That did the trick! Thank you very much. Wonder what happened between the first time I installed it (probably a year ago) and now...

EDIT: I grabbed 1.27b source, which also builds fine at this time (and works a lot better).

Thank you for the help. The requested info is as follows:

# qlist fltk | grep -v '\.h$' | sort
/etc/env.d/99fltk
/usr/bin/fltk-config
/usr/bin/fluid
/usr/include/fltk/Fl
/usr/include/fltk/FL/Enumerations.H
/usr/include/fltk/FL/filename.H
/usr/include/fltk/FL/Fl_Adjuster.H
/usr/include/fltk/FL/fl ...

The subject sums it up nicely.

I installed it earlier on another PC with very nearly identical configuration, and it worked, so gotta narrow down what's different in this case.

EDIT: What's funny is I apparently already had it installed and was trying to rebuild it. Oops. Nevertheless, it seems ...

UPDATE:
So I finally noticed lighttpd was only listening on ipv6....Can't make this up...Actually pasted the answer to part of my problem in the question :x

Solution for lighttpd: In /etc/lighttpd/lighttpd.conf I changed server.use-ipv6 to disable, and restarted lighttpd. It is now serving up an ...

Greetings,
Just bought an RTL-SDR.com device to feed ADS-B data to some projects.

At first, I ran dump1090 --net, but the web interface was MIA. Using netstat, I did not see where anything was listening on port 8080. I noticed in /usr/share/dump1090, there is a lighttpd.conf file as well as an html ...

I've decided to just rebuild with the qt5 use flag for the launcher. I imagine in 2020 that's what most people would do anyway. Everything seems to be working now. Thanks for the help!!

nick_gentoo - Thanks for the tip about the launcher. If I can't figure anything else out, I'll rebuild it with that.

I did look over the man page and all, but obviously was not able to figure anything out :(

AJM - I do not seem to have an fgfsrc file anywhere, so I'll look that up and see if it ...

Good day,

Seems no matter what I try, drawing from the Gentoo wiki and other sources, Flightgear will not find and/or load any downloaded aircraft. Flightgear was installed from the official Gentoo repository. I've lost the plot after a few nights of trying, so here are some initial data points ...

Thank you very much for the reply. I just got home and popped into my router for a look-see, and I noticed the security mode was set to WPA/WPA2 Personal, however I'm pretty certain it used to be on WPA2 Personal only, so I switched it over and voilà!

I don't remember changing it myself, nor do I ...

Good day,

Figured I'd post here while I gather more info in case anybody has heard of this before. So far haven't been able to dig up any related cases from the net. At this point, I suspect something is wrong w/ my wifi router and I should try factory resetting it. However, I've done that several ...

Hi all,

I recently purchased a Pfsense firewall (Netgate SG-1100), and have it set mostly at default values, which all seemed sane for my use case (maybe some things I missed or didn't understand, so advice is deeply appreciated). I've test driven Suricata, and it works fine on my device, but I'm ...

Thank you for the clarification. I didn't have any expectations about genkernel using CWD, but rather expected it would use /usr/src/linux/.config by default (well, before this I didn't even realize it needed the config for this). Seems like a perfectly reasonable assumption to me. Basically the ...

So this is a documented recent change in Genkernel? I can't stress enough how routine this is (or rather should have been) for me, and always have used the same exact commands. It seems silly for Genkernel to suddenly not use /usr/src/linux/.config by default, when no config is specified. I will ...

Thanks for the reply! Was able to borrow a USB drive, so here is some more infos...

Here is a pic showing the kernel panic:
https://meaninglessinfo.com/IMG_20200922_220204977.jpg

These are the commands I use to rebuild the kernel each time:

kergen -u
mount /boot
cd /usr/src/linux
make && make ...

UPDATE: Yeah, I'm stuck on this one. Have replied with more information....When I made this post, I couldn't find a USB drive to boot the machine, so took a chance in posting while I sorted that, thinking maybe there was a change in genkernel, grub, or something else that I was overlooking. That's ...

Thank you very much...that pretty much clears everything up for me!

Yes, I was def. talking about "transparent encryption" for main memory - wasn't aware of the terminology. I mainly had meltdown and spectre exploits in mind when I brought it up (not sure if there are others atm). Wondered if ...

This is a bit of a different question and not sure where to put it. I'm guessing here, or in Off the Wall....?

Backstory (probably not necessary to read): I bought this system with 32gb of memory, and apparently opted out of a swap partition. Cities Skylines is one of my favorite games, and it is ...

Reinstalling the gentoo-sources package should only be necessary if you had previously removed the version you wanted to use now. You could add --noreplace to tell emerge to do nothing if the required version is already present.

Resetting the symlink probably was necessary, since you need that to ...

450.57 Sun Jul 5 14:52:29 UTC 2020 That you're using 450.57 from July when current stable in ::gentoo is 450.66 seems wrong. Maybe booted a old kernel? Make sure you're booting the one linked by /usr/src/linux that nvidia built against.

nvidia-drivers tend to be picky about library+driver mismatch ...

Oof...Hi all,

Just updated my system per my usual protocol* and everything went swimmingly (no kernel update available this time around). Rebooted after, and when it came back up, only my laptop's built-in screen was detected. Figured no biggie - rebuilt my Nvidia drivers, as that is usually the ...

Thank you...this also seems to work for me, except when trying to start a new game or load a save, it crashes trying to load :(

But I think that's unrelated. Probably a mod or asset. Nothing showing in the logs. EDIT: I disabled all non-essential mods and now the game is stable, so I will have to ...

Doing some more arbitrary digging online, I found another log location in ~/.config/unity3d/Colossal Order/Cities_ Skylines/Player.log:

Loading Mono
Mono location: /home/statik/.local/share/Steam/steamapps/common/Cities_Skylines/Cities_Data/Mono/x86_64
Steamworks_RegisterMonoInterface ...

Thanks for the suggestions...

Yes, I definitely have the Linux version installed.

I tried running the game w/ the "-nolauncher" option which had no effect, then tried to find the .sh file you mentioned, but there are no *.sh files for this game that I can find :(

Edit: I forgot to mention, I did ...

Thanks for the reply.

Do you mean which version of the game? Should be the latest, fresh off of Steam after I reinstalled it last night. Not sure how to tell for sure.

The Paradox Launcher I mentioned is just 3 processes that spawn when I try to start the game - no window ever appears or anything.

Hello,

Wondering if anyone else has had any difficulty in recent months with Cities Skylines. I haven't played it since probably last year, but it used to always run great. Haven't found any clues in searching the web & forums.

I've tried running steam through the command line, but there are no ...