the net4501-30: 133 Mhz CPU, 64 Mbyte SDRAM, 3 Ethernet, 2 Serial, CF socket, 1 Mini-PCI socket, 3.3V PCI connector. would work great, it is from soekris. They have NO fans, so they make NO noise. They have serial connections, which are awsome. Once you use a serial connection for administration you ...

Setup
I have a couple of hundred of users who need vpn connectivity. I would like to use ipsec-tools, becase of it's stability and security.

Problem
I want to have zero down timie, and I hope to achive this through some sort of load blanceer / fault tolerant software.

-=-=-=--=-=-

So i am ...

I second the above post.

Well you can still use the serial console even if you dont have a serial port on any of your computers.

How you might ask, USB that is.

Go to yor local exletronics super store and pick up a USB to serial converter.

so it will look like this

SUN BOX = 25 to 9 pin converter = Null Modem adapter ...

I would also like to add that

I want to be able to run Kismet but kismet does not run under osx so could i just bot into my Linux enviroment and use it just fine?

I am also looking into purchasing a power book this summer. I have actully had a chance to use osx last summer at work and i really started to love it. At work i needed to foward xsessions from unix boxes on the other side of the buiding and it was a bitch to set up on the M$ box that I had but It ...

Just use a serial cable.

I never owned a single SUN monitor mouse or keybord but you can control everything you need through a serial cable.

They give you all acess that a monitor would give you (even the bios). They are wonderfull, even better than a KVM for remote administration, and much ...

as long as you are not trying to run a web server on your work station you can just block all port 80 traffic with iptables.

Actully using RSYNC to keep two diffrent computers in sync would be impossible, becuase how rsync works, you can only send files from computer A to computer B. Just as if you where copying but RSYNC just saves you bandwith on subsequent transfures.

What you want to use since you will be editing ...

I did not know that sutch as unison existed.

I think i will start testing it out and implementing it on some of my server.

You can never have too much backup.

i have now upgraded the client to 3.0.7. But now when i try to mout the shares I get a new error.


smbmount //RAID 1 FILE SER/Server /home/bab/mnt/RAID 1 FILE SER/Server/ -o username=server%********,fmask=644,dmask=755,uid=1000,gid=100,ip=,debug=0
Can't resolve address

why woudl it not be able ...

I did some more work on it and this is what I found out


smbmount //RAID 1 FILE SER/Server /home/bab/mnt/RAID 1 FILE SER/Server/ -o username=server%,fmask=644,dmask=755,uid=1000,gid=100,ip=207.xxx.xxx.xxx,debug=0,workgroup=SAMBA
SMB connection failed
Anonymous login successful
23748: tree connect ...

Running program ssh -e none -l server -p 22 server "echo -n xsftp ; sftp-server"
Password:
xsftp
3: Protocol Initialization
There was an error initializing a SSH connection with the remote server. The error message from the remote server follows:
bash: line 1: sftp-server: command not found ...

I recently upgraded my fire server to 3.0.7 I belive that it was 2 something before, it had been a while sine I had upgraded.

So now all of a sudden i am not able to connect. I have gotten so anoyed that I have set the only username to smbpasswd -n. The server is working correctly and it is still ...

My seetup is a external 250GB USB hard drive. I have it mounted as sda. Everything is working but all the file names are truncatd to 8 charaters not including the extension.
I was thiinking that there must be some way to fix this. But what is the solution?
Do I need some special program to make it ...

*Bump*

Ok I am trying to share my external USB drive through SAMBA . The problem is that I only know how to mount under root. And every time I mount it as root SAMBA is not able to read the mount point since everything is owned by root. So i either need to make it so i can mount under a normal user or make ...

Well when you do ifconfig you should all of you ethernet devices come up. On my laptop when the card is working i will have eth0 (built in 10/100) and eth1 come up (802.11b). But at that setp you will want do a 'ifconfig eth0 down' so it nows how to route the packets, you could do a add default ...

I will try to answer some of your questions.

First of drivers tell the computer how to talk to the device. Basically every device talks a different language. But some things like certain network cards can use the same drivers, eg all network cards that use the tulip chirpiest can all use the same ...

I know that the cisco cards can go into RFMON for a fact, it can be done with the pcmica-cs cvs ones and the the kernel ones.

you need to change a few settings in the kismet.conf file and make sure that the card is in RFMON like the error message says.

Please help me out, i cant really compile anything withount this

Am I dong something wrong here, why is it giving me all the options insted of just disabling binary trees like it is supos to?



sh-2.05b# tune2fs ^dir_index /dev/hda3
tune2fs 1.32 (09-Nov-2002)
Usage: tune2fs [-c max-mounts-count] [-e errors-behavior] [-g group]
[-i interval[d|m|w]] [-j] [-J ...

basically I have a sub domain called music.antsmarching.net and I only want a few ip to be able to acess it. The xxx at the end of the ip is only for security reasons. i have been able to get the subdomain to work just find but the acess restrictions have been a little harder to do. Yes I have been ...

I have a few sub domains which I would like to make where only certain ip can acess them using the mod_access.

Do I have the vhost config set up correctly, I do not belive it is set up correctly since when I try to acess it lets me in even though I a not in the list.


<Location /status ...