| View previous topic :: View next topic |
| Author |
Message |
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
 Posted: Sun Dec 21, 2003 1:08 pm Post subject: XFree86 and ATI Driver |
 |
|
Hi,
I'm (still) trying to set up my Thinkpad r50p (with Fire GL T2).
I followed the [HOW-TO] Get ATI support in X with 2.6.x kernel using the gentoo-dev-sources.
I recompiled my kernel, using all options mentioned in the howto (as modules), and added them to modules.autoload.d/kernel-2.6
(I used genkernel --config, link "linux" is ok)
then i emerged ati-drivers and ran opengl-update ati
then rebooted, emerged and ran it again, just to be save.
lsmod gives:
| Code: |
Module Size Used by
ehci_hcd 23168 -
usbcore 105204 -
fglrx 202212 -
intel_agp 17816 -
agpgart 31112 -
e1000 82176 -
ide_tape 53936 -
st 36948 -
|
but still i get "(EE) No device detected"
This is my full log [UPDATED after recompiling ernel as mentioned below]:
| Code: |
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-gentoo i686 [ELF]
Build Date: 21 December 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Dec 21 17:00:41 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "LCD"
(**) | |-->Device "vga0"
(**) |-->Input Device "TouchPad"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(WW) Option "XkbCompat" requires an string value
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "no"
(**) XKB: layout: "no"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000ef60, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1014,0529 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1014,052d rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1014,052d rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1014,052d rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1014,052e rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1014,052d rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1014,052d rev 01 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1014,0554 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1014,0525 rev 01 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e54 card 1014,054f rev 80 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 104c,ac46 card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 02:00:1: chip 104c,ac46 card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 02:01:0: chip 8086,101e card 1014,0549 rev 03 class 02,00,00 hdr 00
(II) PCI: 02:02:0: chip 168c,1014 card 17ab,8331 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
[4] -1 0 0x00005000 - 0x000050ff (0x100) IX[B]
[5] -1 0 0x00005400 - 0x000054ff (0x100) IX[B]
[6] -1 0 0x00005800 - 0x000058ff (0x100) IX[B]
[7] -1 0 0x00005c00 - 0x00005cff (0x100) IX[B]
[8] -1 0 0x00006000 - 0x000060ff (0x100) IX[B]
[9] -1 0 0x00006400 - 0x000064ff (0x100) IX[B]
[10] -1 0 0x00006800 - 0x000068ff (0x100) IX[B]
[11] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B]
[12] -1 0 0x00007000 - 0x000070ff (0x100) IX[B]
[13] -1 0 0x00007400 - 0x000074ff (0x100) IX[B]
[14] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[15] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B]
[16] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
[17] -1 0 0x00008400 - 0x000084ff (0x100) IX[B]
[18] -1 0 0x00008800 - 0x000088ff (0x100) IX[B]
[19] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xc0200000 - 0xcfffffff (0xfe00000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:0:0), (2,3,6), BCTRL: 0x03c0 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:0:1), (2,7,10), BCTRL: 0x03c0 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x4e54) rev 128, Mem @ 0xe0000000/27, 0xc0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]
[1] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[2] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[3] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[4] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[5] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[6] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[11] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[12] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[13] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[14] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[15] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[16] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[17] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[18] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[20] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]
[1] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[2] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[3] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[4] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[5] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[6] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[11] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[12] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[13] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[14] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[15] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[16] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[17] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[18] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[19] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[20] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xc0210000 - 0xc021ffff (0x10000) MX[B]
[6] -1 0 0xc0200000 - 0xc020ffff (0x10000) MX[B]
[7] -1 0 0xc0220000 - 0xc023ffff (0x20000) MX[B]
[8] -1 0 0xc0000800 - 0xc00008ff (0x100) MX[B]
[9] -1 0 0xc0000c00 - 0xc0000dff (0x200) MX[B]
[10] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[11] -1 0 0xc0000000 - 0xc00003ff (0x400) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00008000 - 0x0000803f (0x40) IX[B]
[18] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[19] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[20] -1 0 0x000018c0 - 0x000018ff (0x40) IX[B]
[21] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[B]
[23] -1 0 0x00001860 - 0x0000186f (0x10) IX[B]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[26] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[27] -1 0 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0, module version = 3.2.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL unknown)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
|
and this is my XF86Config-4 (I used the one from the howto and just changed VideoRAM and Monitor Values) (also I tried the output of gflrxconfig):
| Code: |
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
Mode 0666
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# This option allows the X server to start up even if the
# mouse device can't be opened/initialized.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "no"
Option "XkbOptions" ""
Option "XkbCompat" ""
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "TouchPad"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
#Section "InputDevice"
# Identifier "USBmouse"
# Driver "mouse"
# Option "Protocol" "IMPS/2"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5"
#EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 48.5
VertRefresh 40 - 70
Option "DPMS"
EndSection
Section "Monitor"
Identifier "LCD"
# ModelName "Flat Panel"
# VendorName "hp"
# Option "DPMS"
HorizSync 31.5 - 48.5
VertRefresh 40-70
EndSection
#Section "Monitor"
# Identifier "CRT-21@Work"
# ModelName "G550"
# VendorName "Sony"
# Option "DPMS"
# # HorizSync ""
# # VertRefresh ""
#EndSection
#Section "Monitor"
# Identifier "CRT-19@Home"
# ModelName "96P"
# VendorName "Samtron"
# HorizSync 30-96
# VertRefresh 50-160
# Option "DPMS"
#EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
# === ATI device section ===
Section "Device"
Identifier "vga0"
VendorName "ATI"
BoardName "ATI Mobility Fire GL T2"
Driver "fglrx"
# === Own Settings (CTh) ===
# VideoRam 131072
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
# === disable PnP Monitor ===
# Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "AUTO, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes" # "no" to turn on TV out
Option "TVStandard" "PAL-B"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Support ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:01:00:0" # vendor=1002, device=4c54
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Screen0"
Device "vga0" # ATI Radeon Mobility 9200
Monitor "LCD"
DefaultDepth 24
# Option "backingstore"
Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1600 1200
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
Screen "Screen0"
InputDevice "TouchPad" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
###EOF###
|
Last edited by ErzlordCaron on Sun Dec 21, 2003 4:06 pm; edited 1 time in total |
|
| Back to top |
|
 |
lightsout
Tux's lil' helper
Joined: 13 Apr 2003
Posts: 113
Location: UK
|
| Posted: Sun Dec 21, 2003 1:29 pm Post subject: |
|
|
| Quote: | | BusID "PCI:01:00:0" # vendor=1002, device=4c54 |
Remove this from your XF86Config file.
If you have 1 graphics card, X will detect it automatically. I've found that fglrxconfig generates this line wrong for me, and causes X to bomb out. If it is not set, X will find it all by itself. |
|
| Back to top |
|
|
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
| Posted: Sun Dec 21, 2003 1:38 pm Post subject: |
|
|
doesn't change anything, and also it was right.... checked lspci...
but thanks for reading all this |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sun Dec 21, 2003 3:29 pm Post subject: |
|
|
Can you post the output from "dmesg"?
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
| Posted: Sun Dec 21, 2003 3:36 pm Post subject: |
|
|
sure. already consider to send you a PM, watching some other threads i got the impression you know what you are talking about 
UPDATE: I read the FAQ in your signature... I think i had enabled "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
I'm compiling the kernel now without it. Let's if this works...
UPDATE: Still does not word, but now rtc-modules gives an error ([!!]) at startup, although it doesn't seem to be mentioned in dmesg (nothing in "dmesg|grep rtc")
I now updated the output after recompiling
| Code: |
Linux version 2.6.0-gentoo (root@CARON-I) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #1 Sun Dec 21 16:50:04 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data)
BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 130912
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126816 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v002 IBM ) @ 0x000f6b40
ACPI: XSDT (v001 IBM TP-1R 0x00002110 LTP 0x00000000) @ 0x1ff6c263
ACPI: FADT (v003 IBM TP-1R 0x00002110 IBM 0x00000001) @ 0x1ff6c300
ACPI: SSDT (v001 IBM TP-1R 0x00002110 MSFT 0x0100000e) @ 0x1ff6c4b4
ACPI: ECDT (v001 IBM TP-1R 0x00002110 IBM 0x00000001) @ 0x1ff77e26
ACPI: TCPA (v001 IBM TP-1R 0x00002110 PTL 0x00000001) @ 0x1ff77e78
ACPI: BOOT (v001 IBM TP-1R 0x00002110 LTP 0x00000001) @ 0x1ff77fd8
ACPI: DSDT (v001 IBM TP-1R 0x00002110 MSFT 0x0100000e) @ 0x00000000
Building zonelist for node : 0
Kernel command line: root=/dev/hda8
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1694.825 MHz processor.
Console: colour VGA+ 80x25
Memory: 513768k/523648k available (2369k kernel code, 9096k reserved, 787k data, 140k init, 0k highmem)
Calibrating delay loop... 3350.52 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 414k freed
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040
CPU: Intel(R) Pentium(R) M processor 1700MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
ACPI: Found ECDT
ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.USB7._INI] (Node dfe5aca0), AE_AML_REGION_LIMIT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
SGI XFS for Linux with ACLs, realtime, no debug enabled
SGI XFS Quota Management subsystem
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: HTS726060M9AT00, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MATSHITADVD-RAM UJ-811, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 110232946 sectors (56439 MB)
native capacity is 117210240 sectors (60011 MB)
hda: Host Protected Area disabled.
hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
mice: PS/2 mouse device common for all mice
input: PS/2 Synaptics TouchPad on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda8) for (hda8)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 140k freed
Adding 506508k swap on /dev/hda7. Priority:-1 extents:1
st: Version 20030811, fixed bufsize 32768, s/g segs 256
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xd0000000
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 3.2.8 [Sep 21 2003] on minor 0
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem e093e000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
eth0: no IPv6 routers present
|
Last edited by ErzlordCaron on Sun Dec 21, 2003 4:09 pm; edited 1 time in total |
|
| Back to top |
|
|
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
| Posted: Sun Dec 21, 2003 4:08 pm Post subject: |
|
|
| I updated the log output and the dmesg output after recompiling kernel (old ones saved) |
|
| Back to top |
|
|
lightsout
Tux's lil' helper
Joined: 13 Apr 2003
Posts: 113
Location: UK
|
| Posted: Sun Dec 21, 2003 4:18 pm Post subject: |
|
|
Are both agpgart and intel_agp both being loaded as modules?
If you do a modprobe against both modules, do you get any error messages? (other than them already being in the kernel) |
|
| Back to top |
|
|
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
| Posted: Sun Dec 21, 2003 4:26 pm Post subject: |
|
|
Both:
FATAL: Module x already in kernel. |
|
| Back to top |
|
|
lightsout
Tux's lil' helper
Joined: 13 Apr 2003
Posts: 113
Location: UK
|
| Posted: Sun Dec 21, 2003 4:55 pm Post subject: |
|
|
Ok, that is good. Since building that kernel to it's current state, have you re-emerge'd ati-drivers?
You've said that /usr/src/linux was already pointing at the correct (2.6.0) kernel, so that is good.
I'm a bit stumped mind, I can get it to work under my Athlon/VIA combo, but I'm not so sure about the Intel stuff if that makes any difference. |
|
| Back to top |
|
|
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
| Posted: Sun Dec 21, 2003 5:45 pm Post subject: |
|
|
yes, i have.... also the linux link is ok...
hope Wegde_ knows something... |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sun Dec 21, 2003 8:35 pm Post subject: |
|
|
I don't see anything wrong with your dmesg output.
This may be a bit of a long shot, but try building a kernel without using genkernel. I remember a couple of people who were having problems that went away when then stopped using it. Either create a fresh copy of the kernel source dir, or run "make mrproper" in your existing dir (this will delete the old config though, you might want to make a copy instead and update the /usr/src/linux link).
I'm also wondering if the driver actually supports your card. There is supposed to be a new version out this week sometime which may help. Can you post the output from "lspci"?
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Mon Dec 22, 2003 11:58 am Post subject: |
|
|
Well, it seems your card isn't supported yet, but I just read a post from Matthew Tippett (ATI Linux dev) over on the Rage3D forums (link) that says:
| Quote: | The FireGL T2 is supported in the upcoming Linux release.
Stay tuned.
Matt |
Like I said, the new version should be out this week sometime
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
lightsout
Tux's lil' helper
Joined: 13 Apr 2003
Posts: 113
Location: UK
|
| Posted: Mon Dec 22, 2003 12:12 pm Post subject: |
|
|
That would explain it, although I did find it odd given the driver says this:
| Quote: | ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2), |
Ah well, roll on the new version. Might be worth trying the default radeon driver in XFree for the moment - see if that works any better?! |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Mon Dec 22, 2003 12:59 pm Post subject: |
|
|
| lightsout wrote: | | That would explain it, although I did find it odd given the driver says this: |
Yeah, that's why I wasn't sure
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
| Posted: Mon Dec 22, 2003 2:43 pm Post subject: |
|
|
you know there is a desktop card with this name, too?
well, i used last night to reinstall my complete gentoo, mainly due to some mess with kernel versions (you get a lot of experience while installing)
it still does not work. i will wait for the new release, then i will contact ati |
|
| Back to top |
|
|
sneakerski
Apprentice
Joined: 14 Oct 2003
Posts: 168
|
| Posted: Mon Dec 22, 2003 8:24 pm Post subject: |
|
|
| well, it appears the problem is instead your card, but i have the 9000 pro and was getting the same error as you. my fix for it was to go into the XF86Config-4 file the ati config program produced, and change a few of teh busID parameters. it had configured CRT-out and TV-out as the same busID, when they instead hd to to be PCI:2:0:0 and PCI:2:0:1 (respectivly) a small little fix that did wonders for me . (do a cat /proc/pci to see where stuff is). good luck |
|
| Back to top |
|
|
ErzlordCaron
n00b
Joined: 10 Dec 2003
Posts: 28
|
| Posted: Tue Jan 06, 2004 3:40 pm Post subject: |
|
|
I installed ati-drivers 3.7 now, and it works.
But I am a bit disappointed about my glxgears score... only around 10000 frames in 5 seconds... (standard windowssize) do you think this is normal?
around 155 fps in 1600x1200 fullscreen... |
|
| Back to top |
|
|
geforce
l33t
Joined: 29 Dec 2003
Posts: 654
Location: Canada
|
| Posted: Thu Jan 22, 2004 9:52 pm Post subject: FPS problem with an ATI Radeon 9600Pro 128 |
|
|
i get around 300 FPS with a Radeon 9600 Pro 128 and an AMD 2800+ 333... 512 mb RAM. what the hell !?!
I cannot play games, No openGL ??!??? |
|
| Back to top |
|
|
lightsout
Tux's lil' helper
Joined: 13 Apr 2003
Posts: 113
Location: UK
|
| Posted: Thu Jan 22, 2004 10:05 pm Post subject: |
|
|
Ok! Check these steps:
1. Have you compiled the fglrx module correctly, and are using it in XFree's config?
2. Are the agpgart & agp chipset driver both compiled as modules, as well as being modprobe'd into the system (/etc/modules.autoload.d/blah does this)
3. Post your XFree log, that may also help. /var/log/XFree.0.log. |
|
| Back to top |
|
|
geforce
l33t
Joined: 29 Dec 2003
Posts: 654
Location: Canada
|
| Posted: Fri Jan 23, 2004 11:59 pm Post subject: Here |
|
|
/etc/modules.autoload.d
| Quote: |
3c59x
radeon
cmpci
agpgart
fglrx
|
/var/log/XFree.0.log:
| Quote: |
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-gss i686 [ELF]
Build Date: 28 December 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Jan 23 13:54:16 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "ca"
(**) XKB: layout: "ca"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000002c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 10de,0c17 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1043,80a7 rev a1 class 02,00,00 hdr 00
(II) PCI: 00:05:0: chip 10de,006b card 1043,0c11 rev a2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,006a card 1043,8095 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:0c:0: chip 10de,006d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,006e card 1043,809a rev a3 class 0c,00,10 hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:09:0: chip 109e,036e card 107d,6606 rev 11 class 04,00,00 hdr 80
(II) PCI: 01:09:1: chip 109e,0878 card 107d,6606 rev 11 class 04,80,00 hdr 80
(II) PCI: 01:0b:0: chip 1095,3112 card 1095,6112 rev 02 class 01,04,00 hdr 00
(II) PCI: 02:01:0: chip 10b7,9201 card 1043,80ab rev 40 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 1002,4150 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 03:00:1: chip 1002,4170 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x0000afff (0x2000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdd000000 - 0xdeffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xd8ffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:12:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd9000000 - 0xdaffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 3 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xdb000000 - 0xdcffffff (0x2000000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[B]
(--) PCI: (1:9:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xd8000000/12
(--) PCI:*(3:0:0) ATI Technologies Inc unknown chipset (0x4150) rev 0, Mem @ 0xb0000000/28, 0xdc000000/16, I/O @ 0xc000/8
(--) PCI: (3:0:1) ATI Technologies Inc unknown chipset (0x4170) rev 0, Mem @ 0xc0000000/28, 0xdc010000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xda000000 - 0xda00007f (0x80) MX[B]
[1] -1 0 0xde000000 - 0xde0001ff (0x200) MX[B]
[2] -1 0 0xd8001000 - 0xd8001fff (0x1000) MX[B]
[3] -1 0 0xdf085000 - 0xdf08503f (0x40) MX[B]
[4] -1 0 0xdf084000 - 0xdf0847ff (0x800) MX[B]
[5] -1 0 0xdf087000 - 0xdf087fff (0x1000) MX[B]
[6] -1 0 0xdf000000 - 0xdf07ffff (0x80000) MX[B]
[7] -1 0 0xdf083000 - 0xdf083fff (0x1000) MX[B]
[8] -1 0 0xdf082000 - 0xdf0820ff (0x100) MX[B]
[9] -1 0 0xdf081000 - 0xdf081fff (0x1000) MX[B]
[10] -1 0 0xdf086000 - 0xdf086fff (0x1000) MX[B]
[11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[12] -1 0 0xdc000000 - 0xdc00ffff (0x10000) MX[B](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[14] -1 0 0xd8000000 - 0xd8000fff (0x1000) MX[B](B)
[15] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[16] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[17] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[18] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[19] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[20] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[22] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[24] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[25] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xdc010000 - 0xdc01ffff (0x10000) MX[B](B)
[1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xda000000 - 0xda00007f (0x80) MX[B]
[1] -1 0 0xde000000 - 0xde0001ff (0x200) MX[B]
[2] -1 0 0xd8001000 - 0xd8001fff (0x1000) MX[B]
[3] -1 0 0xdf085000 - 0xdf08503f (0x40) MX[B]
[4] -1 0 0xdf084000 - 0xdf0847ff (0x800) MX[B]
[5] -1 0 0xdf087000 - 0xdf087fff (0x1000) MX[B]
[6] -1 0 0xdf000000 - 0xdf07ffff (0x80000) MX[B]
[7] -1 0 0xdf083000 - 0xdf083fff (0x1000) MX[B]
[8] -1 0 0xdf082000 - 0xdf0820ff (0x100) MX[B]
[9] -1 0 0xdf081000 - 0xdf081fff (0x1000) MX[B]
[10] -1 0 0xdf086000 - 0xdf086fff (0x1000) MX[B]
[11] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[12] -1 0 0xdc000000 - 0xdc00ffff (0x10000) MX[B](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[14] -1 0 0xd8000000 - 0xd8000fff (0x1000) MX[B](B)
[15] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[16] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[17] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[18] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[19] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[20] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[22] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[24] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[25] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[26] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xdc010000 - 0xdc01ffff (0x10000) MX[B](B)
[1] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xda000000 - 0xda00007f (0x80) MX[B]
[6] -1 0 0xde000000 - 0xde0001ff (0x200) MX[B]
[7] -1 0 0xd8001000 - 0xd8001fff (0x1000) MX[B]
[8] -1 0 0xdf085000 - 0xdf08503f (0x40) MX[B]
[9] -1 0 0xdf084000 - 0xdf0847ff (0x800) MX[B]
[10] -1 0 0xdf087000 - 0xdf087fff (0x1000) MX[B]
[11] -1 0 0xdf000000 - 0xdf07ffff (0x80000) MX[B]
[12] -1 0 0xdf083000 - 0xdf083fff (0x1000) MX[B]
[13] -1 0 0xdf082000 - 0xdf0820ff (0x100) MX[B]
[14] -1 0 0xdf081000 - 0xdf081fff (0x1000) MX[B]
[15] -1 0 0xdf086000 - 0xdf086fff (0x1000) MX[B]
[16] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[17] -1 0 0xdc000000 - 0xdc00ffff (0x10000) MX[B](B)
[18] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[19] -1 0 0xd8000000 - 0xd8000fff (0x1000) MX[B](B)
[20] -1 0 0xdc010000 - 0xdc01ffff (0x10000) MX[B](B)
[21] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[25] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[26] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[27] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[28] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[29] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[31] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[33] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[34] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[35] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.7.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10)
(II) Primary Device is: PCI 03:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:3:0:1) found
(--) Chipset ATI RV350 AP (R9600) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xda000000 - 0xda00007f (0x80) MX[B]
[6] -1 0 0xde000000 - 0xde0001ff (0x200) MX[B]
[7] -1 0 0xd8001000 - 0xd8001fff (0x1000) MX[B]
[8] -1 0 0xdf085000 - 0xdf08503f (0x40) MX[B]
[9] -1 0 0xdf084000 - 0xdf0847ff (0x800) MX[B]
[10] -1 0 0xdf087000 - 0xdf087fff (0x1000) MX[B]
[11] -1 0 0xdf000000 - 0xdf07ffff (0x80000) MX[B]
[12] -1 0 0xdf083000 - 0xdf083fff (0x1000) MX[B]
[13] -1 0 0xdf082000 - 0xdf0820ff (0x100) MX[B]
[14] -1 0 0xdf081000 - 0xdf081fff (0x1000) MX[B]
[15] -1 0 0xdf086000 - 0xdf086fff (0x1000) MX[B]
[16] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[17] -1 0 0xdc000000 - 0xdc00ffff (0x10000) MX[B](B)
[18] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[19] -1 0 0xd8000000 - 0xd8000fff (0x1000) MX[B](B)
[20] -1 0 0xdc010000 - 0xdc01ffff (0x10000) MX[B](B)
[21] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[25] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[26] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[27] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[28] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[29] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[31] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[33] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[34] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[35] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8208380
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xda000000 - 0xda00007f (0x80) MX[B]
[6] -1 0 0xde000000 - 0xde0001ff (0x200) MX[B]
[7] -1 0 0xd8001000 - 0xd8001fff (0x1000) MX[B]
[8] -1 0 0xdf085000 - 0xdf08503f (0x40) MX[B]
[9] -1 0 0xdf084000 - 0xdf0847ff (0x800) MX[B]
[10] -1 0 0xdf087000 - 0xdf087fff (0x1000) MX[B]
[11] -1 0 0xdf000000 - 0xdf07ffff (0x80000) MX[B]
[12] -1 0 0xdf083000 - 0xdf083fff (0x1000) MX[B]
[13] -1 0 0xdf082000 - 0xdf0820ff (0x100) MX[B]
[14] -1 0 0xdf081000 - 0xdf081fff (0x1000) MX[B]
[15] -1 0 0xdf086000 - 0xdf086fff (0x1000) MX[B]
[16] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[17] -1 0 0xdc000000 - 0xdc00ffff (0x10000) MX[B](B)
[18] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[19] -1 0 0xd8000000 - 0xd8000fff (0x1000) MX[B](B)
[20] -1 0 0xdc010000 - 0xdc01ffff (0x10000) MX[B](B)
[21] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[22] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[23] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[24] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[27] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[28] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[29] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[30] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[31] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[32] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[34] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[36] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[37] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[38] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 3 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "on"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "on"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "2"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "6"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "no"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): QBS enabled
(**) fglrx(0): QBS Sync Mode is 1
(==) fglrx(0): Overlay Scaler is disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI RV350 AP (R9600)" (Chipset = 0x4150)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI grafics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xdc000000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x04
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): OpenGL Overlay enabled
(**) fglrx(0): QBS disabled when OpenGL Overlay enabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=50000; xclk=29700
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Monitor0: Using hsync range of 31.50-60.00 kHz
(II) fglrx(0): Monitor0: Using vrefresh range of 60.00-85.00 Hz
(II) fglrx(0): Clock range: 20.00 to 500.00 MHz
(II) fglrx(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "800x600" (vrefresh out of range)
(II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "512x384" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "512x384" (hsync out of range)
(II) fglrx(0): Not using default mode "1152x864" (hsync out of range)
(II) fglrx(0): Not using default mode "576x432" (hsync out of range)
(II) fglrx(0): Not using default mode "1280x960" (hsync out of range)
(II) fglrx(0): Not using default mode "640x480" (hsync out of range)
(II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "640x512" (hsync out of range)
(II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "640x512" (hsync out of range)
(II) fglrx(0): Not using default mode "1280x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "640x512" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "1152x768" (vrefresh out of range)
(II) fglrx(0): Not using default mode "576x384" (vrefresh out of range)
(II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
(II) fglrx(0): Not using default mode "700x525" (hsync out of range)
(II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
(II) fglrx(0): Not using default mode "700x525" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "800x512" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "1280x960" (width too large for virtual size)
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) fglrx(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) fglrx(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) fglrx(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) fglrx(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) fglrx(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) fglrx(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) fglrx(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) fglrx(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) fglrx(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) fglrx(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) fglrx(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) fglrx(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) fglrx(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) fglrx(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) fglrx(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) fglrx(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) fglrx(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) fglrx(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) fglrx(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) fglrx(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) fglrx(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) fglrx(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) fglrx(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) fglrx(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.7.0
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x0000081f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=2
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdc000000 - 0xdc00ffff (0x10000) MX[B]
[1] 0 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xda000000 - 0xda00007f (0x80) MX[B]
[8] -1 0 0xde000000 - 0xde0001ff (0x200) MX[B]
[9] -1 0 0xd8001000 - 0xd8001fff (0x1000) MX[B]
[10] -1 0 0xdf085000 - 0xdf08503f (0x40) MX[B]
[11] -1 0 0xdf084000 - 0xdf0847ff (0x800) MX[B]
[12] -1 0 0xdf087000 - 0xdf087fff (0x1000) MX[B]
[13] -1 0 0xdf000000 - 0xdf07ffff (0x80000) MX[B]
[14] -1 0 0xdf083000 - 0xdf083fff (0x1000) MX[B]
[15] -1 0 0xdf082000 - 0xdf0820ff (0x100) MX[B]
[16] -1 0 0xdf081000 - 0xdf081fff (0x1000) MX[B]
[17] -1 0 0xdf086000 - 0xdf086fff (0x1000) MX[B]
[18] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[19] -1 0 0xdc000000 - 0xdc00ffff (0x10000) MX[B](B)
[20] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[21] -1 0 0xd8000000 - 0xd8000fff (0x1000) MX[B](B)
[22] -1 0 0xdc010000 - 0xdc01ffff (0x10000) MX[B](B)
[23] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[27] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[30] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[31] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[32] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[33] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[34] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[35] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[36] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[37] -1 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[38] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[39] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[40] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[41] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[43] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xb0500000 (size=0x07b00000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 1
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 2
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 3
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 4
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 5
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 7
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 8
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 9
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 10
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 11
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 12
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 13
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 14
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 7419
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "AGPFastWrite" is not used
(WW) fglrx(0): Option "EnablePageFlip" is not used
(WW) fglrx(0): Option "AGPMode" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
SetKbdSettings - type: 2 rate: 30 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
|
It seems than OpenGL is not loaded because I can't play games ! (quake3 tell me that:
| Quote: |
geforce@geforce geforce $ quake3
Q3 1.32b linux-i386 Nov 14 2002
----- FS_Startup -----
Current search path:
/home/geforce/.q3a/baseq3
/usr/local/games/quake3/baseq3/pak8.pk3 (9 files)
/usr/local/games/quake3/baseq3/pak7.pk3 (4 files)
/usr/local/games/quake3/baseq3/pak6.pk3 (64 files)
/usr/local/games/quake3/baseq3/pak5.pk3 (7 files)
/usr/local/games/quake3/baseq3/pak4.pk3 (272 files)
/usr/local/games/quake3/baseq3/pak3.pk3 (4 files)
/usr/local/games/quake3/baseq3/pak2.pk3 (148 files)
/usr/local/games/quake3/baseq3/pak1.pk3 (26 files)
/usr/local/games/quake3/baseq3/pak0.pk3 (3539 files)
/usr/local/games/quake3/baseq3
./quake3.x86/baseq3
----------------------
4073 files in pk3 files
execing default.cfg
execing q3config.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
------- Input Initialization -------
Joystick is not active.
------------------------------------
----- Client Initialization -----
----- Initializing Renderer ----
-------------------------------
----- Client Initialization Complete -----
----- R_Init -----
...loading libGL.so.1: Initializing OpenGL display
...setting mode 6: 1024 768
Using XFree86-VidModeExtension Version 2.2
XFree86-VidModeExtension Activated at 1024x768
Using 8/8/8 Color bits, 16 depth, 0 stencil display.
GL_RENDERER: Mesa GLX Indirect
***********************************************************
You are using software Mesa (no hardware acceleration)!
Driver DLL used: libGL.so.1
If this is intentional, add
"+set r_allowSoftwareGL 1"
to the command line when starting the game.
***********************************************************
...WARNING: could not set the given mode (6)
Initializing OpenGL display
...setting mode 3: 640 480
Using XFree86-VidModeExtension Version 2.2
XFree86-VidModeExtension Activated at 640x480
Received signal 11, exiting...
|
|
|
| Back to top |
|
|
geforce
l33t
Joined: 29 Dec 2003
Posts: 654
Location: Canada
|
| Posted: Sat Jan 24, 2004 12:02 am Post subject: doh |
|
|
oh crap, I looked at my Xfree86.0.log and look what i founded:
| Quote: |
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
|
|
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Jan 24, 2004 12:24 am Post subject: |
|
|
Your problem is that you have a module called "radeon" loaded. This is a DRM module, and will prevent the fglrx driver from working properly. If you've got DRM support in your kernel (under Character Devices -> Direct Rendering Manager), disable it. If you've emerged xfree-drm, get rid of it with "emerge -C xfree-drm". The "radeon" driver doesn't support the 9600, so you aren't losing anything by doing that. Once you've gotten rid of the DRM stuff, try starting X again and hopefully things will work this time.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
geforce
l33t
Joined: 29 Dec 2003
Posts: 654
Location: Canada
|
| Posted: Sat Jan 24, 2004 8:52 pm Post subject: OK but now ? |
|
|
| I have disabled the Rendering option you suggest and i removed RADEON in the kernel boot config file pis I still got 330 FPS and I still can't play games..... I didn't emerged Xfree ou Xfree-drm, when i emerged ATI-DRIVERS, it emerged itself Xfree... |
|
| Back to top |
|
|
Wedge_
Advocate
Joined: 08 Aug 2002
Posts: 3614
Location: Scotland
|
| Posted: Sat Jan 24, 2004 9:09 pm Post subject: |
|
|
Try setting "UseInternalAGPGART" to "no" in your XF86Config.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ |
|
| Back to top |
|
|
geforce
l33t
Joined: 29 Dec 2003
Posts: 654
Location: Canada
|
| Posted: Sun Jan 25, 2004 3:52 am Post subject: doh |
|
|
| with this setting, Gnome can't start (a problem related with "DISPLAY" , I don't remember the end).... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
