APC Backup ES 500 (SOLVED)

Mythos · l33t Joined: 02 May 2004 Posts: 953 Location: Portugal

bom gostava de saber como e que ponho o Battery Charger Monitor a funcionar.
tenho uma APC Backup ES 500 :

Kernel:

hiddev96: USB HID v1.00 Device [American Power Conversion Back-UPS ES/CyberFort
500 FW: 4.1.I U] on usb-0000:00:10.2-1

dmesg |grep acpi -i
pci_irq-0316 [13] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
pci_irq-0316 [12] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
ACPI: (supports S0 S1 S4 S5)

Alguém já pos uma UPS igual a esta a dar no Battery Charger Monitor

Abraços.

meetra · Posted: Wed Jun 02, 2004 3:27 am Post subject:

http://www.inetcosmos.org/pipermail/apcupsd-devel/2002-February/003082.html

espero ke te ajude

Mythos · l33t Joined: 02 May 2004 Posts: 953 Location: Portugal

APC : 001,026,0678
DATE : Thu Jun 03 01:41:28 WEST 2004
HOSTNAME : zzzzzzzz
RELEASE : 3.10.10
VERSION : 3.10.10 (16 January 2004) gentoo
UPSNAME : kwisatz
CABLE : USB Cable
MODEL : Back-UPS ES/CyberFort 500 FW: 4.1.I USB FW: d1
UPSMODE : Stand Alone
STARTTIME: Thu Jun 03 00:50:27 WEST 2004
STATUS : ONLINE
BCHARGE : 100.0 Percent
TIMELEFT : 8.0 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
NUMXFERS : 0
TONBATT : 0 seconds
CUMONBATT: 0 seconds
XOFFBATT : N/A
STATFLAG : 0x02000008 Status Flag
MANDATE : 2002-05-30
SERIALNO : AB0218240760
BATTDATE : 2002-05-30
NOMBATTV : 12.0
APCMODEL : Back-UPS ES/CyberFo
END APC : Thu Jun 03 01:41:45 WEST 2004

Oki já tenho isto a funcionar, Obrigado