| View previous topic :: View next topic |
| Author |
Message |
Kurogane
n00b
Joined: 23 May 2010
Posts: 44
|
 Posted: Thu May 22, 2014 4:41 pm Post subject: Postfix setup |
 |
|
Hello,
I'm having a problem to install postix i just did clean install follow this guide http://wiki.gentoo.org/wiki/Postfix and when i try to start postfix give me this error.
| Code: | # /etc/init.d/postfix start
* Starting postfix ... [ !! ]
* ERROR: postfix failed to start |
the /var/log/maillog is empy so i'm not sure why fail to start. |
|
| Back to top |
|
 |
platojones
Veteran
Joined: 23 Oct 2002
Posts: 1602
Location: Just over the horizon
|
| Posted: Thu May 22, 2014 5:24 pm Post subject: |
|
|
You could try starting it with debug turned on:
| Code: | | /etc/init.d/postfix -d start |
|
|
| Back to top |
|
|
Kurogane
n00b
Joined: 23 May 2010
Posts: 44
|
| Posted: Thu May 22, 2014 5:35 pm Post subject: |
|
|
Same nothing to see the cause.
| Code: |
# /etc/init.d/postfix -d start
+ _conf_d=/etc/init.d/../conf.d
+ _c=postfix
+ '[' -n postfix -a postfix '!=' postfix ']'
+ unset _c
+ sourcex -e /etc/init.d/../conf.d/postfix.default
+ '[' -e = -e ']'
+ shift
+ '[' -e /etc/init.d/../conf.d/postfix.default ']'
+ return 1
+ sourcex -e /etc/init.d/../conf.d/postfix
+ '[' -e = -e ']'
+ shift
+ '[' -e /etc/init.d/../conf.d/postfix ']'
+ return 1
+ unset _conf_d
+ sourcex -e /etc/rc.conf
+ '[' -e = -e ']'
+ shift
+ '[' -e /etc/rc.conf ']'
+ . /etc/rc.conf
++ rc_shell=/sbin/sulogin
++ unicode=YES
++ rc_tty_number=12
+ '[' -n '' ']'
++ command -v cgroup_add_service
+ '[' cgroup_add_service = cgroup_add_service ']'
+ cgroup_add_service /sys/fs/cgroup/openrc
+ for d in '/sys/fs/cgroup/*'
+ '[' -f /sys/fs/cgroup/openrc/tasks ']'
+ openrc_cgroup=/sys/fs/cgroup/openrc
+ '[' -d /sys/fs/cgroup/openrc ']'
+ cgroup=/sys/fs/cgroup/openrc/postfix
+ mkdir -p /sys/fs/cgroup/openrc/postfix
+ '[' -f /sys/fs/cgroup/openrc/postfix/tasks ']'
+ cgroup_add_service /sys/fs/cgroup/systemd/system
+ for d in '/sys/fs/cgroup/*'
+ '[' -f /sys/fs/cgroup/openrc/tasks ']'
+ openrc_cgroup=/sys/fs/cgroup/openrc
+ '[' -d /sys/fs/cgroup/openrc ']'
+ cgroup=/sys/fs/cgroup/openrc/postfix
+ mkdir -p /sys/fs/cgroup/openrc/postfix
+ '[' -f /sys/fs/cgroup/openrc/postfix/tasks ']'
++ command -v cgroup_set_limits
+ '[' cgroup_set_limits = cgroup_set_limits ']'
+ cgroup_set_limits
+ local blkio=
+ '[' -n '' ']'
+ local cpu=
+ '[' -n '' ']'
+ local cpuacct=
+ '[' -n '' ']'
+ local cpuset=
+ '[' -n '' ']'
+ local devices=
+ '[' -n '' ']'
+ local memory=
+ '[' -n '' ']'
+ local net_prio=
+ '[' -n '' ']'
+ return 0
+ sourcex /etc/init.d/postfix
+ '[' /etc/init.d/postfix = -e ']'
+ . /etc/init.d/postfix
++ extra_started_commands='reload abort flush'
++ description_reload='Re-read configuration files. Running processes terminate at their earliest convenience.'
++ description_abort='Stop the Postfix mail system abruptly. Running processes are signaled to stop immediately.'
++ description_flush='Force delivery: attempt to deliver every message in the deferred mail queue.'
++ CONF_DIR=/etc/postfix
++ CONF_OPT=postfix
++ '[' -n postfix -a postfix '!=' postfix ']'
++ '[' /etc/postfix = /etc/postfix ']'
++ CONF_PARAM=
++ CONF_MESSAGE=
+ unset _d
+ unset _f
+ '[' -n '' ']'
+ '[' -n start ']'
+ '[' start = depend ']'
+ for _cmd in describe start stop status '${extra_commands:-$opts}' '$extra_started_commands' '$extra_stopped_commands'
+ '[' describe = start ']'
+ for _cmd in describe start stop status '${extra_commands:-$opts}' '$extra_started_commands' '$extra_stopped_commands'
+ '[' start = start ']'
++ command -v start
+ '[' start = start ']'
+ yesno
+ '[' -z '' ']'
+ return 1
+ for _cmd in '$extra_started_commands'
+ '[' reload = start ']'
+ for _cmd in '$extra_started_commands'
+ '[' abort = start ']'
+ for _cmd in '$extra_started_commands'
+ '[' flush = start ']'
+ for _cmd in '$extra_stopped_commands'
+ '[' cgroup_cleanup = start ']'
+ unset _cmd
+ case $1 in
+ verify_boot
+ '[' '!' -e /run/openrc/softlevel ']'
+ return 0
++ command -v start_pre
+ '[' '' = start_pre ']'
+ start
+ '[' '!' -z '' ']'
+ ebegin 'Starting postfix '
* Starting postfix ...
+ '[' '!' -d /etc/postfix ']'
+ /usr/sbin/postfix start
+ eend 1 [ !! ]
+ exit 1
* ERROR: postfix failed to start
|
|
|
| Back to top |
|
|
platojones
Veteran
Joined: 23 Oct 2002
Posts: 1602
Location: Just over the horizon
|
| Posted: Thu May 22, 2014 5:45 pm Post subject: |
|
|
Well, it is giving information, actually.
See what you get when you run this:
| Code: | | /usr/sbin/postfix check |
|
|
| Back to top |
|
|
Kurogane
n00b
Joined: 23 May 2010
Posts: 44
|
| Posted: Thu May 22, 2014 6:46 pm Post subject: |
|
|
| Code: |
# /usr/sbin/postfix check
postfix: fatal: chdir(/usr/lib64/postfix): No such file or directory
|
Looking for that i found this.
| Code: |
# eselect news list
News items:
[1] N 2010-02-21 MySQL 5.1 unmasking and upgrade procedures
[2] N 2010-03-25 Python 3.1
[3] N 2010-08-01 (2010-08-01-as-needed-default - removed?)
[4] N 2010-10-22 Perl 5.12 upgrade procedure
[5] N 2011-05-01 Baselayout update
[6] N 2011-10-15 Upgrade to libpng15
[7] N 2012-03-16 (2012-03-16-udev-181-unmasking - removed?)
[8] N 2012-04-24 The default JPEG implementation
[9] N 2012-05-21 Portage config-protect-if-modified default
[10] N 2012-07-23 Upgrading to postfix-2.9
[11] N 2012-09-09 (2012-09-09-make.conf-and-make.profile-move - removed?)
[12] N 2012-11-06 PYTHON_TARGETS deployment
[13] N 2013-01-23 (2013-01-23-udev-upgrade - removed?)
[14] N 2013-02-10 New 13.0 profiles and deprecation of 10.0 profiles
[15] N 2013-03-29 Upgrading udev to version >=200
[16] N 2013-06-07 Portage preserve-libs default
[17] N 2013-08-23 Language of messages in emerge logs and output
[18] N 2013-09-27 Separate /usr on Linux requires initramfs
[19] N 2013-11-07 python-exec package move
[20] N 2014-02-25 Upgrade to >=sys-fs/udev-210
|
| Code: |
# eselect news read 10
2012-07-23-upgrading-postfix
Title Upgrading to postfix-2.9
Author Eray Aslan <eras@gentoo.org>
Posted 2012-07-23
Revision 1
Daemons for >=mail-mta/postfix-2.9 are installed under
/usr/libexec/postfix. Please do not forget to adjust your main.cf by
running etc-update/dispatch-conf or similar and accepting the new
daemon_directory setting. Otherwise, postfix will not be able to find
the binaries it is looking for
|
2014, and still not "fixed" change that in main.cf? |
|
| Back to top |
|
|
platojones
Veteran
Joined: 23 Oct 2002
Posts: 1602
Location: Just over the horizon
|
| Posted: Thu May 22, 2014 6:53 pm Post subject: |
|
|
| It has been fixed in main.cf...you have to use etc-update or dispatch-conf to install the new configuration files. Just be aware, if you do install the latest though, it will overwrite you current main.cf. |
|
| Back to top |
|
|
|
Networking & Security
