Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
synaptics touchpad not working
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
aim nano
Tux's lil' helper
Tux's lil' helper


Joined: 20 Jan 2006
Posts: 115
Location: Jackson, MS

PostPosted: Sat Oct 26, 2013 5:30 am    Post subject: synaptics touchpad not working Reply with quote

i can't seem to get my touchpad working. i think evdev or synaptics is mistaking my touchscreen for my touchpad. i can click with my touchscreen, but that's about it (no right click or multitouch) and my touchpad is completely non-functioning.

i've never had any issues with synaptics before, so i'm at a loss

lsusb:

Code:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 06cb:5710 Synaptics, Inc.
Bus 001 Device 004: ID 04f3:0117 Elan Microelectronics Corp.
Bus 002 Device 003: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse
Bus 002 Device 004: ID 0483:91d1 STMicroelectronics
Bus 002 Device 005: ID 064e:c350 Suyin Corp.


lspci:

Code:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation UM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
01:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth



cat /usr/src/linux/.config | grep MOUSE

Code:

CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1366
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_USB_IDMOUSE is not set

_________________
Unanswered posts need love too.
--
~ # emerge -pv gentoo-love
Back to top
View user's profile Send private message
haarp
Guru
Guru


Joined: 31 Oct 2007
Posts: 366

PostPosted: Sat Oct 26, 2013 7:24 am    Post subject: Reply with quote

Also have a look at Xorg.0.log and run 'xinput'. Do you have INPUT_DEVICES=synaptics for x11-base/xorg-drivers?
Back to top
View user's profile Send private message
aim nano
Tux's lil' helper
Tux's lil' helper


Joined: 20 Jan 2006
Posts: 115
Location: Jackson, MS

PostPosted: Sat Oct 26, 2013 3:32 pm    Post subject: Reply with quote

haarp wrote:
Also have a look at Xorg.0.log and run 'xinput'. Do you have INPUT_DEVICES=synaptics for x11-base/xorg-drivers?


yes i have INPUT_DEVICE="synaptics evdev" globally in make.conf

i'll take a look at my xorg log and post any relevant info
_________________
Unanswered posts need love too.
--
~ # emerge -pv gentoo-love
Back to top
View user's profile Send private message
aim nano
Tux's lil' helper
Tux's lil' helper


Joined: 20 Jan 2006
Posts: 115
Location: Jackson, MS

PostPosted: Sun Oct 27, 2013 3:40 am    Post subject: Reply with quote

so it's seeing my touchscreen (and appears to be loading multitouch functionality) however i don't have multitouch functionality with it

also i see nothing being loaded about synaptics at all

any ideas?

Code:

[     5.535]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[     5.535] X Protocol Version 11, Revision 0
[     5.535] Build Operating System: Linux 3.11.6-gentoo x86_64 Gentoo
[     5.535] Current Operating System: Linux localhost 3.11.6-gentoo #5 SMP Thu Oct 24 20:12:08 CDT 2013 x86_64
[     5.535] Kernel command line: root=PARTUUID=bd0d18a7-ed64-418e-a36a-6b9c6f3104d1 init=/usr/lib/systemd/systemd
[     5.535] Build Date: 24 October 2013  11:08:24AM
[     5.535] 
[     5.535] Current version of pixman: 0.30.2
[     5.535]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[     5.535] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.536] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 26 17:15:15 2013
[     5.538] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.538] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.538] (==) No Layout section.  Using the first Screen section.
[     5.538] (==) No screen section available. Using defaults.
[     5.538] (**) |-->Screen "Default Screen Section" (0)
[     5.538] (**) |   |-->Monitor "<default monitor>"
[     5.539] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[     5.539] (==) Automatically adding devices
[     5.539] (==) Automatically enabling devices
[     5.539] (==) Automatically adding GPU devices
[     5.540] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[     5.540]    Entry deleted from font path.
[     5.540] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[     5.540]    Entry deleted from font path.
[     5.540] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     5.540]    Entry deleted from font path.
[     5.540] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     5.540]    Entry deleted from font path.
[     5.540] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[     5.540]    Entry deleted from font path.
[     5.540] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[     5.540]    Entry deleted from font path.
[     5.540] (==) FontPath set to:
   
[     5.540] (==) ModulePath set to "/usr/lib64/xorg/modules"
[     5.540] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.541] (II) Loader magic: 0x7fbbe0
[     5.541] (II) Module ABI versions:
[     5.541]    X.Org ANSI C Emulation: 0.4
[     5.541]    X.Org Video Driver: 14.1
[     5.541]    X.Org XInput driver : 19.1
[     5.541]    X.Org Server Extension : 7.0
[     5.541] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.543] (--) PCI:*(0:0:2:0) 8086:0166:103c:215a rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00003000/64
[     5.543] Initializing built-in extension Generic Event Extension
[     5.543] Initializing built-in extension SHAPE
[     5.543] Initializing built-in extension MIT-SHM
[     5.543] Initializing built-in extension XInputExtension
[     5.543] Initializing built-in extension XTEST
[     5.543] Initializing built-in extension BIG-REQUESTS
[     5.543] Initializing built-in extension SYNC
[     5.543] Initializing built-in extension XKEYBOARD
[     5.543] Initializing built-in extension XC-MISC
[     5.543] Initializing built-in extension XINERAMA
[     5.543] Initializing built-in extension XFIXES
[     5.543] Initializing built-in extension RENDER
[     5.543] Initializing built-in extension RANDR
[     5.543] Initializing built-in extension COMPOSITE
[     5.544] Initializing built-in extension DAMAGE
[     5.544] Initializing built-in extension MIT-SCREEN-SAVER
[     5.544] Initializing built-in extension DOUBLE-BUFFER
[     5.544] Initializing built-in extension RECORD
[     5.544] Initializing built-in extension DPMS
[     5.544] Initializing built-in extension X-Resource
[     5.544] Initializing built-in extension XVideo
[     5.544] Initializing built-in extension XVideo-MotionCompensation
[     5.544] Initializing built-in extension XFree86-VidModeExtension
[     5.544] Initializing built-in extension XFree86-DGA
[     5.544] Initializing built-in extension XFree86-DRI
[     5.544] Initializing built-in extension DRI2
[     5.544] (II) LoadModule: "glx"
[     5.551] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[     5.553] (II) Module glx: vendor="X.Org Foundation"
[     5.553]    compiled for 1.14.3, module version = 1.0.0
[     5.553]    ABI class: X.Org Server Extension, version 7.0
[     5.553] (==) AIGLX enabled
[     5.553] Loading extension GLX
[     5.553] (==) Matched intel as autoconfigured driver 0
[     5.553] (==) Matched intel as autoconfigured driver 1
[     5.553] (==) Matched vesa as autoconfigured driver 2
[     5.553] (==) Matched modesetting as autoconfigured driver 3
[     5.553] (==) Matched fbdev as autoconfigured driver 4
[     5.553] (==) Assigned the driver to the xf86ConfigLayout
[     5.553] (II) LoadModule: "intel"
[     5.553] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[     5.556] (II) Module intel: vendor="X.Org Foundation"
[     5.556]    compiled for 1.14.3, module version = 2.21.15
[     5.556]    Module class: X.Org Video Driver
[     5.556]    ABI class: X.Org Video Driver, version 14.1
[     5.556] (II) LoadModule: "vesa"
[     5.556] (WW) Warning, couldn't open module vesa
[     5.556] (II) UnloadModule: "vesa"
[     5.556] (II) Unloading vesa
[     5.556] (EE) Failed to load module "vesa" (module does not exist, 0)
[     5.556] (II) LoadModule: "modesetting"
[     5.557] (WW) Warning, couldn't open module modesetting
[     5.557] (II) UnloadModule: "modesetting"
[     5.557] (II) Unloading modesetting
[     5.557] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     5.557] (II) LoadModule: "fbdev"
[     5.557] (WW) Warning, couldn't open module fbdev
[     5.557] (II) UnloadModule: "fbdev"
[     5.557] (II) Unloading fbdev
[     5.557] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     5.557] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
   HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
   HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
   HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
   HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[     5.559] (++) using VT number 7

[     5.566] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[     5.566] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.566] (==) intel(0): RGB weight 888
[     5.566] (==) intel(0): Default visual is TrueColor
[     5.566] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[     5.566] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[     5.566] (**) intel(0): Framebuffer tiled
[     5.566] (**) intel(0): Pixmaps tiled
[     5.566] (**) intel(0): "Tear free" disabled
[     5.566] (**) intel(0): Forcing per-crtc-pixmaps? no
[     5.566] (II) intel(0): Output eDP1 has no monitor section
[     5.566] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[     5.566] (II) intel(0): Output VGA1 has no monitor section
[     5.567] (II) intel(0): Output HDMI1 has no monitor section
[     5.567] (II) intel(0): Output DP1 has no monitor section
[     5.567] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[     5.567] (--) intel(0): Output VGA1 using initial mode 1024x768 on pipe 1
[     5.567] (--) intel(0): Output HDMI1 using initial mode 1024x768 on pipe 2
[     5.567] (==) intel(0): DPI set to (96, 96)
[     5.567] (II) Loading sub module "dri2"
[     5.567] (II) LoadModule: "dri2"
[     5.567] (II) Module "dri2" already built-in
[     5.567] (==) Depth 24 pixmap format is 32 bpp
[     5.569] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[     5.569] (==) intel(0): Backing store disabled
[     5.569] (==) intel(0): Silken mouse enabled
[     5.569] (II) intel(0): HW Cursor enabled
[     5.569] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     5.576] (==) intel(0): DPMS enabled
[     5.576] (II) intel(0): [DRI2] Setup complete
[     5.576] (II) intel(0): [DRI2]   DRI driver: i965
[     5.576] (II) intel(0): direct rendering: DRI2 Enabled
[     5.576] (==) intel(0): hotplug detection: "enabled"
[     5.576] (--) RandR disabled
[     5.603] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     5.603] (II) AIGLX: enabled GLX_INTEL_swap_event
[     5.603] (II) AIGLX: enabled GLX_ARB_create_context
[     5.603] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     5.603] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     5.603] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     5.603] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     5.603] (II) AIGLX: Loaded and initialized i965
[     5.603] (II) GLX: Initialized DRI2 GL provider for screen 0
[     5.606] (II) intel(0): switch to mode 1366x768@60.0 on pipe 0 using eDP1, position (0, 0), rotation normal
[     5.613] (II) intel(0): switch to mode 1024x768@60.0 on pipe 1 using VGA1, position (0, 0), rotation normal
[     5.627] (II) intel(0): switch to mode 1024x768@60.0 on pipe 2 using HDMI1, position (0, 0), rotation normal
[     5.637] (II) intel(0): Setting screen physical size to 361 x 203
[     5.685] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     5.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.685] (**) Power Button: Applying InputClass "system-keyboard"
[     5.685] (II) LoadModule: "evdev"
[     5.685] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[     5.687] (II) Module evdev: vendor="X.Org Foundation"
[     5.687]    compiled for 1.14.3, module version = 2.8.1
[     5.687]    Module class: X.Org XInput Driver
[     5.687]    ABI class: X.Org XInput driver, version 19.1
[     5.687] (II) Using input driver 'evdev' for 'Power Button'
[     5.687] (**) Power Button: always reports core events
[     5.687] (**) evdev: Power Button: Device: "/dev/input/event2"
[     5.687] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.687] (--) evdev: Power Button: Found keys
[     5.687] (II) evdev: Power Button: Configuring as keyboard
[     5.687] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     5.687] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.687] (**) Option "xkb_rules" "evdev"
[     5.687] (**) Option "xkb_model" "pc104"
[     5.687] (**) Option "xkb_layout" "us"
[     5.719] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     5.719] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     5.719] (**) Video Bus: Applying InputClass "system-keyboard"
[     5.719] (II) Using input driver 'evdev' for 'Video Bus'
[     5.719] (**) Video Bus: always reports core events
[     5.719] (**) evdev: Video Bus: Device: "/dev/input/event3"
[     5.719] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     5.719] (--) evdev: Video Bus: Found keys
[     5.719] (II) evdev: Video Bus: Configuring as keyboard
[     5.719] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[     5.719] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.719] (**) Option "xkb_rules" "evdev"
[     5.719] (**) Option "xkb_model" "pc104"
[     5.719] (**) Option "xkb_layout" "us"
[     5.720] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.720] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.720] (**) Power Button: Applying InputClass "system-keyboard"
[     5.720] (II) Using input driver 'evdev' for 'Power Button'
[     5.720] (**) Power Button: always reports core events
[     5.720] (**) evdev: Power Button: Device: "/dev/input/event1"
[     5.720] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.720] (--) evdev: Power Button: Found keys
[     5.720] (II) evdev: Power Button: Configuring as keyboard
[     5.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[     5.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     5.720] (**) Option "xkb_rules" "evdev"
[     5.720] (**) Option "xkb_model" "pc104"
[     5.720] (**) Option "xkb_layout" "us"
[     5.721] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     5.721] (II) No input driver specified, ignoring this device.
[     5.721] (II) This device may have been added with another device file.
[     5.721] (II) config/udev: Adding drm device (/dev/dri/card0)
[     5.721] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event6)
[     5.721] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[     5.721] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[     5.721] (**) ELAN Touchscreen: always reports core events
[     5.721] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event6"
[     5.721] (II) evdev: ELAN Touchscreen: Using mtdev for this device
[     5.721] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x117
[     5.721] (--) evdev: ELAN Touchscreen: Found absolute axes
[     5.721] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[     5.721] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[     5.722] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[     5.722] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[     5.722] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[     5.722] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[     5.722] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     5.722] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6/event6"
[     5.722] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 9)
[     5.722] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[     5.722] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[     5.722] (**) ELAN Touchscreen: (accel) acceleration profile 0
[     5.722] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[     5.722] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[     5.723] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[     5.723] (II) No input driver specified, ignoring this device.
[     5.723] (II) This device may have been added with another device file.
[     5.723] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     5.723] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     5.723] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     5.723] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     5.723] (**) AT Translated Set 2 keyboard: always reports core events
[     5.723] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[     5.723] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     5.723] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     5.723] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     5.723] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     5.723] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     5.723] (**) Option "xkb_rules" "evdev"
[     5.723] (**) Option "xkb_model" "pc104"
[     5.723] (**) Option "xkb_layout" "us"
[     6.216] (II) intel(0): EDID vendor "GSM", prod id 1
[     6.217] (II) intel(0): Using EDID range info for horizontal sync
[     6.217] (II) intel(0): Using EDID range info for vertical refresh
[     6.217] (II) intel(0): Printing DDC gathered Modelines:
[     6.217] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[     6.217] (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     6.217] (II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[     6.217] (II) intel(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     6.217] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     6.217] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     6.217] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     6.217] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     6.217] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     6.217] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     6.217] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     6.217] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     6.217] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     6.217] (II) intel(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[     6.332] (II) intel(0): resizing framebuffer to 3414x768
[     6.336] (II) intel(0): switch to mode 1366x768@60.0 on pipe 0 using eDP1, position (0, 0), rotation normal
[     6.363] (II) intel(0): switch to mode 1024x768@60.0 on pipe 1 using VGA1, position (0, 0), rotation normal
[     6.379] (II) intel(0): switch to mode 1024x768@60.0 on pipe 2 using HDMI1, position (0, 0), rotation normal
[     6.389] (II) intel(0): switch to mode 1024x768@60.0 on pipe 1 using VGA1, position (1366, 0), rotation normal
[     6.389] (II) intel(0): switch to mode 1024x768@60.0 on pipe 2 using HDMI1, position (2390, 0), rotation normal
[    11.910] (II) intel(0): resizing framebuffer to 2390x768
[    11.911] (II) intel(0): switch to mode 1366x768@60.0 on pipe 0 using eDP1, position (0, 0), rotation normal
[    11.930] (II) intel(0): switch to mode 1024x768@60.0 on pipe 1 using VGA1, position (1366, 0), rotation normal
[    11.946] (II) intel(0): switch to mode 1024x768@60.0 on pipe 1 using HDMI1, position (1366, 0), rotation normal

_________________
Unanswered posts need love too.
--
~ # emerge -pv gentoo-love
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum