hello,

I have a gentoo environment and I'm using qt-phonon with gstreamer backend,
I have alredy installed lastest version of these softwares,
including qt-phonon 4.7.1 and GStreamer Core 0.10.32, Base Plugins 0.10.32, Good Plugins 0.10.27, Ugly Plugins 0.10.17, Bad Plugins 0.10.21 (I made the ...

ho aggiunto:
ma senza risultati

salve a tutti.

anche io soffro di questo problema, o almeno di un problema decisamente simile.
Dopo pochi minuti di inattività il monitor si spegne e lo schermo diventa nero.

il bello (o il brutto, dipende) è che ho ri-compilato il kernel togliendo tutto il supporto ad acpi
(mi sono assicurato di ...

I think that if you have very important data on your notebook, you can plan dailies backup for these (on secure disks), and weekly backups for system files (on same disk), maybe in the end of the day, because with notebook you can damage hd accidentaly (ex: crashes), so you can make a full raid-0 ...

I thought that the deadine i/o scheduler was the best choice for my server because I need very intensive I/O operations, and I tought that was very stable (It isn't signed as unstable or experimental in linux kernel).

But I had this error (once), and for me downtime is very dangerous.

I searched ...

Hi

I'm using 2.6.21-gentoo-r4 kernel and "Deadline" as I/O scheduler.

I get a kernel error that freezes my server. I make an hard-reboot and then all is ok.

This is the error:

EIP C01D3576 deadline_dispatch_request+0xf3/0xfb SS:ESP 0068:f79c5c90


this is my .config:
#
# Automatically generated ...

ciao a tutti

io ho installato xfce4.4, tutto ok.. ma è interamente in inglese..
come faccio a farlo andare in italiano?

grazie!

some debug:

[PokerGame 119] initialisation turn 400725 ... finished
publishPacket(66008): current: type = POKER_START(66) serial = 0 game_id = 119 hands_count = 470, time = 72466, hand_serial = 400725, level = 0
resetLagmax: 120
publishPacket(66008): current: type = POKER_BOARD_CARDS(62) serial ...

I get this error compiling the .ebuild in portage




then mv -f ".deps/signal-glue.Tpo" ".deps/signal-glue.Plo"; else rm -f ".deps/signal-glue.Tpo"; exit 1; fi
if /bin/sh ../../../../libtool --silent --tag=CC --mode=compile x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../../../.. -DVERSION ...

No lspci?

In your .config you have "CONFIG_M586=y", surely this should be unset and "CONFIG_MPENTIUM4" selected?

I see that you have all the PATA and SATA (and SCSI) drivers selected.

So, if there is support in the 2.6.18 kernel then it should work. However, without the lspci output, there is ...

this is my config:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Tue Sep 26 20:01:29 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA ...

To boot the 965motherboard I use a pata hard disk that can boot with 945/955/975/via-something-i-don't-remember motherboard.

Now I post my lspci output, wait a while

I have a Intel DQ965GF motherboard.

It hasn't got any jmicron or similar pata controller, so the only one in the integrated one in the ich8 chipset

With the lastest bios and the lastest kernel, 2.6.18, no way to recognize the pata devices :(

...I tried to set all bios settings, legacy mode, ahci ...

I think gnome 2.16 is a great job!!

here

http://people.redhat.com/~heinzm/sw/dmraid/tst/dmraid-1.0.0.rc12-pre1.static

we can find a static binary of rc12, lastest testing version of dmraid


dmraid-1.0.0.rc12-pre1.static version: 1.0.0.rc12-pre1 (2006.07.06) static debug
dmraid-1.0.0.rc12-pre1.static library version: 1.0.0.rc12-pre1 ...

salve a tutti

ho aggiornato gnome alle versione 2.14 e adesso quando avvio galicesms mi dà questo errore:
Can't locate object method "signal_connect" via package "Gtk2::Window" at /usr/bin/galicesms line 801.

avete qualche proposta? grazie

(piattaforma Intel x86_64)

You'll need to install engrave and e_utils to get that, it isn't included with Engage.

Hi all.

I emerged engage, all ok.
then.. engrave, all ok
But when I want to emerge e_utils, emerge says that will install "e" package too.

Noway to emerge e_utils whitout "e" package? it seems very big ...

very very strange problem.

I have a logitech mx1000 attached in a Intel 945 Usb controller

yours?

(maybe depends by other hardware than cpu and amd64/EM64T instruction set)

I tiried it only in a EM64T system and works.

I put it into /usr/portage/gnome-base/control-panel/files
i add a epatch line in contol-panel.ebuild (like others)
and i do ebuild contol-panel-xxx.ebuild digest

than emerge

Hi

I have this problem too.

I use x86_64 gentoo and I have this problem afret use evdev.
this is the output of my /usr/libexec/gnome-settings-daemon:


** (gnome-settings-daemon:26453): WARNING **: The system configuration changed - but we remain silent
The program 'gnome-settings-daemon ...

Hi

I have this problem too.

I use x86_64 gentoo and I have this problem afret use evdev.
this is the output of my /usr/libexec/gnome-settings-daemon:


** (gnome-settings-daemon:26453): WARNING **: The system configuration changed - but we remain silent
The program 'gnome-settings-daemon ...

yeah, it's works for me with my i915 :)

and now it's fast !!!

i have compiled mesa 4.2 with GLX_MESA_copy_sub_buffer patch found on here:

http://people.freedesktop.org/~davidr/mesa-6.4.2-dri-copy-sub-buffer-1.patch

just modify the ebuild and add the patch


after that, i copy the i915 dri ...

I wrote to mesa's devs to get some info about these errors as no one I know of has a solution and I dont have an i810 card to even begin figuring out why.

> I maintain an handful of Xgl packages for a distro (gentoo) and I've had
> several users report errors with the i915_dri.so (and ...

I wrote to mesa's devs to get some info about these errors as no one I know of has a solution and I dont have an i810 card to even begin figuring out why.

> I maintain an handful of Xgl packages for a distro (gentoo) and I've had
> several users report errors with the i915_dri.so (and ...

Can someone post the Xgl command for i810?

when I start this from a term

[root@zapatta] /root(9,6G free) # Xgl :1 -ac -accel glx:pbuffer -accel xv:pbuffer
I resive following message:
No matching visual for __GLcontextMode with visual class = 4 (32770), nplanes = 24
No matching visual for ...