat does your /var/log/messages shows on the dhcp start up error? Come across ppl with similar prob as u, turns out to be NIC and USB controller were set to using the same IRQ.
https://forums.gentoo.org/viewtopic.php?t=194020&highlight=dhcp+failed
_________________
Athlon64 3000+ on a MSI Neo2 Platinum (nVidia nForce3)
1 Sata Hitachi (HGST) 7K250
1 Sata Samsung SpinPoint
2 x 512MB TwinMos DDR400 Dual Channel
Geforce 5200 |
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Tue Jul 20, 2004 8:07 pm Post subject: |
|
|
OK I discovered NETDEV watchdog errors similar to the post you refer to. However, the weird thing is that it does work for 2.6.5, so something must've changed... I may have to report a bug if I don't find it soon.
Disabling USB as the post suggests is not an option for me, although indeed IRQ10 is a bit overloaded. It's funny but I do have an APIC and it doesn't show up in | Code: | | cat /proc/interrupts |
although the kernel has enabled the APIC (as dmesg proves). Still I suspect an APIC/ACPI issue, especially since ohci_hcd complains about an "Unlink after no-IRQ" issue...
I'll keep investigating. |
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Tue Jul 20, 2004 8:12 pm Post subject: |
|
|
| Aha! With a good kernel interrupt settings are different from the bad kernel, and I now notice that IRQ9 is used by an acpi module (as it should!). Also, ohci_hcd moved to IRQ9 as well. I still suspect ACPI/APIC! |
|
| Back to top |
|
|
radonsg
Apprentice
Joined: 26 Jun 2004
Posts: 257
Location: Singapore
|
| Posted: Tue Jul 20, 2004 8:32 pm Post subject: |
|
|
well it seems to me that ACPI/APIC still not really that stable yet. There's lots of prob with them, hope it will sort of be more mature soon.
_________________
Athlon64 3000+ on a MSI Neo2 Platinum (nVidia nForce3)
1 Sata Hitachi (HGST) 7K250
1 Sata Samsung SpinPoint
2 x 512MB TwinMos DDR400 Dual Channel
Geforce 5200 |
|
| Back to top |
|
|
Helena
Veteran
Joined: 02 Apr 2003
Posts: 1114
Location: Den Dolder, The Netherlands
|
| Posted: Wed Jul 21, 2004 10:00 am Post subject: |
|
|
Some more info, if only for the record. Output from a "good" kernel: | Code: | AmpersandGentoo root # dmesg
Linux version 2.6.5-gentoo-r1 (root@AmpersandGentoo) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Tue Jul 20 22:37:52 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262140
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32764 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f5810
ACPI: RSDT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
ACPI: FADT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc0c0
ACPI: BOOT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
ACPI: MADT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
ACPI: DSDT (v001 ASUS P4S8X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Built 1 zonelists
Kernel command line: root=/dev/hda8 vga=795
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2400.361 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 1032736k/1048560k available (2982k kernel code, 14912k reserved, 1095k data, 196k init, 131056k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4734.97 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2399.0446 MHz.
..... host bus clock speed is 133.0302 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf11b0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
irda_init()
NET: Registered protocol family 23
vesafb: framebuffer at 0xf0000000, mapped to 0xf8809000, size 16384k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at c000:e4c0
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
ikconfig 0.7 with /proc/config*
highmem bounce pool size: 64 pages
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.6 [Flags: R/O].
udf: registering filesystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Console: switching to colour frame buffer device 160x64
Real Time Clock Driver v1.12
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
pnp: the driver 'parport_pc' has been registered
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 33073H4, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive
hdd: PHILIPS CDD6911, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 60030432 sectors (30735 MB) w/512KiB Cache, CHS=59554/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
libata version 1.02 loaded.
sata_promise version 0.91
ata1: SATA max UDMA/133 cmd 0xF980E200 ctl 0xF980E238 bmdma 0x0 irq 11
ata2: SATA max UDMA/133 cmd 0xF980E280 ctl 0xF980E2B8 bmdma 0x0 irq 11
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 320173056 sectors (lba48)
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
ata2: dev 0 ATA, max UDMA/133, 320173056 sectors (lba48)
ata2: dev 0 configured for UDMA/133
scsi1 : sata_promise
Vendor: ATA Model: Maxtor 6Y160M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 6Y160M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
PCI: Enabling device 0000:00:03.3 (0004 -> 0006)
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 10, pci mem f9810000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 9, pci mem f9812000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:03.1: irq 9, pci mem f9814000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
ohci_hcd 0000:00:03.2: irq 9, pci mem f9816000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.2
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
PCI: Enabling device 0000:00:02.7 (0004 -> 0005)
usb 1-2: new high speed USB device using address 2
intel8x0_measure_ac97_clock: measured 49322 usecs
intel8x0: clocking to 48000
ALSA sound/pci/intel8x0.c:2831: joystick(s) found
ALSA device list:
#0: SiS SI7012 at 0xa400, irq 10
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
irlan_init()
IrCOMM protocol (Dag Brattli)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 196k freed
Adding 658628k swap on /dev/hda7. Priority:-1 extents:1
EXT3 FS on hda8, internal journal
usb 1-2: control timeout on ep0out
ehci_hcd 0000:00:03.3: Unlink after no-IRQ? Different ACPI or APIC settings may help.
sis900.c: v1.08.07 11/02/2003
PCI: Enabling device 0000:00:04.0 (0004 -> 0007)
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 11, 00:e0:18:9d:76:fd.
usb 1-2: control timeout on ep0out
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: device not accepting address 2, error -110
NTFS volume version 3.1.
usb 1-2: new high speed USB device using address 3
usb 1-2: control timeout on ep0out
usb 1-2: control timeout on ep0out
usb 1-2: device not accepting address 3, error -110
usb 2-1: new full speed USB device using address 2
usb 4-1: new low speed USB device using address 2
drivers/usb/input/hid-core.c: ctrl urb status -2 received
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB HID v1.00 Mouse [Logitech Inc. iFeel MouseMan] on usb-0000:00:03.2-1
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1017
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
Linux agpgart interface v0.100 (c) Dave Jones
0: NVRM: AGPGART: unable to retrieve symbol table
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
AmpersandGentoo root # cat /proc/interrupts
CPU0
0: 803689 XT-PIC timer
1: 183 XT-PIC i8042
2: 0 XT-PIC cascade
8: 2 XT-PIC rtc
9: 2962 XT-PIC acpi, ohci_hcd, ohci_hcd, ohci_hcd
10: 0 XT-PIC ehci_hcd, SiS SI7012
11: 20936 XT-PIC libata, eth0, nvidia
12: 58 XT-PIC i8042
14: 87338 XT-PIC ide0
15: 44 XT-PIC ide1
NMI: 0
LOC: 803445
ERR: 0
AmpersandGentoo root # |
For a "bad" kernel, I recorded the following interrupt settings: | Code: | CPU0
0: 81749 XT-PIC timer
1: 135 XT-PIC i8042
2: 0 XT-PIC cascade
8: 2 XT-PIC rtc
9: 0 XT-PIC acpi
10: 0 XT-PIC ohci_hcd, ohci_hcd, SiS SI7012, eth0
11: 14 XT-PIC libata, ehci_hcd, ohci_hcd
14: 2454 XT-PIC ide0
15: 44 XT-PIC ide1
NMI: 0
LOC: 81652
ERR: 0
|
The nvidia module hadn't been loaded yet. The differences are in IRQ9 and IRQ10 (the extra usage of IRQ12 doesn't seem relevant to me). Also, I had the following dmesg output: | Code: | Linux version 2.6.7 (root@AmpersandGentoo) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Tue Jul 20 21:53:49 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262140
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32764 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f5810
ACPI: RSDT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
ACPI: FADT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc0c0
ACPI: BOOT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
ACPI: MADT (v001 ASUS P4S8X 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
ACPI: DSDT (v001 ASUS P4S8X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Built 1 zonelists
Kernel command line: root=/dev/hda8 vga=795
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2400.495 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 1034740k/1048560k available (2973k kernel code, 12908k reserved, 1132k data, 192k init, 131056k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4734.97 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2399.0442 MHz.
..... host bus clock speed is 133.0302 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf11b0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
irda_init()
NET: Registered protocol family 23
vesafb: framebuffer at 0xf0000000, mapped to 0xf8809000, size 10240k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at c000:e4c0
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
highmem bounce pool size: 64 pages
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.14 [Flags: R/O].
udf: registering filesystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Console: switching to colour frame buffer device 160x64
Real Time Clock Driver v1.12
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
pnp: the driver 'parport_pc' has been registered
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 33073H4, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive
hdd: PHILIPS CDD6911, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 60030432 sectors (30735 MB) w/512KiB Cache, CHS=59554/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
libata version 1.02 loaded.
sata_promise version 1.00
ata1: SATA max UDMA/133 cmd 0xF920E200 ctl 0xF920E238 bmdma 0x0 irq 11
ata2: SATA max UDMA/133 cmd 0xF920E280 ctl 0xF920E2B8 bmdma 0x0 irq 11
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
ata2: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_promise
Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target0/lun0: unknown partition table
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
PCI: Enabling device 0000:00:03.3 (0004 -> 0006)
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 11, pci mem f9210000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 10, pci mem f9212000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:03.1: irq 11, pci mem f9214000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
ohci_hcd 0000:00:03.2: irq 10, pci mem f9216000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.2
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
PCI: Enabling device 0000:00:02.7 (0004 -> 0005)
intel8x0_measure_ac97_clock: measured 49306 usecs
intel8x0: clocking to 48000
usb 1-2: new high speed USB device using address 2
ALSA sound/pci/intel8x0.c:2822: joystick(s) found
ALSA device list:
#0: SiS SI7012 at 0xa400, irq 10
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
IrCOMM protocol (Dag Brattli)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 192k freed
usb 2-1: new full speed USB device using address 2
Adding 658628k swap on /dev/hda7. Priority:-1 extents:1
EXT3 FS on hda8, internal journal
usb 2-1: control timeout on ep0out
ohci_hcd 0000:00:03.0: Unlink after no-IRQ? Different ACPI or APIC settings may help.
sis900.c: v1.08.07 11/02/2003
PCI: Enabling device 0000:00:04.0 (0004 -> 0007)
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 10, 00:e0:18:9d:76:fd.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS volume version 3.1.
eth0: Media Link On 100mbps full-duplex
eth0: no IPv6 routers present
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000240
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000249
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000240
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000240
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000249
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000240
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000240
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000249
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000249
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000249
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000249
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000004 00000249
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status 00000000 00000259
|
|
|
| Back to top |
|
|
uglyman
Apprentice
Joined: 21 Apr 2002
Posts: 216
Location: Seattle, WA USA
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
