Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Cannot finish install [SOLVED]
View unanswered posts
View posts from last 24 hours

Goto page 1, 2, 3, 4  Next  
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Mon Sep 30, 2013 5:43 pm    Post subject: Cannot finish install [SOLVED] Reply with quote

Hi there!

I'm trying to install gentoo in dual boot on a notebook (core i3, 3GB Ram, win7) but I'm getting an error when I try to emerge "gentoo-sources".
I'm following each step from handbook (using a wired conection and amd64 minimal cd 20130816 iso); I've done it three times from scratch but it always hangs at the same point.
As I read in another topic, I'm using / and /boot in the same partition due to win 7 at /dev/sda1.

Am I missing something? Is the handbook so outdated?

The installation goes fine until the point of emerge gentoo-sources, but never comes beyond it.

Excuse me for my bad english and thanks for any help
_________________
“Long is the way, and hard, that out of hell leads up to light.”
― John Milton


Last edited by HerrSchafer on Wed Nov 13, 2013 12:26 pm; edited 4 times in total
Back to top
View user's profile Send private message
eyoung100
Veteran
Veteran


Joined: 23 Jan 2004
Posts: 1411

PostPosted: Mon Sep 30, 2013 6:42 pm    Post subject: Reply with quote

Can you print the exact error you are receiving after:
Code:
emerge gentoo-sources
:?:
_________________
The Birth and Growth of Science is the Death and Atrophy of Art -- Unknown
Registerd Linux User #363735
Adopt a Post | Strip Comments| Emerge Wrapper
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Mon Sep 30, 2013 6:46 pm    Post subject: Reply with quote

Is there any command for saving the information on the screen in to a file?

Anyway, I only can do it at home (I'm working now). I'll post it asap!
Thanks!
Back to top
View user's profile Send private message
eyoung100
Veteran
Veteran


Joined: 23 Jan 2004
Posts: 1411

PostPosted: Mon Sep 30, 2013 7:11 pm    Post subject: Reply with quote

Post /var/tmp/portage/sys-kernel/gentoo-sources/build.log IIRC
_________________
The Birth and Growth of Science is the Death and Atrophy of Art -- Unknown
Registerd Linux User #363735
Adopt a Post | Strip Comments| Emerge Wrapper
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Mon Sep 30, 2013 10:23 pm    Post subject: Reply with quote

Suggest: boot the cd to a network connection, mount the gentoo partitions, and enter the chroot:
nominally:
Code:
mount /dev/sda3 /mnt/gentoo
mount /dev/sda1 /mnt/gentoo/boot
cp -L /etc/resolv.conf /mnt/gentoo/etc/
mount -t proc none /mnt/gentoo/proc
mount --rbind /sys /mnt/gentoo/sys
mount --rbind /dev /mnt/gentoo/dev
chroot /mnt/gentoo /bin/bash
source /etc/profile
export PS1="(chroot) $PS1"
Then:
Code:
emerge wgetpaste
emerge gentoo-sources

the most common causes of the problem you report at that point in an install are: not being in the chroot; not having a network connection, not having a nameserver identified in /etc/resolv.conf.
if wgetpaste merges but gentoo-sources does not:
Code:
wgetpaste /var/tmp/portage/sys-kernel/gentoo-sources/temp/build.log
and post the url is the easiest way to provide the build log.
_________________
Defund the FCC.
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Tue Oct 01, 2013 12:43 am    Post subject: Reply with quote

eyoung100 wrote:
Post /var/tmp/portage/sys-kernel/gentoo-sources/build.log IIRC


I cannot find this file, booting from a live CD...

Code:
>>> Messages generated by process 25996 on 2013-09-30 16:54:17 AMT for package sys-devel/bc-1.06.95:

ERROR: compile
ERROR: sys-devel/bc-1.06.95::gentoo failed (compile phase):
  econf failed

Call stack:
         ebuild.sh, line   93:  Called src_compile
       environment, line 2455:  Called econf '--with-readline' '--without-libedit'
  phase-helpers.sh, line  521:  Called die
The specific snippet of code:
           die "econf failed"

If you need support, post the output of `emerge --info '=sys-devel/bc-1.06.95::gentoo'`,
the complete build log and the output of `emerge -pqv '=sys-devel/bc-1.06.95::gentoo'`.
The complete build log is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/build.log'.
The ebuild environment file is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/environment'.
Working directory: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'
S: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'


This is the error I got.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Tue Oct 01, 2013 12:49 am    Post subject: Reply with quote

boot the cd to a network connection, mount the gentoo partitions, run
Code:
wgetpaste /mnt/gentoo/var/tmp/portage/sys-devel/bc-1.06.95/temp/build.log
post the url returned
_________________
Defund the FCC.


Last edited by DONAHUE on Tue Oct 01, 2013 1:00 am; edited 2 times in total
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Tue Oct 01, 2013 12:51 am    Post subject: Reply with quote

DONAHUE wrote:

the most common causes of the problem you report at that point in an install are: not being in the chroot; not having a network connection, not having a nameserver identified in /etc/resolv.conf.


I was able to download the stage3 tarball, so I think my connection its ok... about chroot, the prompt has changed, so I think chroot was also ok..
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Tue Oct 01, 2013 1:01 am    Post subject: Reply with quote

Hard to understand
Code:
emerge gentoo-sources
trying to install:
Quote:
sys-devel/bc
Latest version available: 1.06.95
Latest version installed: 1.06.95
Size of files: 283 kB
Homepage: http://www.gnu.org/software/bc/bc.html
Description: Handy console-based calculator utility
License: GPL-2 LGPL-2.1


stage 3 download is done before entering the chroot. If entry to chroot is done correctly the connection is transferred for use in the chroot. do you remeber running emerge-webrsync when initially in the chroot?
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4635
Location: Saint Amant, Acadiana

PostPosted: Tue Oct 01, 2013 1:03 am    Post subject: Reply with quote

Code:
equery d bc
 * These packages depend on bc:
...
sys-kernel/gentoo-sources-3.11.0 (!build ? sys-devel/bc)
...

_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Tue Oct 01, 2013 1:17 am    Post subject: Reply with quote

logic failed me but equery here says

dev-libs/openssl-1.0.1e-r1 (test ? sys-devel/bc)
net-print/cups-filters-1.0.34-r1 (sys-devel/bc)
sys-apps/util-linux-2.22.2 (test ? sys-devel/bc)
sys-kernel/gentoo-sources-3.10.7 (!build ? sys-devel/bc)
sys-kernel/gentoo-sources-3.11.1 (!build ? sys-devel/bc)
sys-kernel/gentoo-sources-3.11.2 (!build ? sys-devel/bc)

so needed but not provided today???
built a new system two days ago with 3.11.1 and had no problem with this bc nonsense
_________________
Defund the FCC.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Tue Oct 01, 2013 1:18 am    Post subject: Reply with quote

nonetheless
boot the cd to a network connection, mount the gentoo partitions, run
Code:
wgetpaste /mnt/gentoo/var/tmp/portage/sys-devel/bc-1.06.95/temp/build.log
post the url returned
_________________
Defund the FCC.
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Tue Oct 01, 2013 2:11 am    Post subject: Reply with quote

Code:
 * Package:    sys-devel/bc-1.06.95
 * Repository: gentoo
 * Maintainer: base-system@gentoo.org
 * USE:        abi_x86_64 amd64 elibc_glibc kernel_linux multilib readline userland_GNU
 * FEATURES:   preserve-libs sandbox
>>> Unpacking source...
>>> Unpacking bc-1.06.95.tar.bz2 to /var/tmp/portage/sys-devel/bc-1.06.95/work
>>> Source unpacked in /var/tmp/portage/sys-devel/bc-1.06.95/work
>>> Compiling source in /var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95 ...
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --with-readline --without-libedit
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95/config.log
 * ERROR: sys-devel/bc-1.06.95 failed (compile phase):
 *   econf failed
 *
 * Call stack:
 *          ebuild.sh, line   93:  Called src_compile
 *        environment, line 2455:  Called econf '--with-readline' '--without-libedit'
 *   phase-helpers.sh, line  521:  Called die
 * The specific snippet of code:
 *            die "econf failed"
 *
 * If you need support, post the output of `emerge --info '=sys-devel/bc-1.06.95'`,
 * the complete build log and the output of `emerge -pqv '=sys-devel/bc-1.06.95'`.
 * The complete build log is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-devel/bc-1.06.95/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'
 * S: '/var/tmp/portage/sys-devel/bc-1.06.95/work/bc-1.06.95'


Yes, I remember of running
Code:
emerge-webrsync
.
I was able to to emerge "wgetpaste" but it has returned no url.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Tue Oct 01, 2013 2:28 am    Post subject: Reply with quote

from the chroot:

run
Code:
gcc-config  -l
should look like
Code:
gcc-config -l
 [1] x86_64-pc-linux-gnu-4.7.3 *
the * indicates a gcc is selected. if none is, example
Code:
 gcc-config 1
would set the first in the list as in example
Quote:
gcc-config 1
* Switching native-compiler to x86_64-pc-linux-gnu-4.7.3 ...
you may have another version

Quote:
I was able to to emerge "wgetpaste" but it has returned no url.
probably no build.log started
_________________
Defund the FCC.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Tue Oct 01, 2013 2:49 am    Post subject: Reply with quote

Followup:
if you succeeded in setting an active gcc, run
Code:
 emerge libtool
env-update
source /etc/profile
emerge gentoo-sources

_________________
Defund the FCC.
Back to top
View user's profile Send private message
chiefbag
Guru
Guru


Joined: 01 Oct 2010
Posts: 440
Location: The Kingdom of Kerry

PostPosted: Tue Oct 01, 2013 8:56 am    Post subject: Reply with quote

Quote:
Is there any command for saving the information on the screen in to a file?


You can use tee, for example below will print the output of the "ls" command to the file "screen_output.txt"

Code:
ls | tee screen_output.txt

_________________
A place for useful technical information
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Tue Oct 01, 2013 2:36 pm    Post subject: Reply with quote

chiefbag wrote:
You can use tee, for example below will print the output of the "ls" command to the file "screen_output.txt"


Great! So, if I do something like:

Code:
emerge foo | tee foo_log.txt


Will I get all the info I see on the screen saved? Thanks! It helps a lot!


Off topic: gentoo is quite harder than other distros...
Back to top
View user's profile Send private message
chiefbag
Guru
Guru


Joined: 01 Oct 2010
Posts: 440
Location: The Kingdom of Kerry

PostPosted: Tue Oct 01, 2013 4:00 pm    Post subject: Reply with quote

Quote:


Great! So, if I do something like:

Code:
emerge foo | tee foo_log.txt


Will I get all the info I see on the screen saved? Thanks! It helps a lot!


You would need to do something like below:


Code:
emerge foo  2>&1 | tee foo_log.txt

_________________
A place for useful technical information
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Wed Oct 02, 2013 12:38 am    Post subject: Reply with quote

DONAHUE wrote:
Followup:
if you succeeded in setting an active gcc, run
Code:
 emerge libtool
env-update
source /etc/profile
emerge gentoo-sources


The version of my gcc was 4.6.2 and the profile was was set.

Another error while emerging libtool:
Code:

 * IMPORTANT: 2 config files in '/etc/portage' need updating.
Calculating dependencies 
 * IMPORTANT: 6 news items need reading for repository 'gentoo'.
 * Use eselect news to read news items.

 * See the CONFIGURATION FILES section of the emerge
 * man page to learn how to update config files.
... done!

>>> Verifying ebuild manifests

>>> Emerging (1 of 1) sys-devel/libtool-2.4.2
 * libtool-2.4.2.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ...             [ ok ]
>>> Unpacking source...
>>> Unpacking libtool-2.4.2.tar.xz to /var/tmp/portage/sys-devel/libtool-2.4.2/work
>>> Source unpacked in /var/tmp/portage/sys-devel/libtool-2.4.2/work
>>> Preparing source in /var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2 ...
 * Applying libtool-1.5.20-use-linux-version-in-fbsd.patch ...
 [ ok ]
 * Running eautoreconf in '/var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2/libltdl' ...
 * Running true --install --copy --force --automake ...
 [ ok ]
 * Running aclocal -I m4 ...
 [ ok ]
 * Running autoconf ...
 [ ok ]
 * Running autoheader ...
 [ ok ]
 * Running automake --add-missing --copy --foreign ...
 [ ok ]
 * Running eautoreconf in '/var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2' ...
 * Running true --install --copy --force --automake ...
 [ ok ]
 * Running aclocal -I libltdl/m4 ...
 [ ok ]
 * Running autoconf ...
 [ ok ]
 * Running autoheader ...
 [ ok ]
 * Running automake --add-missing --copy ...
 [ ok ]
 * Removing useless C++ checks ...
 [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2 ...
 * econf: updating libtool-2.4.2/libltdl/config/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating libtool-2.4.2/libltdl/config/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --disable-static
## ------------------------- ##
## Configuring libtool 2.4.2 ##
## ------------------------- ##

checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
configure: autobuild project... GNU Libtool
configure: autobuild revision... 2.4.2 ()
configure: autobuild hostname... livecd
configure: autobuild mode... default
configure: autobuild timestamp... 20131001T212622Z
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking whether the C compiler works... no
configure: error: in `/var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2':
configure: error: C compiler cannot create executables
See `config.log' for more details

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2/config.log
 * ERROR: sys-devel/libtool-2.4.2::gentoo failed (configure phase):
 *   econf failed
 *
 * Call stack:
 *          ebuild.sh, line   93:  Called src_configure
 *        environment, line 3071:  Called econf '--disable-static'
 *   phase-helpers.sh, line  521:  Called die
 * The specific snippet of code:
 *            die "econf failed"
 *
 * If you need support, post the output of `emerge --info '=sys-devel/libtool-2.4.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-devel/libtool-2.4.2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-devel/libtool-2.4.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-devel/libtool-2.4.2/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2'
 * S: '/var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2'

>>> Failed to emerge sys-devel/libtool-2.4.2, Log file:

>>>  '/var/tmp/portage/sys-devel/libtool-2.4.2/temp/build.log'
 * Messages for package sys-devel/libtool-2.4.2:
 * ERROR: sys-devel/libtool-2.4.2::gentoo failed (configure phase):
 *   econf failed
 *
 * Call stack:
 *          ebuild.sh, line   93:  Called src_configure
 *        environment, line 3071:  Called econf '--disable-static'
 *   phase-helpers.sh, line  521:  Called die
 * The specific snippet of code:
 *            die "econf failed"
 *
 * If you need support, post the output of `emerge --info '=sys-devel/libtool-2.4.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-devel/libtool-2.4.2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-devel/libtool-2.4.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-devel/libtool-2.4.2/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2'
 * S: '/var/tmp/portage/sys-devel/libtool-2.4.2/work/libtool-2.4.2'


_________________
“Long is the way, and hard, that out of hell leads up to light.”
― John Milton
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Wed Oct 02, 2013 1:26 am    Post subject: Reply with quote

boot the cd
mount the gentoo partitions
run
Code:
ls /mnt/gentoo/stage*  | wgetpaste
wgetpaste /mnt/gentoo/etc/portage/make.conf
wgetpaste /mnt/gentoo/proc/cpuinfo

post url's returned
Last time I ran a minimal install IIRC, it had wgetpaste, if not post results
Code:
ls /mnt/gentoo/stage*
cat /mnt/gentoo/etc/portage/make.conf
cat /mnt/gentoo/proc/cpuinfo

_________________
Defund the FCC.
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Wed Oct 02, 2013 2:12 am    Post subject: Reply with quote

DONAHUE wrote:
boot the cd
mount the gentoo partitions
run
Code:
ls /mnt/gentoo/stage*  | wgetpaste
wgetpaste /mnt/gentoo/etc/portage/make.conf
wgetpaste /mnt/gentoo/proc/cpuinfo


Here it is:
http://bpaste.net/show/137121
http://bpaste.net/show/137122
http://bpaste.net/show/137123
_________________
“Long is the way, and hard, that out of hell leads up to light.”
― John Milton
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Wed Oct 02, 2013 2:36 am    Post subject: Reply with quote

The problem is in /etc/make.conf:
Quote:
CFLAGS="-mtnue=native -O2 -pipe"
spelling of -mtune, but recommend
Quote:
CFLAGS="-march=native -O2 -pipe"
as I can not vouch for -mtune="native"
_________________
Defund the FCC.
Back to top
View user's profile Send private message
HerrSchafer
Tux's lil' helper
Tux's lil' helper


Joined: 18 May 2011
Posts: 85

PostPosted: Wed Oct 02, 2013 2:15 pm    Post subject: Reply with quote

@DONAHUE:

Each attempt of installing gentoo is made from scratch, due to my windows needs (I use it at my job); so, I install Ubuntu to get grub working and be able to use windows. (by the way, how can I make windows partition bootable after removing linux?)
The last time I tried, I was concerned that if the error was a compiling error, something could be wrong in the make.conf file; so, I changed MAKEOPTS to a small value and used mtune (wich you saw the spelling) instead march but I got the same error.
_________________
“Long is the way, and hard, that out of hell leads up to light.”
― John Milton
Back to top
View user's profile Send private message
creaker
Guru
Guru


Joined: 14 Jul 2012
Posts: 550

PostPosted: Wed Oct 02, 2013 2:59 pm    Post subject: Reply with quote

HerrSchafer wrote:
(by the way, how can I make windows partition bootable after removing linux?)

you can boot it from grub shell. Boot from bootable usb (with grub as loader) and switch to the shell. Of course, you should know your partitions layout. Another option - to make a bootable usb stick with grub installed.
http://askubuntu.com/questions/180023/can-i-install-grub-on-an-usb-and-make-it-a-rescue-disk
_________________
Intel Core i3-2120 / 4Gb RAM / 250Gb HDD / NVidia GeForce-550Ti
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6507
Location: Goose Creek SC

PostPosted: Wed Oct 02, 2013 3:00 pm    Post subject: Reply with quote

Which version of windows is installed?
Are you dealing with UEFI or legacy BIOS?
What is the make and model of the computer you are installing on?
You were dual booting Ubuntu and windows and decided to replace ubuntu with gentoo?
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Goto page 1, 2, 3, 4  Next
Page 1 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum