View previous topic :: View next topic |
Author |
Message |
stonent Veteran
Joined: 07 Aug 2003 Posts: 1139 Location: Texas
|
Posted: Thu Apr 29, 2004 9:30 am Post subject: 2004.1 Sparc64 LiveCD Panic |
|
|
I'm getting the old VFS unable to mount root error when booting from the 2004.1 CD. What Sparc64 systems booted from it?
It sees my hardware as it is booting. It grabs the CMD IDE controller, sees the DVD drive and the hard drive. The HD is on /dev/hda and the dvd drive is on /dev/hdc
I'm trying to repair a bad silo so I needed something to start it from. _________________ Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism.
Last edited by stonent on Thu May 06, 2004 4:53 pm; edited 1 time in total |
|
Back to top |
|
|
stonent Veteran
Joined: 07 Aug 2003 Posts: 1139 Location: Texas
|
Posted: Thu Apr 29, 2004 7:00 pm Post subject: |
|
|
Code: | UltraAXe(UltraSPARC-IIi 300MHz), No Keyboard
OpenBoot 3.14.1 ME , 256 MB memory installed, Serial #16280317.
Ethernet address 8:0:20:f8:6a:fd, Host ID: 80f86afd.
ok boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:
SILO Version 1.4.4
\
-- Welcome to Gentoo SPARC Linux --
-- Version 2004.1 --
boot: gentoo-2.4
Allocated 8 Megs of memory at 0x40000000 for kernel
\
Loaded kernel version 2.4.25
Loading initial ramdisk (943758 bytes at 0x40C00000)...
|
Remapping the kernel... done.
Booting Linux...
PROMLIB: Sun IEEE Boot Prom 3.14.1 2000/05/02 14:33
Linux version 2.4.25-sparc-r1 (root@ayanami) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3)) #1 Mon Apr 19 17:51:11 UTC 2004
ARCH: SUN4U
Ethernet address: 08:00:20:f8:6a:fd
initrd extends beyond end of memory (0x0000000020ce668e > 0x000000001feb4000)
disabling initrd
On node 0 totalpages: 32149
zone(0): 32602 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f008074c,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zisofs cdroot
Calibrating delay loop... 599.65 BogoMIPS
Memory: 254072k available (2096k kernel code, 552k data, 168k init) [fffff80000000000,000000001feb4000]
Dentry cache hash table entries: 32768 (order: 6, 524288 bytes)
Inode cache hash table entries: 16384 (order: 5, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 8192 (order: 3, 65536 bytes)
Page-cache hash table entries: 32768 (order: 5, 262144 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI0(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[21]
PCI-IRQ: Routing bus[ 1] slot[ 3] map[0] to INO[20]
PCI0(PBMB): Bus running at 33MHz
ebus0: [eeprom] [flashprom] [su] [su] [se] [ecpp] [power] [watchdog] [beeper] [auxio] [SUNW,pll] [SUNW,CS4231] [i2c -> (gpio) (adc)] [fdthree]
PCIO serial driver version 1.54
su(serial) at 0x1fff13803f8 (tty 0 irq 10,7dc) is a 16550A
su(serial) at 0x1fff13602f8 (tty 1 irq 10,7dd) is a 16550A
SAB82532 serial driver version 1.65
devfs_register(tts/0): could not append to parent, err: -17
devfs_register(tts/1): could not append to parent, err: -17
devfs_register(cua/0): could not append to parent, err: -17
devfs_register(cua/1): could not append to parent, err: -17
ttyS02 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS03 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
power: Control reg at 000001fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
sunhme.c:v2.01 26/Mar/2002 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:f8:6a:fd
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD646: IDE controller at PCI slot 01:03.0
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio,
ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio,
hda: WDC AC420400D, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: BDV 108A DVDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0000e on irq 4,7e0 (shared with ide0)
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39876480 sectors (20417 MB) w/1966KiB Cache, CHS=39560/16/63, (U)DMA
hdc: attached ide-cdrom driver.
hdc: ATAPI DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 p7 p8
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
d7s: unable to locate device
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Kernel panic: VFS: Unable to mount root fs on 01:00
Press L1-A to return to the boot prom |
_________________ Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism.
Last edited by stonent on Sun May 02, 2004 7:54 pm; edited 2 times in total |
|
Back to top |
|
|
JFK n00b
Joined: 19 Jan 2004 Posts: 21
|
Posted: Sun May 02, 2004 4:16 pm Post subject: |
|
|
I have exactly the same problem with an Ultra 10.
Is there a workaround or some thing else for this problem? |
|
Back to top |
|
|
hambone088 n00b
Joined: 02 May 2004 Posts: 3
|
Posted: Sun May 02, 2004 5:43 pm Post subject: |
|
|
I too have the same issue on my Ultra 10....did you ever get an explanation or answer?
thanks,
-jeff |
|
Back to top |
|
|
JFK n00b
Joined: 19 Jan 2004 Posts: 21
|
Posted: Sun May 02, 2004 6:40 pm Post subject: |
|
|
No I have unfortunately no explanation or answer to this issue.... |
|
Back to top |
|
|
stonent Veteran
Joined: 07 Aug 2003 Posts: 1139 Location: Texas
|
Posted: Sun May 02, 2004 8:01 pm Post subject: |
|
|
If anyone else here has access to a serial null modem cable, can they post the dmesg output from their Ultra 10? (Or other failing system) _________________ Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism.
Last edited by stonent on Sun May 02, 2004 11:22 pm; edited 1 time in total |
|
Back to top |
|
|
hambone088 n00b
Joined: 02 May 2004 Posts: 3
|
Posted: Sun May 02, 2004 11:10 pm Post subject: |
|
|
I know the original post was regarding 2004.1 CD and I still have the same problem noted earlier.
Just to see....downloaded the minimal 2004.0 iso and was able to boot no problem.
If I find my null modem cable, I will send the dmesg output. |
|
Back to top |
|
|
novasoy n00b
Joined: 30 Apr 2004 Posts: 18 Location: Louisville, KY
|
Posted: Mon May 03, 2004 11:38 am Post subject: Possible fix |
|
|
hambone088 wrote: | I too have the same issue on my Ultra 10....did you ever get an explanation or answer?
thanks,
-jeff |
I was able to have some luck getting rid of a kernel panic problem by running the OBP diagnostic tests (OBDiag). Running those cleared out whatever was causing the fault and the kernel panic went away immediately. I believe the command at the OK prompt was "test all". Then afterward, I did a "reset-all". That seemed to do the trick. YMMV. _________________ Bookcrossing rocks
Last edited by novasoy on Tue May 04, 2004 5:58 pm; edited 1 time in total |
|
Back to top |
|
|
hambone088 n00b
Joined: 02 May 2004 Posts: 3
|
Posted: Tue May 04, 2004 12:56 pm Post subject: |
|
|
I tried the test-all (passed with no errors) and then reset-all....unfortunately same result.
thanks,
-jeff |
|
Back to top |
|
|
JFK n00b
Joined: 19 Jan 2004 Posts: 21
|
Posted: Tue May 04, 2004 5:10 pm Post subject: |
|
|
same to me...
same Kernel panic... |
|
Back to top |
|
|
stonent Veteran
Joined: 07 Aug 2003 Posts: 1139 Location: Texas
|
Posted: Thu May 06, 2004 3:07 am Post subject: |
|
|
They're going to need some dmesgs. Connect a serial cable and copy the kernel output and paste it in here. _________________ Inspiron 4100 & Sun UltraAXe
Portage on Solaris|Dell Laptop Hacks
The way you feel about organized religion is the same way I feel about organized socialism. |
|
Back to top |
|
|
digiwacked n00b
Joined: 06 May 2004 Posts: 1 Location: Salt Lake City, Utah
|
Posted: Thu May 06, 2004 4:07 pm Post subject: |
|
|
I'm having the same problem on an Ultra 5.
It boots fine with the LiveCD 2004.0.
Here's what's on my screen after I try to boot from the LiveCD 2004.1
atyfb: 3D RAGE (GT) [0x4754 rev 0x9a] 2M SGRAM, 14.31818 MHz XTAL, 200 MHz PLL, 67 MHz MCLK, 67 MHz XCLK
Console: switching to colour frame buffer device 160x64
fb0: ATY Mach64 frame buffer device on PCI
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initializeed: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
sunhme.c:v2.01 26/Mar/2002 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:28:93:c3:ea
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes: override with idebus=xx
CMD646: IDE controller at PCI slot 01:03.0
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio
hda: ST34342A, ATA DISK drive
ide: Assuming 33 MHz system bus speed for PIO modes; override with idebus=xx
hdc: CRD-8240B, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02c00000-0x1fe02c0000a on irq 4,7e0
ide1 at 0x1fe02c00010-0x1fe02c0001a on irq 4,7e0 (shared with ide0)
hda: attached ide-disk driver
hda: irq timeout: status=0xd1 ( Busy )
hda: 8404830 sectors (4303 MB), CHS=8894/15/63, (U)DMA
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0:hda: status timeout: status=0xd1 ( Busy )
hda: DMA disabled
hda: drive not ready for command
ide0: reset: success
p1 p2 p3 p4
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
d7s: unable to locate device
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.0.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Kernel panic: VFS: Unable to mount root fs on 01:00
Press L1-A to return to the boot prom |
|
Back to top |
|
|
stonent Veteran
Joined: 07 Aug 2003 Posts: 1139 Location: Texas
|
|
Back to top |
|
|
jbwillia Tux's lil' helper
Joined: 07 May 2004 Posts: 108 Location: TN, USA
|
Posted: Fri May 07, 2004 10:01 am Post subject: same on an ultra 60 |
|
|
I am having the exact same problem on an Ultra 60. |
|
Back to top |
|
|
jbwillia Tux's lil' helper
Joined: 07 May 2004 Posts: 108 Location: TN, USA
|
Posted: Fri May 07, 2004 12:29 pm Post subject: |
|
|
2004.0 also worked for me. This is my first install of Gentoo ( I'm switching from Debian), so I'm going to run with it. However, I'll test any new fixes to verify it on my machine. |
|
Back to top |
|
|
JFK n00b
Joined: 19 Jan 2004 Posts: 21
|
Posted: Fri May 07, 2004 12:47 pm Post subject: |
|
|
Here is the kernel output of my Ultra 10....
Code: |
Linux version 2.4.25-sparc-r1 (root@ayanami) (gcc version 3.3.3 20040217 (Gentoo
Linux 3.3.3)) #1 Mon Apr 19 17:51:11 UTC 2004
ARCH: SUN4U
Ethernet address: 08:00:20:b5:ef:07
initrd extends beyond end of memory (0x0000000020ce668e > 0x0000000017f36000)
disabling initrd
On node 0 totalpages: 15831
zone(0): 16283 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f006d418,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zisofs c
droot
Calibrating delay loop... 878.18 BogoMIPS
Memory: 125072k available (2096k kernel code, 552k data, 168k init) [fffff800000
00000,0000000017f36000]
Dentry cache hash table entries: 16384 (order: 5, 262144 bytes)
Inode cache hash table entries: 8192 (order: 4, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 1024 (order: 0, 8192 bytes)
Page-cache hash table entries: 16384 (order: 4, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI0(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[21]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 3] map[0] to INO[20]
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flas
hprom] [SUNW,CS4231]
PCIO serial driver version 1.54
su(mouse) at 0x1fff13062f8 (irq = 4,7ea) is a 16550A
Sun Mouse-Systems mouse driver version 1.00
su(kbd) at 0x1fff13083f8 (irq = 9,7e9) is a 16550A
keyboard: not present
SAB82532 serial driver version 1.65
ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
power: Control reg at 000001fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
sunhme.c:v2.01 26/Mar/2002 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:b5:ef:07
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD646: IDE controller at PCI slot 01:03.0
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio
hda: ST39140A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared with ide0
)
hda: attached ide-disk driver.
hda: 17803440 sectors (9115 MB) w/448KiB Cache, CHS=17662/16/63, (U)DMA
hdc: attached ide-cdrom driver.
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
d7s: unable to locate device
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Kernel panic: VFS: Unable to mount root fs on 01:00
Press L1-A to return to the boot prom |
|
|
Back to top |
|
|
gust4voz Retired Dev
Joined: 09 Sep 2003 Posts: 373 Location: Buenos Aires, Argentina
|
Posted: Thu May 13, 2004 2:25 am Post subject: |
|
|
For users having problems, can you try the ISOs at http://dev.gentoo.org/~gustavoz/sparc/ ?
This are exactly the same as the released 2004.1 ones, with the exception that they're based on an older SILO version.
Post your success/failure stories in Bug #50256.
Thanks. _________________ Gustavo Zacarias
Gentoo/SPARC monkey |
|
Back to top |
|
|
jtessier72 n00b
Joined: 29 Jul 2004 Posts: 1
|
Posted: Thu Jul 29, 2004 12:31 pm Post subject: fwiw another dmesg |
|
|
Quote: | boot: gentoo-2.4
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.4.25
Loading initial ramdisk (943758 bytes at 0x40C00000)...
|
Remapping the kernel... done.
Booting Linux...
PROMLIB: Sun IEEE Boot Prom 3.15.2 1998/11/10 10:35
Linux version 2.4.25-sparc-r1 (root@ayanami) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3)) #1 Mon Apr 19 17:51:11 UTC 2
004
ARCH: SUN4U
Ethernet address: 08:00:20:a2:0d:e8
initrd extends beyond end of memory (0x0000000020ce668e > 0x0000000017f36000)
disabling initrd
On node 0 totalpages: 15831
zone(0): 16283 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f006d088,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zisofs cdroot
Calibrating delay loop... 665.19 BogoMIPS
Memory: 125072k available (2096k kernel code, 552k data, 168k init) [fffff80000000000,0000000017f36000]
Dentry cache hash table entries: 16384 (order: 5, 262144 bytes)
Inode cache hash table entries: 8192 (order: 4, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 1024 (order: 0, 8192 bytes)
Page-cache hash table entries: 16384 (order: 4, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI0(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[21]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 3] map[0] to INO[20]
PCI0(PBMB): Bus running at 33MHz
ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,CS4231]
PCIO serial driver version 1.54
su(mouse) at 0x1fff13062f8 (irq = 4,7ea) is a 16550A
Sun Mouse-Systems mouse driver version 1.00
su(kbd) at 0x1fff13083f8 (irq = 9,7e9) is a 16550A
keyboard: not present
SAB82532 serial driver version 1.65
ttyS00 at 0x1fff1400000 (irq = 12,7eb) is a SAB82532 V3.2
ttyS01 at 0x1fff1400040 (irq = 12,7eb) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
power: Control reg at 000001fff1724000 ... powerd running.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blax 8 devices)
sunhme.c:v2.01 26/Mar/2002 David S. Miller (davem@redhat.com)
eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:a2:0d:e8
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD646: IDE controller at PCI slot 01:03.0
CMD646: chipset revision 3
CMD646: chipset revision 0x03, MultiWord DMA Force Limited
CMD646: 100% native mode on irq 4,7e0
ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio
hda: ST39140A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared with ide0)
hda: attached ide-disk driver.
hda: 17803440 sectors (9115 MB) w/448KiB Cache, CHS=17662/16/63, (U)DMA
hdc: attached ide-cdrom driver.
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
d7s: unable to locate device
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Kernel panic: VFS: Unable to mount root fs on 01:00
Press L1-A to return to the boot prom |
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|