| View previous topic :: View next topic |
| Author |
Message |
shimitar
Guru
Joined: 23 Nov 2003
Posts: 320
Location: Italy, Torino
|
 Posted: Sat May 01, 2004 8:39 pm Post subject: Device support for SPARC: one more to add |
 |
|
Hallo!
i am using successfully (a few weeks for now) a SIL680 PCI IDE UDMA5 controller on a sparc based machine.
Machine: ULTRA5 @ 270mhz, PCI based
lspci output of the ide controller:
0000:02:03.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 02)
I have TWO Maxtor 80gb drives attached to it (both master devices) and they works flawlessy at UDMA133 with no data corruption. My system is currently running on them....
I am NOT using the software raid of the controller. The performances are a few times better than using the uriginal Ultra5 IDE controller and the CPU usage is minimum (as expected).
So, is there an official gentoo sparc list of supported devices? if so, can this be added?
bye!
[/u]
_________________
Willy Gardiol
willy@gardiol.org |
|
| Back to top |
|
 |
itson
n00b
Joined: 16 Feb 2004
Posts: 46
|
| Posted: Fri Aug 06, 2004 11:41 pm Post subject: |
|
|
howed you get it working???
i just bought it, and hooked it up, it said this in dmesg
| Code: | SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 |
i did cat /proc/pci
and i found this.
| Code: |
Bus 0, device 9, function 0:
RAID bus controller: CMD Technology Inc PCI0680 (rev 2).
IRQ 10.
Master Capable. Latency=32.
I/O at 0xec00 [0xec07].
I/O at 0xe800 [0xe803].
I/O at 0xe400 [0xe407].
I/O at 0xe000 [0xe003].
I/O at 0xdc00 [0xdc0f].
Non-prefetchable 32 bit memory at 0xdfffff00 [0xdfffffff]. Bus 0, device 16, function 2:
|
.. help.. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on Sparc
