Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Kernel Panic under gentoo sources 2.4.20r1
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Portage & Programming
View previous topic :: View next topic  
Author Message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Fri Feb 28, 2003 8:54 pm    Post subject: Kernel Panic under gentoo sources 2.4.20r1 Reply with quote

Hello all,
I just upgraded to the new 2.4.20 r1 gentoo sources and I'm getting a kernel panic on boot every single time. It happens right after detecting my IDE devices, and has this line:

Code:

Partition check:
/dev/ide/host0/bus0/target0/lun0:kernel BUG at sched.c:1131!
invalid operand: 0000
CPU:    0
EIP      0010:[c01168c8>]   Not tainted
EFLAGS:  00010202



(continues with a dump of things, talking about the process swapper, it's line being...)

Code:

Process swapper (pid: 0, stackpage=c0363000)


Then with a stack and call trace that I don't have the patience to type out..

Then:

Code:

<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing


My old .19r10 kernel still boots/runs fine. Any ideas? Anyone else seeing this? Same config as the old one as well, dual proc MP system.
Back to top
View user's profile Send private message
truestone
n00b
n00b


Joined: 28 Sep 2002
Posts: 2
Location: Korea

PostPosted: Sat Mar 01, 2003 1:05 am    Post subject: Reply with quote

I had the same problem during installation of 1.4_rc3.

Here's my configuration :
P4 2.4G / Gigabyte 8INXP (7205 chipset)
2X512MB DDR
Elsa Gloria 4 750XG
ST380021A
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Sat Mar 01, 2003 2:06 am    Post subject: Reply with quote

Hmm...I'm going to guess this is some weird kernel option I have enabled, as did you then..though I couldn't guess what. I just copied over my old .config then menuconfigged it to look over the new options (and save them) Perhaps something new was introduced I was unaware of?

Thanks in advance for anyone with ideas of course...this is on a stable system, by the way. Thanks in advance for any help!
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Sat Mar 01, 2003 5:07 pm    Post subject: Reply with quote

Hmm..due to this bug appearing to exist in the scheduler, I was wondering if anyone had a suggestion for what options I might want to try tweaking?

The hardware is a Tyan Tiger MP, 512MB DDR, AMD Athlon MPs, one 1600 and one 1800 for me...
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Sat Mar 01, 2003 6:42 pm    Post subject: Reply with quote

I tried disabling power management after searching through some other kernel panic threads as well at this point, which doesn't seem to do anything. I also attempted to try compiling a uniprocessor kernel, but that fails as well. I'm having no luck with any of this....as always, 19r10 continues to work fine regardless though. I should probably file a bug report, but it appears to be a slightly dynamic error. memtest86 reports no errors...I'm really stuck here. :?

Please help :(
Back to top
View user's profile Send private message
tyler
n00b
n00b


Joined: 28 Aug 2002
Posts: 59
Location: toronto, ontario, canada

PostPosted: Sat Mar 01, 2003 6:50 pm    Post subject: Reply with quote

i'm getting the same issue and changing a bunch of options (ACPI, SMP) nothing changes.

i'll be waiting for gentoo-2.4.21 to come out.

just like you, 2.4.19-r10 is nice and stable, and risking anything is not worth it to me.



Dalrain wrote:
I tried disabling power management after searching through some other kernel panic threads as well at this point, which doesn't seem to do anything. I also attempted to try compiling a uniprocessor kernel, but that fails as well. I'm having no luck with any of this....as always, 19r10 continues to work fine regardless though. I should probably file a bug report, but it appears to be a slightly dynamic error. memtest86 reports no errors...I'm really stuck here. :?

Please help :(
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Sat Mar 01, 2003 7:31 pm    Post subject: Reply with quote

tyler wrote:
i'm getting the same issue and changing a bunch of options (ACPI, SMP) nothing changes.

i'll be waiting for gentoo-2.4.21 to come out.

just like you, 2.4.19-r10 is nice and stable, and risking anything is not worth it to me.



Thank you for replying, it's nice to know this isn't extremely isolated. I'd like to help debug it, but I'm not sure what exactly would be helpful. I suppose I'll wait for .21 as well. (or r2+ of .20 anyway)

Mods/Debuggers: Would my full .config be helpful for anything?
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Mon Mar 03, 2003 10:18 pm    Post subject: Reply with quote

It appears that this might have something to do with SCSI emulation on IDE devices, could the other people who have had this problem post here if they have SCSI emulation active on the IDE bus?

UPDATE: Removing SCSI entirely doesn't seem to have helped anything...I'm going to keep playing around with it a bit. :x

Anyone with ANY ideas on this, please post. :?
Back to top
View user's profile Send private message
truestone
n00b
n00b


Joined: 28 Sep 2002
Posts: 2
Location: Korea

PostPosted: Tue Mar 04, 2003 12:27 am    Post subject: Reply with quote

Code:

Partition check:
/dev/ide/host0/bus0/target0/lun0:kernel BUG at sched.c:1131!
invalid operand: 0000


In my case, the first partition of the first HDD is NTFS for Windows XP.
Didn't this cause the problem in my guess?
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Tue Mar 04, 2003 12:40 am    Post subject: Reply with quote

truestone wrote:
Code:

Partition check:
/dev/ide/host0/bus0/target0/lun0:kernel BUG at sched.c:1131!
invalid operand: 0000


In my case, the first partition of the first HDD is NTFS for Windows XP.
Didn't this cause the problem in my guess?


Well, I'm fairly sure it doesn't matter what is on the actual partition, as I run a Linux only machine with, well, Linux on that partition, ext2. So it's something else. I'm going to post my kernel config in the following message and file a bug report, see if we can't get some light shed on this.
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Tue Mar 04, 2003 12:54 am    Post subject: Reply with quote

Here's my kernel .config for .20-r1 gentoo-sources: (apologies for the length)

Code:

#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_LOLAT=y
# CONFIG_LOLAT_SYSCTL is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M586MMX31 is not set
# CONFIG_M686 is not set
# CONFIG_M68631 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMIII31 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MPENTIUM431 is not set
# CONFIG_MK6 is not set
# CONFIG_MK6231 is not set
# CONFIG_MK7 is not set
# CONFIG_MK731 is not set
# CONFIG_MXP31 is not set
CONFIG_MMP31=y
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_05GB is not set
# CONFIG_HIGHIO is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
# CONFIG_MULTIQUAD is not set
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y

#
# General setup
#
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
# CONFIG_TCIC is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_PM is not set
# CONFIG_APM is not set

#
# ACPI Support
#
# CONFIG_ACPI is not set

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
# CONFIG_MTD_GEN_PROBE is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_AMDSTD is not set
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PNC2000 is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_ELAN_104NC is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_MIXMEM is not set
# CONFIG_MTD_OCTAGON is not set
# CONFIG_MTD_VMAX is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_AMD766ROM is not set
# CONFIG_MTD_ICH2ROM is not set
# CONFIG_MTD_PCI is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_ISAPNP=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_STATS is not set

#
# Enterprise Volume Management System
#
# CONFIG_EVMS is not set
# CONFIG_EVMS_LOCAL_DEV_MGR is not set
# CONFIG_EVMS_DOS_SEGMENT_MGR is not set
# CONFIG_EVMS_GPT_SEGMENT_MGR is not set
# CONFIG_EVMS_SNAPSHOT is not set
# CONFIG_EVMS_DRIVELINK is not set
# CONFIG_EVMS_BBR is not set
# CONFIG_EVMS_LVM is not set
# CONFIG_EVMS_MD is not set
# CONFIG_EVMS_MD_LINEAR is not set
# CONFIG_EVMS_MD_RAID0 is not set
# CONFIG_EVMS_MD_RAID1 is not set
# CONFIG_EVMS_MD_RAID5 is not set
# CONFIG_EVMS_AIX is not set
# CONFIG_EVMS_OS2 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Cryptography support (CryptoAPI)
#
CONFIG_CRYPTO=m
CONFIG_CIPHERS=m
CONFIG_CIPHER_AES=m
CONFIG_CIPHER_TWOFISH=m
CONFIG_CIPHER_MARS=m
CONFIG_CIPHER_RC6=m
CONFIG_CIPHER_SERPENT=m
CONFIG_CIPHER_DFC=m
CONFIG_CIPHER_CAST5=m
CONFIG_CIPHER_DES=m
CONFIG_CIPHER_DES_EDE3=m
CONFIG_CIPHER_IDEA=m
CONFIG_CIPHER_BLOWFISH=m
CONFIG_CIPHER_RC5=m
# CONFIG_CIPHER_BLOWFISH_OLD is not set
# CONFIG_CIPHER_DUMMY is not set
# CONFIG_DIGESTS is not set
# CONFIG_CRYPTODEV is not set
# CONFIG_CRYPTOLOOP is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set

#
#   IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_CT_PROTO_GRE is not set
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_QUOTA is not set
# CONFIG_IP_NF_POOL is not set
CONFIG_IP_NF_MATCH_MAC=m
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
# CONFIG_IP_NF_MATCH_MPORT is not set
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_TIME is not set
# CONFIG_IP_NF_MATCH_RANDOM is not set
# CONFIG_IP_NF_MATCH_PSD is not set
# CONFIG_IP_NF_MATCH_NTH is not set
# CONFIG_IP_NF_MATCH_IPV4OPTIONS is not set
# CONFIG_IP_NF_MATCH_FUZZY is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STEALTH=m
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
# CONFIG_IP_NF_MATCH_IPLIMIT is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
# CONFIG_IP_NF_TARGET_NETLINK is not set
# CONFIG_IP_NF_TARGET_IPV4OPTSSTRIP is not set
CONFIG_IP_NF_TARGET_MIRROR=m
# CONFIG_IP_NF_TARGET_TARPIT is not set
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IPV6=m

#
#   IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_AHESP is not set
# CONFIG_IP6_NF_MATCH_LENGTH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
CONFIG_NET_HW_FLOWCONTROL=y

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_IPSEC is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CMD680 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_PIIX=y
CONFIG_PIIX_TUNING=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x_TRMS1040 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_TC35815 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_ARCNET_COM20020_CS is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_NET_PCMCIA_RADIO=y
CONFIG_PCMCIA_RAYCS=y
# CONFIG_PCMCIA_NETWAVE is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_AIRONET4500_CS is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_ECC=m
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
CONFIG_I2C_PPORT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_PCFEPP=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m

#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD_8151=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_SWORKS is not set
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set
CONFIG_DRM_NEW=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I810_XFREE_41 is not set
CONFIG_DRM_I830=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set

#
# PCMCIA character devices
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
# CONFIG_I2C_PARPORT is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_MIROPCM20_RDS is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# File systems
#
CONFIG_QUOTA=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_SUPERMOUNT is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT3_FS_XATTR_SHARING is not set
# CONFIG_EXT3_FS_XATTR_USER is not set
# CONFIG_EXT3_FS_POSIX_ACL is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_CONFIG=m
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XATTR_SHARING is not set
# CONFIG_EXT2_FS_XATTR_USER is not set
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
CONFIG_FS_MBCACHE=y

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_IMON is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_LOGO_TUX is not set
CONFIG_FB_LOGO_LARRY=y
# CONFIG_FB_LOGO_GENTOO is not set
# CONFIG_FB_LOGO_G is not set
# CONFIG_FB_LOGO_PENGUIN is not set
# CONFIG_FB_LOGO_POWEREDBY is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_YMFPCI_LEGACY is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_UHCI_ALT=y
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_HID is not set
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USBDNET is not set
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set

#
# Library routines
#
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set

#
# Grsecurity
#
CONFIG_GRKERNSEC=y
# CONFIG_GRKERNSEC_LOW is not set
CONFIG_GRKERNSEC_MID=y
# CONFIG_GRKERNSEC_HI is not set
# CONFIG_GRKERNSEC_CUSTOM is not set
# CONFIG_GRKERNSEC_KMEM is not set
# CONFIG_GRKERNSEC_PROC_MEMMAP is not set
# CONFIG_GRKERNSEC_PROC_ADD is not set
# CONFIG_GRKERNSEC_CHROOT_CHMOD is not set
# CONFIG_GRKERNSEC_CHROOT_NICE is not set
# CONFIG_GRKERNSEC_CHROOT_FINDTASK is not set
# CONFIG_GRKERNSEC_PAX_NOEXEC is not set
# CONFIG_GRKERNSEC_PAX_PAGEEXEC is not set
# CONFIG_GRKERNSEC_PAX_RANDEXEC is not set
# CONFIG_GRKERNSEC_PAX_SEGMEXEC is not set
# CONFIG_GRKERNSEC_PAX_EMUTRAMP is not set
# CONFIG_GRKERNSEC_PAX_MPROTECT is not set
# CONFIG_GRKERNSEC_AUDIT_MOUNT is not set
# CONFIG_GRKERNSEC_CHROOT_CAPS is not set
# CONFIG_GRKERNSEC_AUDIT_MOUNT is not set
# CONFIG_GRKERNSEC_CHROOT_FCHDIR is not set
# CONFIG_GRKERNSEC_ACL_DEBUG is not set
# CONFIG_GRKERNSEC_ACL_SUPERDEBUG is not set
# CONFIG_GRKERNSEC_ACL_HIDEKERN is not set
# CONFIG_GRKERNSEC_RESLOG is not set
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=4
CONFIG_GRKERNSEC_LINK=y
CONFIG_GRKERNSEC_FIFO=y
CONFIG_GRKERNSEC_RANDPID=y
CONFIG_GRKERNSEC_EXECVE=y
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_RANDID=y
CONFIG_GRKERNSEC_RANDSRC=y
CONFIG_GRKERNSEC_RANDRPC=y
CONFIG_GRKERNSEC_RANDPING=y
CONFIG_GRKERNSEC_FORKFAIL=y
CONFIG_GRKERNSEC_TIME=y
CONFIG_GRKERNSEC_SIGNAL=y
CONFIG_GRKERNSEC_CHROOT=y
# CONFIG_GRKERNSEC_CHROOT_SHMAT is not set
CONFIG_GRKERNSEC_CHROOT_MOUNT=y
CONFIG_GRKERNSEC_CHROOT_PIVOT=y
CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
CONFIG_GRKERNSEC_CHROOT_MKNOD=y
CONFIG_GRKERNSEC_PROC=y
CONFIG_GRKERNSEC_PROC_USERGROUP=y
CONFIG_GRKERNSEC_PROC_GID=10
CONFIG_GRKERNSEC_PAX_RANDUSTACK=y
# CONFIG_GRKERNSEC_PAX_RANDKSTACK is not set
CONFIG_GRKERNSEC_PAX_ASLR=y
CONFIG_GRKERNSEC_PAX_RANDMMAP=y
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Tue Mar 04, 2003 1:10 am    Post subject: Reply with quote

Filed bug report @ http://bugs.gentoo.org/show_bug.cgi?id=16781
Back to top
View user's profile Send private message
Target
Apprentice
Apprentice


Joined: 25 Apr 2002
Posts: 199

PostPosted: Tue Mar 04, 2003 5:57 am    Post subject: Reply with quote

It's a bug in the source code itself, it look like... It was probably introduced by a patch. My guess would be that 2.4.20 doesn't like one of the scheduling patches like low-latency or preempt.
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Tue Mar 04, 2003 12:37 pm    Post subject: Reply with quote

From the bug report after some build testing:

Quote:

I'd assume that your IDE controller is probably not supported by the 'old IDE core' the xfs-sources have the 'new IDE core' in them. Until you see a note in the gentoo-sources changelog to the effect of including the new IDE core, OR they are updated to a 2.4.21 version, stick to the XFS sources on this hardware.
Back to top
View user's profile Send private message
thinker5555
Tux's lil' helper
Tux's lil' helper


Joined: 03 Jun 2002
Posts: 77
Location: Texas

PostPosted: Fri Mar 07, 2003 5:43 pm    Post subject: Reply with quote

I wound up having the same problem last night with the Kernel panic and the infamous "Aiee" line... (using the gentoo-sources) The thing is, I built my kernel on Tuesday, and I had rebooted a few times between then and last night. It seemed to work fine. I noticed, though, that it happened ONLY after I got KDE and ALSA installed. That's when it gave me the problem... Even rebuilding the kernel didn't help. I wish I could narrow it down between the two, but unfortunately I didn't do any rebooting after installing KDE... only after ALSA. I don't know if that has any bearing on what anyone else has done or seen, but I just thought I'd throw that one in there...

Jeremy
Back to top
View user's profile Send private message
schroedinger
n00b
n00b


Joined: 15 Jan 2003
Posts: 43
Location: Vienna

PostPosted: Mon Mar 10, 2003 7:30 pm    Post subject: Reply with quote

I had the same problem. The solution was really easy: Disable 'FramebufferSupport' and
'Video mode selection support'
_________________
Imagination is more important than knowledge
Back to top
View user's profile Send private message
eyevee99
Apprentice
Apprentice


Joined: 16 Apr 2002
Posts: 239

PostPosted: Tue Mar 25, 2003 10:38 am    Post subject: Reply with quote

It's not related to the low latency or prempt patches (i can't even compile with prempt turned off).

i tried disabling framebuffer to no avail. not sure if i diabled video mode select or not. I'll have to try again.
Back to top
View user's profile Send private message
eyevee99
Apprentice
Apprentice


Joined: 16 Apr 2002
Posts: 239

PostPosted: Tue Mar 25, 2003 11:14 am    Post subject: Reply with quote

And it's got nothing to do with frame buffer and video mode select either.

;)

Is there a gentoo sources 2.4.21 yet? I like to use gentoo sources, but apparently I can't (according to the bug filed). For whatever reason my IDE is busted with 2.4.20.
Back to top
View user's profile Send private message
eyevee99
Apprentice
Apprentice


Joined: 16 Apr 2002
Posts: 239

PostPosted: Tue Mar 25, 2003 12:03 pm    Post subject: Reply with quote

Now I'm upset. I just emerged xfs-sources and tried them. Same error.


I've tried everything I can think of. I've take out frame buffers, video select, low taency, preempt. nothing unusual. Still dead.


UPDATE: I tell a lie. You can't remove the preemptive kernel option for gentoo or xfs sources 2.4.20_r2. The kernel wont compile if you do.

Next up: trying 2.4.19
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Tue Mar 25, 2003 1:44 pm    Post subject: Reply with quote

I had several lockups yesterday with gentoo-sources, 2.4.20-r1, and scp.

My sollution was to emerge gentoo-sources 2.4.20-r2

I haven't had lockups anymore since then.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
eyevee99
Apprentice
Apprentice


Joined: 16 Apr 2002
Posts: 239

PostPosted: Tue Mar 25, 2003 1:53 pm    Post subject: Reply with quote

unfortunately I've tried 2.4.20_r2

2.4.19_r10 works.
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Tue Mar 25, 2003 5:53 pm    Post subject: Reply with quote

Bloody Bastard: These aren't lockups, it's a failure to boot due to the "new" IDE code in the latest gentoo sources, also still in 2.4.20-r2.

I also tested 2.4.20-r2 to no avail. Still broken, and will be until it's noted in the changelog (as was said in the bug report)

Cheers,
-Dal
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Tue Mar 25, 2003 7:12 pm    Post subject: Reply with quote

But I had lockups in the same sched.c, so I thought they could be related.

Dalrain wrote:
Bloody Bastard: These aren't lockups, it's a failure to boot due to the "new" IDE code in the latest gentoo sources, also still in 2.4.20-r2.

I also tested 2.4.20-r2 to no avail. Still broken, and will be until it's noted in the changelog (as was said in the bug report)

Cheers,
-Dal

_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
Dalrain
Tux's lil' helper
Tux's lil' helper


Joined: 02 Jul 2002
Posts: 136
Location: Wooster, OH USA

PostPosted: Wed Mar 26, 2003 1:43 am    Post subject: Reply with quote

Bloody Bastard wrote:
But I had lockups in the same sched.c, so I thought they could be related.



Ah, right. I don't think it actually has to do with that code exactly though, more likely it's friends. At any rate, I'm quite glad to hear it's working for some people now. :) Still broken for me, but I love this distro too much to give up. Maybe I should try kernel hacking...looks pretty daunting though. Lots of "black magic" 8O
Back to top
View user's profile Send private message
eyevee99
Apprentice
Apprentice


Joined: 16 Apr 2002
Posts: 239

PostPosted: Wed Mar 26, 2003 3:23 am    Post subject: Reply with quote

The only way I could get a working kernel was to go back to 2.4.19_r10 gentoo-sources. Worked first compile after that.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portage & Programming All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum