Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Nouveau and 3.11 = No X
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
kiksen
Guru
Guru


Joined: 24 Jun 2002
Posts: 396
Location: Denmark

PostPosted: Fri Sep 06, 2013 7:57 am    Post subject: Nouveau and 3.11 = No X Reply with quote

Hi.

I have issues with 3.11 and nouveau, and can't seem to find a workaround. Maybe someone has suggestions.

When booting on 3.11 dmesg says:
[ 1.116588] [drm] Initialized drm 1.1.0 20060810
[ 1.116731] MXM: GUID detected in BIOS
[ 1.117104] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 1.117217] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 1.117330] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 1.118322] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 1.194400] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 1.194513] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 1.194712] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 1.194825] nouveau [ VBIOS][0000:03:00.0] version 70.08.b1.00.00
[ 1.195424] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 1.195587] nouveau [ PFB][0000:03:00.0] RAM size: 1024 MiB
[ 1.195752] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 1.219716] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 1.219884] nouveau [ PTHERM][0000:03:00.0] fan management: disabled
[ 1.220052] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 1.222093] [TTM] Zone kernel: Available graphics memory: 16423786 kiB
[ 1.222258] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.222422] [TTM] Initializing pool allocator
[ 1.222588] [TTM] Initializing DMA pool allocator
[ 1.222756] nouveau [ DRM] VRAM: 1024 MiB
[ 1.222917] nouveau [ DRM] GART: 1048576 MiB
[ 1.223085] nouveau [ DRM] TMDS table version 2.0
[ 1.223247] nouveau [ DRM] DCB version 4.0
[ 1.223436] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 1.223600] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 1.223764] nouveau [ DRM] DCB outp 02: 04011310 00020030
[ 1.223927] nouveau [ DRM] DCB outp 03: 08022392 00020020
[ 1.224095] nouveau [ DRM] DCB conn 00: 00001030
[ 1.224323] nouveau [ DRM] DCB conn 01: 00000100
[ 1.224576] nouveau [ DRM] DCB conn 02: 00002261
[ 1.225669] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.225861] [drm] No driver support for vblank timestamp query.
[ 1.226267] nouveau [ DRM] 3 available performance level(s)
[ 1.226433] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 900mV
[ 1.226689] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 324MHz voltage 1000mV
[ 1.226971] nouveau [ DRM] 3: core 810MHz shader 1620MHz memory 900MHz voltage 1100mV
[ 1.227233] nouveau [ DRM] c: core 405MHz shader 810MHz memory 324MHz voltage 1000mV
[ 1.230465] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 1.340135] nouveau E[ PBUS][0000:03:00.0] MMIO write of 0x00000401 FAULT at 0x002010 [ IBUS TIMEOUT ]
[ 1.340565] nouveau E[ PMC][0000:03:00.0] unknown intr 0xffffffff
[ 1.372719] nouveau [ DRM] allocated 1920x1200 fb: 0x60000, bo ffff880819bcf400
[ 1.373067] fbcon: nouveaufb (fb0) is primary device
[ 1.619439] nouveau E[ DRM] GPU lockup - switching to software fbcon

Which is not good. The GPU lockup disappears if i add nouveau.nofbaccell=1 to the kernel command line, but the behaviour is the same - no X (never gets to a login prompt and slim log says: slim: waiting for X server to begin accepting connections.

Xorg.0.log says:
[ 14.556]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 14.556]
X.Org X Server 1.14.2.902 (1.14.3 RC 2)
Release Date: 2013-08-22
[ 14.556] X Protocol Version 11, Revision 0
[ 14.556] Build Operating System: Linux 3.10.10-gentoo x86_64 Gentoo
[ 14.556] Current Operating System: Linux ziow 3.11.0-gentoo #2 SMP PREEMPT Thu Sep 5 12:03:18 CEST 2013 x86_64
[ 14.556] Kernel command line: BOOT_IMAGE=/kernel-3.11.0-gentoo root=/dev/sda3 ro pcie_aspm=off nouveau.nofbaccel=1
[ 14.556] Build Date: 05 September 2013 08:20:16AM
[ 14.556]
[ 14.556] Current version of pixman: 0.30.2
[ 14.556] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.556] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.556] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 6 09:38:03 2013
[ 14.557] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14.557] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.558] (==) No Layout section. Using the first Screen section.
[ 14.558] (==) No screen section available. Using defaults.
[ 14.558] (**) |-->Screen "Default Screen Section" (0)
[ 14.558] (**) | |-->Monitor "<default monitor>"
[ 14.558] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.558] (==) Automatically adding devices
[ 14.558] (==) Automatically enabling devices
[ 14.558] (==) Automatically adding GPU devices
[ 14.562] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14.562] Entry deleted from font path.
[ 14.563] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14.563] Entry deleted from font path.
[ 14.563] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14.563] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14.563] Entry deleted from font path.
[ 14.563] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14.563] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 14.563] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 14.563] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.563] (II) Loader magic: 0x802c00
[ 14.563] (II) Module ABI versions:
[ 14.563] X.Org ANSI C Emulation: 0.4
[ 14.563] X.Org Video Driver: 14.1
[ 14.563] X.Org XInput driver : 19.1
[ 14.563] X.Org Server Extension : 7.0
[ 14.563] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14.565] (--) PCI:*(0:3:0:0) 10de:0f00:1043:8436 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/524288
[ 14.565] Initializing built-in extension Generic Event Extension
[ 14.565] Initializing built-in extension SHAPE
[ 14.565] Initializing built-in extension MIT-SHM
[ 14.565] Initializing built-in extension XInputExtension
[ 14.565] Initializing built-in extension XTEST
[ 14.565] Initializing built-in extension BIG-REQUESTS
[ 14.565] Initializing built-in extension SYNC
[ 14.565] Initializing built-in extension XKEYBOARD
[ 14.565] Initializing built-in extension XC-MISC
[ 14.565] Initializing built-in extension XINERAMA
[ 14.565] Initializing built-in extension XFIXES
[ 14.565] Initializing built-in extension RENDER
[ 14.565] Initializing built-in extension RANDR
[ 14.565] Initializing built-in extension COMPOSITE
[ 14.565] Initializing built-in extension DAMAGE
[ 14.565] Initializing built-in extension MIT-SCREEN-SAVER
[ 14.565] Initializing built-in extension DOUBLE-BUFFER
[ 14.565] Initializing built-in extension RECORD
[ 14.565] Initializing built-in extension DPMS
[ 14.565] Initializing built-in extension X-Resource
[ 14.565] Initializing built-in extension XVideo
[ 14.565] Initializing built-in extension XVideo-MotionCompensation
[ 14.565] Initializing built-in extension XFree86-VidModeExtension
[ 14.565] Initializing built-in extension XFree86-DGA
[ 14.565] Initializing built-in extension XFree86-DRI
[ 14.565] Initializing built-in extension DRI2
[ 14.565] (II) LoadModule: "glx"
[ 14.568] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 14.569] (II) Module glx: vendor="X.Org Foundation"
[ 14.569] compiled for 1.14.2.902, module version = 1.0.0
[ 14.569] ABI class: X.Org Server Extension, version 7.0
[ 14.569] (==) AIGLX enabled
[ 14.569] Loading extension GLX
[ 14.569] (==) Matched nouveau as autoconfigured driver 0
[ 14.569] (==) Matched nv as autoconfigured driver 1
[ 14.569] (==) Matched nouveau as autoconfigured driver 2
[ 14.569] (==) Matched nv as autoconfigured driver 3
[ 14.569] (==) Matched vesa as autoconfigured driver 4
[ 14.569] (==) Matched modesetting as autoconfigured driver 5
[ 14.569] (==) Matched fbdev as autoconfigured driver 6
[ 14.569] (==) Assigned the driver to the xf86ConfigLayout
[ 14.569] (II) LoadModule: "nouveau"
[ 14.570] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 14.571] (II) Module nouveau: vendor="X.Org Foundation"
[ 14.571] compiled for 1.14.2.902, module version = 1.0.9
[ 14.571] Module class: X.Org Video Driver
[ 14.571] ABI class: X.Org Video Driver, version 14.1
[ 14.571] (II) LoadModule: "nv"
[ 14.571] (WW) Warning, couldn't open module nv
[ 14.571] (II) UnloadModule: "nv"
[ 14.571] (II) Unloading nv
[ 14.571] (EE) Failed to load module "nv" (module does not exist, 0)
[ 14.571] (II) LoadModule: "vesa"
[ 14.571] (WW) Warning, couldn't open module vesa
[ 14.571] (II) UnloadModule: "vesa"
[ 14.571] (II) Unloading vesa
[ 14.571] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 14.571] (II) LoadModule: "modesetting"
[ 14.572] (WW) Warning, couldn't open module modesetting
[ 14.572] (II) UnloadModule: "modesetting"
[ 14.572] (II) Unloading modesetting
[ 14.572] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 14.572] (II) LoadModule: "fbdev"
[ 14.572] (WW) Warning, couldn't open module fbdev
[ 14.572] (II) UnloadModule: "fbdev"
[ 14.572] (II) Unloading fbdev
[ 14.572] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 14.572] (II) NOUVEAU driver
[ 14.572] (II) NOUVEAU driver for NVIDIA chipset families :
[ 14.572] RIVA TNT (NV04)
[ 14.572] RIVA TNT2 (NV05)
[ 14.572] GeForce 256 (NV10)
[ 14.572] GeForce 2 (NV11, NV15)
[ 14.572] GeForce 4MX (NV17, NV18)
[ 14.572] GeForce 3 (NV20)
[ 14.572] GeForce 4Ti (NV25, NV28)
[ 14.572] GeForce FX (NV3x)
[ 14.572] GeForce 6 (NV4x)
[ 14.572] GeForce 7 (G7x)
[ 14.572] GeForce 8 (G8x)
[ 14.572] GeForce GTX 200 (NVA0)
[ 14.572] GeForce GTX 400 (NVC0)
[ 14.572] (++) using VT number 7

[ 14.576] (II) [drm] nouveau interface version: 1.1.1
[ 14.576] (II) Loading sub module "dri2"
[ 14.576] (II) LoadModule: "dri2"
[ 14.576] (II) Module "dri2" already built-in
[ 14.576] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
[ 14.576] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.576] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 14.576] (==) NOUVEAU(0): RGB weight 888
[ 14.576] (==) NOUVEAU(0): Default visual is TrueColor
[ 14.576] (==) NOUVEAU(0): Using HW cursor
[ 14.576] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 14.576] (==) NOUVEAU(0): Page flipping enabled
[ 14.576] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 14.615] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 14.636] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 14.638] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 14.675] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 14.675] (II) NOUVEAU(0): Manufacturer: ENC Model: 1996 Serial#: 16843009
[ 14.675] (II) NOUVEAU(0): Year: 2009 Week: 51
[ 14.675] (II) NOUVEAU(0): EDID Version: 1.3
[ 14.675] (II) NOUVEAU(0): Digital Display Input
[ 14.675] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 33
[ 14.675] (II) NOUVEAU(0): Gamma: 2.20
[ 14.675] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 14.675] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.675] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 14.675] (II) NOUVEAU(0): redX: 0.650 redY: 0.337 greenX: 0.296 greenY: 0.604
[ 14.675] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
[ 14.675] (II) NOUVEAU(0): Supported established timings:
[ 14.675] (II) NOUVEAU(0): 720x400@70Hz
[ 14.675] (II) NOUVEAU(0): 640x480@60Hz
[ 14.675] (II) NOUVEAU(0): 800x600@60Hz
[ 14.675] (II) NOUVEAU(0): 1024x768@60Hz
[ 14.675] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 14.675] (II) NOUVEAU(0): Supported standard timings:
[ 14.675] (II) NOUVEAU(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 14.675] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.675] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 14.675] (II) NOUVEAU(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 14.675] (II) NOUVEAU(0): Supported detailed timing:
[ 14.675] (II) NOUVEAU(0): clock: 154.0 MHz Image Size: 519 x 324 mm
[ 14.675] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 14.675] (II) NOUVEAU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 14.675] (II) NOUVEAU(0): Serial No: 40883129
[ 14.675] (II) NOUVEAU(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 76 kHz, PixClock max 175 MHz
[ 14.675] (II) NOUVEAU(0): Monitor name: S2402W
[ 14.675] (II) NOUVEAU(0): EDID (in hex):
[ 14.675] (II) NOUVEAU(0): 00ffffffffffff0015c3961901010101
[ 14.675] (II) NOUVEAU(0): 3313010380342178ea9ef5a6564b9a25
[ 14.675] (II) NOUVEAU(0): 125054a10800a94081808140b3000101
[ 14.675] (II) NOUVEAU(0): 010101010101283c80a070b023403020
[ 14.675] (II) NOUVEAU(0): 360007442100001a000000ff00343038
[ 14.675] (II) NOUVEAU(0): 38333132390a20202020000000fd003b
[ 14.675] (II) NOUVEAU(0): 3d1f4c11000a202020202020000000fc
[ 14.675] (II) NOUVEAU(0): 005332343032570a202020202020006a
[ 14.675] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 14.675] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 14.675] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.696] (II) NOUVEAU(0): EDID for output VGA-1
[ 14.699] (II) NOUVEAU(0): EDID for output HDMI-1
[ 14.699] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 14.699] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 14.699] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 14.699] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 14.699] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1200
[ 14.699] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 14.699] (--) NOUVEAU(0): Virtual size is 1920x1200 (pitch 0)
[ 14.699] (**) NOUVEAU(0): Driver mode "1920x1200": 154.0 MHz (scaled from 0.0 MHz), 74.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 14.699] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.699] (==) NOUVEAU(0): DPI set to (96, 96)
[ 14.699] (II) Loading sub module "fb"
[ 14.699] (II) LoadModule: "fb"
[ 14.699] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 14.700] (II) Module fb: vendor="X.Org Foundation"
[ 14.700] compiled for 1.14.2.902, module version = 1.0.0
[ 14.700] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.700] (II) Loading sub module "exa"
[ 14.700] (II) LoadModule: "exa"
[ 14.700] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 14.700] (II) Module exa: vendor="X.Org Foundation"
[ 14.700] compiled for 1.14.2.902, module version = 2.6.0
[ 14.700] ABI class: X.Org Video Driver, version 14.1
[ 14.700] (II) Loading sub module "shadowfb"
[ 14.700] (II) LoadModule: "shadowfb"
[ 14.701] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 14.701] (II) Module shadowfb: vendor="X.Org Foundation"
[ 14.701] compiled for 1.14.2.902, module version = 1.0.0
[ 14.701] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.701] (--) Depth 24 pixmap format is 32 bpp
[ 14.702] (II) NOUVEAU(0): Opened GPU channel 0
[ 14.797] (II) NOUVEAU(0): [DRI2] Setup complete
[ 14.797] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 14.797] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 14.798] (II) EXA(0): Driver allocated offscreen pixmaps
[ 14.798] (II) EXA(0): Driver registered support for the following operations:
[ 14.798] (II) Solid
[ 14.798] (II) Copy
[ 14.798] (II) Composite (RENDER acceleration)
[ 14.798] (II) UploadToScreen
[ 14.798] (II) DownloadFromScreen
[ 14.798] (==) NOUVEAU(0): Backing store disabled
[ 14.798] (==) NOUVEAU(0): Silken mouse enabled
[ 14.798] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 14.798] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 14.798] (==) NOUVEAU(0): DPMS enabled
[ 14.798] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.799] (--) RandR disabled
[ 16.838] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.838] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.838] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.838] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.838] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 16.838] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.838] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.839] (II) AIGLX: Loaded and initialized nouveau
[ 16.839] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 31.839] (II) NOUVEAU(0): NVEnterVT is called.
[ 31.862] (II) NOUVEAU(0): Setting screen physical size to 508 x 317
[ 31.862] resize called 1920 1200
[ 31.899] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 31.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.899] (**) Power Button: Applying InputClass "keyboard-all"
[ 31.899] (II) LoadModule: "evdev"
[ 31.899] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 31.900] (II) Module evdev: vendor="X.Org Foundation"
[ 31.900] compiled for 1.14.2.902, module version = 2.8.1
[ 31.900] Module class: X.Org XInput Driver
[ 31.900] ABI class: X.Org XInput driver, version 19.1
[ 31.900] (II) Using input driver 'evdev' for 'Power Button'
[ 31.900] (**) Power Button: always reports core events
[ 31.900] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 31.900] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.900] (--) evdev: Power Button: Found keys
[ 31.900] (II) evdev: Power Button: Configuring as keyboard
[ 31.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 31.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.900] (**) Option "xkb_rules" "evdev"
[ 31.900] (**) Option "xkb_model" "pc104"
[ 31.900] (**) Option "xkb_layout" "dk"
[ 31.900] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.915] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 31.915] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.915] (**) Power Button: Applying InputClass "keyboard-all"
[ 31.915] (II) Using input driver 'evdev' for 'Power Button'
[ 31.915] (**) Power Button: always reports core events
[ 31.915] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 31.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.915] (--) evdev: Power Button: Found keys
[ 31.915] (II) evdev: Power Button: Configuring as keyboard
[ 31.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 31.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 31.915] (**) Option "xkb_rules" "evdev"
[ 31.915] (**) Option "xkb_model" "pc104"
[ 31.915] (**) Option "xkb_layout" "dk"
[ 31.915] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.916] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 31.916] (II) config/udev: Adding input device daskeyboard (/dev/input/event2)
[ 31.916] (**) daskeyboard: Applying InputClass "evdev keyboard catchall"
[ 31.916] (**) daskeyboard: Applying InputClass "keyboard-all"
[ 31.916] (II) Using input driver 'evdev' for 'daskeyboard'
[ 31.916] (**) daskeyboard: always reports core events
[ 31.916] (**) evdev: daskeyboard: Device: "/dev/input/event2"
[ 31.916] (--) evdev: daskeyboard: Vendor 0x4d9 Product 0x2013
[ 31.916] (--) evdev: daskeyboard: Found keys
[ 31.916] (II) evdev: daskeyboard: Configuring as keyboard
[ 31.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2/event2"
[ 31.916] (II) XINPUT: Adding extended input device "daskeyboard" (type: KEYBOARD, id 8)
[ 31.916] (**) Option "xkb_rules" "evdev"
[ 31.916] (**) Option "xkb_model" "pc104"
[ 31.916] (**) Option "xkb_layout" "dk"
[ 31.916] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.916] (II) config/udev: Adding input device daskeyboard (/dev/input/event3)
[ 31.916] (**) daskeyboard: Applying InputClass "evdev keyboard catchall"
[ 31.916] (**) daskeyboard: Applying InputClass "keyboard-all"
[ 31.916] (II) Using input driver 'evdev' for 'daskeyboard'
[ 31.916] (**) daskeyboard: always reports core events
[ 31.916] (**) evdev: daskeyboard: Device: "/dev/input/event3"
[ 31.916] (--) evdev: daskeyboard: Vendor 0x4d9 Product 0x2013
[ 31.916] (--) evdev: daskeyboard: Found keys
[ 31.916] (II) evdev: daskeyboard: Configuring as keyboard
[ 31.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3/event3"
[ 31.916] (II) XINPUT: Adding extended input device "daskeyboard" (type: KEYBOARD, id 9)
[ 31.916] (**) Option "xkb_rules" "evdev"
[ 31.916] (**) Option "xkb_model" "pc104"
[ 31.916] (**) Option "xkb_layout" "dk"
[ 31.916] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.917] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event4)
[ 31.917] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 31.917] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[ 31.917] (**) Logitech USB Laser Mouse: always reports core events
[ 31.917] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event4"
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc069
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[ 31.917] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[ 31.917] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[ 31.917] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 31.917] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.917] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.0/input/input4/event4"
[ 31.917] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 10)
[ 31.917] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[ 31.917] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 31.917] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 31.917] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 31.917] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 31.917] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[ 31.917] (II) No input driver specified, ignoring this device.
[ 31.917] (II) This device may have been added with another device file.
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x5867f6]
(EE) 1: /usr/bin/X (mieqEnqueue+0x223) [0x567ca3]
(EE) 2: /usr/bin/X (0x400000+0x4f2da) [0x44f2da]
(EE) 3: /usr/lib64/xorg/modules/input/evdev_drv.so (0x7fa75af30000+0x6871) [0x7fa75af36871]
(EE) 4: /usr/bin/X (0x400000+0x784f8) [0x4784f8]
(EE) 5: /usr/bin/X (0x400000+0xa0f6c) [0x4a0f6c]
(EE) 6: /lib64/libpthread.so.0 (0x7fa75fb50000+0x10f50) [0x7fa75fb60f50]
(EE) 7: /lib64/libc.so.6 (ioctl+0x7) [0x7fa75ea8d2c7]
(EE) 8: /usr/lib64/libdrm.so.2 (drmIoctl+0x30) [0x7fa75f944230]
(EE) 9: /usr/lib64/libdrm.so.2 (drmCommandWrite+0x1b) [0x7fa75f94679b]
(EE) 10: /usr/lib64/libdrm_nouveau.so.2 (nouveau_bo_wait+0x89) [0x7fa75d602989]
(EE) 11: /usr/lib64/xorg/modules/drivers/nouveau_drv.so (0x7fa75d808000+0x7b6b) [0x7fa75d80fb6b]
(EE) 12: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x615b) [0x7fa75d1c615b]
(EE) 13: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x88f2) [0x7fa75d1c88f2]
(EE) 14: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x5679) [0x7fa75d1c5679]
(EE) 15: /usr/bin/X (0x400000+0xc6411) [0x4c6411]
(EE) 16: /usr/bin/X (ChangeWindowAttributes+0x221) [0x468461]
(EE) 17: /usr/bin/X (0x400000+0x358a5) [0x4358a5]
(EE) 18: /usr/bin/X (0x400000+0x3afb6) [0x43afb6]
(EE) 19: /usr/bin/X (0x400000+0x29f4d) [0x429f4d]
(EE) 20: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x7fa75e9ccc15]
(EE) 21: /usr/bin/X (0x400000+0x2a2c1) [0x42a2c1]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
(EE) [mi] EQ overflow continuing. 100 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x5867f6]
(EE) 1: /usr/bin/X (0x400000+0x4f2da) [0x44f2da]
(EE) 2: /usr/lib64/xorg/modules/input/evdev_drv.so (0x7fa75af30000+0x6871) [0x7fa75af36871]
(EE) 3: /usr/bin/X (0x400000+0x784f8) [0x4784f8]
(EE) 4: /usr/bin/X (0x400000+0xa0f6c) [0x4a0f6c]
(EE) 5: /lib64/libpthread.so.0 (0x7fa75fb50000+0x10f50) [0x7fa75fb60f50]
(EE) 6: /lib64/libc.so.6 (ioctl+0x7) [0x7fa75ea8d2c7]
(EE) 7: /usr/lib64/libdrm.so.2 (drmIoctl+0x30) [0x7fa75f944230]
(EE) 8: /usr/lib64/libdrm.so.2 (drmCommandWrite+0x1b) [0x7fa75f94679b]
(EE) 9: /usr/lib64/libdrm_nouveau.so.2 (nouveau_bo_wait+0x89) [0x7fa75d602989]
(EE) 10: /usr/lib64/xorg/modules/drivers/nouveau_drv.so (0x7fa75d808000+0x7b6b) [0x7fa75d80fb6b]
(EE) 11: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x615b) [0x7fa75d1c615b]
(EE) 12: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x88f2) [0x7fa75d1c88f2]
(EE) 13: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x5679) [0x7fa75d1c5679]
(EE) 14: /usr/bin/X (0x400000+0xc6411) [0x4c6411]
(EE) 15: /usr/bin/X (ChangeWindowAttributes+0x221) [0x468461]
(EE) 16: /usr/bin/X (0x400000+0x358a5) [0x4358a5]
(EE) 17: /usr/bin/X (0x400000+0x3afb6) [0x43afb6]
(EE) 18: /usr/bin/X (0x400000+0x29f4d) [0x429f4d]
(EE) 19: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x7fa75e9ccc15]
(EE) 20: /usr/bin/X (0x400000+0x2a2c1) [0x42a2c1]
(EE)
[ 47.043] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 47.043] [mi] EQ processing has resumed after 126 dropped events.
[ 47.043] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
[ 91.402] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 91.402] (II) NOUVEAU(0): NVLeaveVT is called.
[ 212.828] (II) evdev: Logitech USB Laser Mouse: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: daskeyboard: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: daskeyboard: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: Power Button: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: Power Button: Close
[ 212.828] (II) UnloadModule: "evdev"

lspci:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A)
00:0b.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (NB-SB link)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2)
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:08.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:10.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:11.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
03:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630] (rev a1)
03:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
07:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
08:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
0d:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
0e:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
0f:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller


Let me know if any further info is needed. Everything works as intended up to 3.10.10 and I really like the 3.11 boot logo ;)

Any help appreciated.

/Søren
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum