Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Erreur du demarrage du service DHCP [RESOLU]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
sdoudou306
n00b
n00b


Joined: 15 Mar 2014
Posts: 35

PostPosted: Sun Apr 27, 2014 8:05 pm    Post subject: Erreur du demarrage du service DHCP [RESOLU] Reply with quote

bonjour après plusieurs tentative de réglage de mon fichier de configuration j'ai toujours la même erreur.
Code:

localhost ~ # /etc/init.d/dhcpd start
 * Starting dhcpd ...
 * start-stop-daemon: failed to start `/usr/sbin/dhcpd'                   [ !! ]
 * ERROR: dhcpd failed to start

voici le log
Code:

Apr 27 21:56:29 localhost dhcpd: Internet Systems Consortium DHCP Server 4.2.5-P1 Gentoo-r2
Apr 27 21:56:29 localhost dhcpd: Copyright 2004-2013 Internet Systems Consortium.
Apr 27 21:56:29 localhost dhcpd: All rights reserved.
Apr 27 21:56:29 localhost dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Apr 27 21:56:29 localhost dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Apr 27 21:56:29 localhost dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Apr 27 21:56:29 localhost dhcpd: Wrote 0 leases to leases file.
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: No subnet declaration for enp3s0 (192.168.3.2).
Apr 27 21:56:29 localhost dhcpd: ** Ignoring requests on enp3s0.  If this is not what
Apr 27 21:56:29 localhost dhcpd:    you want, please write a subnet declaration
Apr 27 21:56:29 localhost dhcpd:    in your dhcpd.conf file for the network segment
Apr 27 21:56:29 localhost dhcpd:    to which interface enp3s0 is attached. **
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: Not configured to listen on any interfaces!
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: This version of ISC DHCP is based on the release available
Apr 27 21:56:29 localhost dhcpd: on ftp.isc.org.  Features have been added and other changes
Apr 27 21:56:29 localhost dhcpd: have been made to the base software release in order to make
Apr 27 21:56:29 localhost dhcpd: it work better with this distribution.
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: Please report for this software via the Gentoo Bugzilla site:
Apr 27 21:56:29 localhost dhcpd:     http://bugs.gentoo.org/
Apr 27 21:56:29 localhost dhcpd:
Apr 27 21:56:29 localhost dhcpd: exiting.

je ne comprend pas quel est le problème :idea:


Last edited by sdoudou306 on Sun May 04, 2014 7:05 am; edited 1 time in total
Back to top
View user's profile Send private message
XavierMiller
Moderator
Moderator


Joined: 23 Jul 2004
Posts: 5520
Location: ~Brussels - Belgique

PostPosted: Sun Apr 27, 2014 8:12 pm    Post subject: Reply with quote

As-tu configuré quelque chose à ce niveau ?

De quel paquet vient ce service, car il y en a plusieurs qui proposent dhcpcd.
_________________
Xavier Miller
(FR) Merci de respecter les règles du forum.
http://www.xaviermiller.be
Back to top
View user's profile Send private message
sdoudou306
n00b
n00b


Joined: 15 Mar 2014
Posts: 35

PostPosted: Sun Apr 27, 2014 8:32 pm    Post subject: Reply with quote

je ne me souvient pas car lors de mon installation j'ai eu plusieurs problème et il me semble avoir mis dev-lang/php mais je n'ai pas plus d'info
Back to top
View user's profile Send private message
USTruck
Guru
Guru


Joined: 21 Aug 2005
Posts: 421
Location: La Louviere (Belgique)

PostPosted: Mon Apr 28, 2014 6:02 am    Post subject: Re: Erreur du demarrage du service DHCP Reply with quote

sdoudou306 wrote:
bonjour après plusieurs tentative de réglage de mon fichier de configuration j'ai toujours la même erreur.
Code:

Apr 27 21:56:29 localhost dhcpd: No subnet declaration for enp3s0 (192.168.3.2).
Apr 27 21:56:29 localhost dhcpd: ** Ignoring requests on enp3s0.  If this is not what
Apr 27 21:56:29 localhost dhcpd:    you want, please write a subnet declaration
Apr 27 21:56:29 localhost dhcpd:    in your dhcpd.conf file for the network segment
Apr 27 21:56:29 localhost dhcpd:    to which interface enp3s0 is attached. **


Bonjour,

192.168.3.2 ... ip fixe ou recue par dhcp ?

ip recue par dhcp : revoir config de ton réseau, il est tjs préférable d'avoir une ip fixe pour un serveur

Pour le serveur DHCP, tu lance le serveur dhcp pas le client dhcp correct ?

Si serveur : revoir le fichier config dhcpd.conf pour assigner un range IP pour la carte enp3s0 ou lui indiquer la bonne carte a utiliser pour le serveur dhcp
Back to top
View user's profile Send private message
sdoudou306
n00b
n00b


Joined: 15 Mar 2014
Posts: 35

PostPosted: Thu May 01, 2014 12:49 pm    Post subject: Reply with quote

Bonjour mon serveur est en ip fixe.

voici mon fichier dhcpd.conf si quelqu’un à une idée de mon erreur:
Code:

# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#

# option definitions common to all supported networks...
#option domain-name "my_serveur";
#option domain-name-servers 192.168.3.21, 192.168.3.255;

#default-lease-time 600;
#max-lease-time 7200;

# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
#log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 192.168.3.2 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {
#  range 10.254.239.10 10.254.239.20;
#  option routers 192.168.3.1;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 192.168.3.2 netmask 255.255.255.224 {
#  range dynamic-bootp 192.168.4.1 192.168.5.255;
#  option broadcast-address 192.168.0.255;
#  option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 192.168.3.2 netmask 255.255.255.0 {
#  range 192.168.4.1 192.168.5.255;
#  option domain-name-servers ns1.loacalhost;
#  option domain-name "palmirawifi";
#  option routers 192.168.3.1;
#  option broadcast-address 192.168.0.255;
#  default-lease-time 600;
#  max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address fantasia.fugue.com;
#}

# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers rtr-224.example.org;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers rtr-29.example.org;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}
 

Merci de votre collaboration
Back to top
View user's profile Send private message
USTruck
Guru
Guru


Joined: 21 Aug 2005
Posts: 421
Location: La Louviere (Belgique)

PostPosted: Fri May 02, 2014 3:08 pm    Post subject: Reply with quote

Comment on configure ....
http://www.linux-france.org/prj/edu/archinet/systeme/ch28.html
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum