View previous topic :: View next topic |
Author |
Message |
spysz n00b
Joined: 21 Apr 2007 Posts: 15 Location: Kraków
|
Posted: Thu Sep 12, 2013 6:26 am Post subject: [SOLVED] dhcpcd - failed renew |
|
|
Hi,
Can anyone tell me what cause this errors?
dhcpcd[2630]: eth0: failed to renew DHCP, rebinding
dhcpcd[2630]: eth0: failed to renew DHCP, rebinding
dhcpcd[2630]: eth0: failed to renew DHCP, rebinding
dhcpcd[2630]: eth0: failed to renew DHCP, rebinding
and so on and so forth...
Gentoo is working on XenServer, also Vyatta as dhcp server. First get IP (after reboot) is OK, but renew address after expired leases gives this errors.
Any suggestion?
I tried use dhclient but also has similar problem:
DHCPREQUEST on eth0 to 192.168.1.1 port 67
DHCPREQUEST on eth0 to 192.168.1.1 port 67
DHCPREQUEST on eth0 to 192.168.1.1 port 67
DHCPREQUEST on eth0 to 192.168.1.1 port 67
DHCPREQUEST on eth0 to 192.168.1.1 port 67
and so on and so forth...
Some people suggest turn off tx and rx checksum on VIF, but it does not resolve the problem.
Regards,
Simon
Last edited by spysz on Thu Sep 12, 2013 8:38 pm; edited 1 time in total |
|
Back to top |
|
|
UberLord Retired Dev
Joined: 18 Sep 2003 Posts: 6835 Location: Blighty
|
|
Back to top |
|
|
spysz n00b
Joined: 21 Apr 2007 Posts: 15 Location: Kraków
|
Posted: Thu Sep 12, 2013 8:38 pm Post subject: |
|
|
UberLord wrote: | Generally this is caused by the DHCP server not supplying a direct route to it and RFC2131 specifies that RENEWs must be unicast rather than broadcast.
So it's not a client issue as such, more of a server one.
The good news is that you'll rebind fine in this normally. |
Hi,
I resolve this problem. I turned off tx checksum on interface. Now it is working perfect!
Regards,
Simon |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|