View previous topic :: View next topic |
Author |
Message |
mmartin n00b
Joined: 08 Nov 2002 Posts: 45
|
Posted: Fri Nov 08, 2002 10:47 pm Post subject: How do I identify which modules I need to load? |
|
|
Hello,
I'm quite new to Linux and was wondering if there is any way to identify my Hardware (during the Gentoo installation), so that I know which modules I need to load?
thx
martin
Edit:
Sure I could just look inside my machine but I'm wondering about the Possibilities |
|
Back to top |
|
|
ebrostig Bodhisattva
Joined: 20 Jul 2002 Posts: 3152 Location: Orlando, Fl
|
Posted: Fri Nov 08, 2002 11:11 pm Post subject: Re: How do I identify which modules I need to load? |
|
|
mmartin wrote: | Hello,
I'm quite new to Linux and was wondering if there is any way to identify my Hardware (during the Gentoo installation), so that I know which modules I need to load?
thx
martin
Edit:
Sure I could just look inside my machine but I'm wondering about the Possibilities |
Well.... You can always try to look at the info from proc:
cat /proc/pci
This will show all the devices attached to your pci bus.
It is not an easy task to do automagically, to identify hardware and then load modules.
Erik |
|
Back to top |
|
|
mooman Apprentice
Joined: 06 Nov 2002 Posts: 175 Location: Vancouver, WA
|
Posted: Sat Nov 09, 2002 1:47 am Post subject: |
|
|
There are great utilities to do this, but they usually need a working OS first.
One example is SiSoft's Sandra (http://www.sisoftware.co.uk/index.php?location=sware) which works under most Windows flavors.
I'm sure someone around here could suggest a similar benchmarking/diagnostic tool for Linux.... _________________ Linux user off and on since circa 1995 |
|
Back to top |
|
|
mmartin n00b
Joined: 08 Nov 2002 Posts: 45
|
Posted: Sat Nov 09, 2002 11:44 am Post subject: |
|
|
At the moment I'm running on dual boot with SuSE80 and WinXP, I found out that people that need a pptp connection had problems to connect to the net. So I'll try to intall throu chroot. Only problem: I don't know much about modules, for example I got some Realtec Network Card that is supported under Linux but I'm trying to install without opening my pc
so I'd need some ressource that tells me what modules I can use for what hardware _________________ thxMartin
Man honest. Will do everything.
Tired of cleaning yourself? - Let me do it.
Eat a frog in the morning and nothing worse will happen to you that day |
|
Back to top |
|
|
lx Veteran
Joined: 28 May 2002 Posts: 1012 Location: Netherlands
|
Posted: Sat Nov 09, 2002 12:12 pm Post subject: |
|
|
If you already have a running linux distro, you can normally check what modules are running by doing cat /proc/modules.
Cya lX. _________________ "Remember there's a big difference between kneeling down and bending over.", Frank Zappa |
|
Back to top |
|
|
Lasitus Apprentice
Joined: 05 Oct 2002 Posts: 188 Location: Orlando, FL
|
Posted: Sat Nov 09, 2002 5:00 pm Post subject: |
|
|
Is it an old Linksys?
dc21x4x DECchip Tulip
RTL-8139
are common ones for D-Link and Linksys cards
I thought mine was a realtek chip, but the RTL-8139 was not working. The DECchip Tulip worked like a charm though. I assume you are configuring your kernel... The live CD kernel included my NIC. The way I found out what mine was by compiling all NICs in and taking out the ones I didn't think were mine and rebooting and seeing if it still worked. |
|
Back to top |
|
|
lx Veteran
Joined: 28 May 2002 Posts: 1012 Location: Netherlands
|
Posted: Sat Nov 09, 2002 5:37 pm Post subject: |
|
|
Lasitus wrote: | The way I found out what mine was by compiling all NICs in and taking out the ones I didn't think were mine and rebooting and seeing if it still worked. |
Maybe you should have compiled them as modules and do modprobe for everyone, seems a lot easier then rebooting every time.
Cya lX. _________________ "Remember there's a big difference between kneeling down and bending over.", Frank Zappa |
|
Back to top |
|
|
Lasitus Apprentice
Joined: 05 Oct 2002 Posts: 188 Location: Orlando, FL
|
Posted: Sun Nov 10, 2002 12:48 am Post subject: |
|
|
true true... I wanted them in my kernel and did it the hard way... oh well. Only took like 3 reboots though |
|
Back to top |
|
|
|