Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ssd upgraded to systemd high disk wait
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
cmdic
n00b
n00b


Joined: 06 Apr 2012
Posts: 27

PostPosted: Thu Aug 29, 2013 10:40 pm    Post subject: ssd upgraded to systemd high disk wait Reply with quote

Hi,

I have just upgraded my system to systemd and now I am experiencing very high disk wait on my ssd.

I ran an fsck-check, which did some stuff, but the problem remains. I also ran a SMART check, which was passed

Here is part of my dmesg:

Quote:
[ 1399.610764] ata1.00: exception Emask 0x0 SAct 0x7ffffc07 SErr 0x0 action 0x6 frozen
[ 1399.610772] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610781] ata1.00: cmd 60/08:00:20:09:86/00:00:05:00:00/40 tag 0 ncq 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610785] ata1.00: status: { DRDY }
[ 1399.610789] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610796] ata1.00: cmd 60/00:08:10:e6:7c/01:00:09:00:00/40 tag 1 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610800] ata1.00: status: { DRDY }
[ 1399.610803] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610811] ata1.00: cmd 60/08:10:10:cf:47/00:00:07:00:00/40 tag 2 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610815] ata1.00: status: { DRDY }
[ 1399.610818] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610828] ata1.00: cmd 60/08:50:78:08:86/00:00:05:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610830] ata1.00: status: { DRDY }
[ 1399.610831] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610834] ata1.00: cmd 60/08:58:80:08:86/00:00:05:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610836] ata1.00: status: { DRDY }
[ 1399.610837] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610841] ata1.00: cmd 60/08:60:88:08:86/00:00:05:00:00/40 tag 12 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610842] ata1.00: status: { DRDY }
[ 1399.610844] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610847] ata1.00: cmd 60/08:68:90:08:86/00:00:05:00:00/40 tag 13 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610849] ata1.00: status: { DRDY }
[ 1399.610850] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610853] ata1.00: cmd 60/08:70:98:08:86/00:00:05:00:00/40 tag 14 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610855] ata1.00: status: { DRDY }
[ 1399.610857] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610860] ata1.00: cmd 60/08:78:a0:08:86/00:00:05:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610862] ata1.00: status: { DRDY }
[ 1399.610863] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610866] ata1.00: cmd 60/08:80:a8:08:86/00:00:05:00:00/40 tag 16 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610868] ata1.00: status: { DRDY }
[ 1399.610869] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610873] ata1.00: cmd 60/08:88:b0:08:86/00:00:05:00:00/40 tag 17 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610874] ata1.00: status: { DRDY }
[ 1399.610876] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610879] ata1.00: cmd 60/08:90:b8:08:86/00:00:05:00:00/40 tag 18 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610881] ata1.00: status: { DRDY }
[ 1399.610882] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610885] ata1.00: cmd 60/08:98:c0:08:86/00:00:05:00:00/40 tag 19 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610887] ata1.00: status: { DRDY }
[ 1399.610889] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610892] ata1.00: cmd 60/08:a0:c8:08:86/00:00:05:00:00/40 tag 20 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610893] ata1.00: status: { DRDY }
[ 1399.610895] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610898] ata1.00: cmd 60/08:a8:d0:08:86/00:00:05:00:00/40 tag 21 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610900] ata1.00: status: { DRDY }
[ 1399.610901] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610905] ata1.00: cmd 60/08:b0:d8:08:86/00:00:05:00:00/40 tag 22 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610906] ata1.00: status: { DRDY }
[ 1399.610908] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610911] ata1.00: cmd 60/08:b8:e0:08:86/00:00:05:00:00/40 tag 23 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610913] ata1.00: status: { DRDY }
[ 1399.610914] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610917] ata1.00: cmd 60/08:c0:e8:08:86/00:00:05:00:00/40 tag 24 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610919] ata1.00: status: { DRDY }
[ 1399.610920] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610924] ata1.00: cmd 60/08:c8:f0:08:86/00:00:05:00:00/40 tag 25 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610925] ata1.00: status: { DRDY }
[ 1399.610927] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610930] ata1.00: cmd 60/08:d0:f8:08:86/00:00:05:00:00/40 tag 26 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610932] ata1.00: status: { DRDY }
[ 1399.610933] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610936] ata1.00: cmd 60/08:d8:00:09:86/00:00:05:00:00/40 tag 27 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610938] ata1.00: status: { DRDY }
[ 1399.610939] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610943] ata1.00: cmd 60/08:e0:08:09:86/00:00:05:00:00/40 tag 28 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610944] ata1.00: status: { DRDY }
[ 1399.610946] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610949] ata1.00: cmd 60/08:e8:10:09:86/00:00:05:00:00/40 tag 29 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610951] ata1.00: status: { DRDY }
[ 1399.610952] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610955] ata1.00: cmd 60/08:f0:18:09:86/00:00:05:00:00/40 tag 30 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610957] ata1.00: status: { DRDY }
[ 1399.610960] ata1: hard resetting link
[ 1400.224103] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
[ 1400.237527] ata1.00: configured for UDMA/133
[ 1400.237967] ata1.00: device reported invalid CHS sector 0
[ 1400.237974] ata1.00: device reported invalid CHS sector 0
[ 1400.237977] ata1.00: device reported invalid CHS sector 0
[ 1400.237980] ata1.00: device reported invalid CHS sector 0
[ 1400.237983] ata1.00: device reported invalid CHS sector 0
[ 1400.237986] ata1.00: device reported invalid CHS sector 0
[ 1400.237988] ata1.00: device reported invalid CHS sector 0
[ 1400.237991] ata1.00: device reported invalid CHS sector 0
[ 1400.237994] ata1.00: device reported invalid CHS sector 0
[ 1400.237996] ata1.00: device reported invalid CHS sector 0
[ 1400.237999] ata1.00: device reported invalid CHS sector 0
[ 1400.238002] ata1.00: device reported invalid CHS sector 0
[ 1400.238004] ata1.00: device reported invalid CHS sector 0
[ 1400.238007] ata1.00: device reported invalid CHS sector 0
[ 1400.238010] ata1.00: device reported invalid CHS sector 0
[ 1400.238012] ata1.00: device reported invalid CHS sector 0
[ 1400.238015] ata1.00: device reported invalid CHS sector 0
[ 1400.238018] ata1.00: device reported invalid CHS sector 0
[ 1400.238020] ata1.00: device reported invalid CHS sector 0
[ 1400.238023] ata1.00: device reported invalid CHS sector 0
[ 1400.238026] ata1.00: device reported invalid CHS sector 0
[ 1400.238028] ata1.00: device reported invalid CHS sector 0
[ 1400.238031] ata1.00: device reported invalid CHS sector 0
[ 1400.238034] ata1.00: device reported invalid CHS sector 0
[ 1400.238044] sd 0:0:0:0: [sda]
[ 1400.238047] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238052] sd 0:0:0:0: [sda]
[ 1400.238053] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238055] Descriptor sense data with sense descriptors (in hex):
[ 1400.238056] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238062] 00 00 00 00
[ 1400.238065] sd 0:0:0:0: [sda]
[ 1400.238066] Add. Sense: No additional sense information
[ 1400.238068] sd 0:0:0:0: [sda] CDB:
[ 1400.238068] Read(10): 28 00 05 86 09 20 00 00 08 00
[ 1400.238074] blk_update_request: 21 callbacks suppressed
[ 1400.238075] end_request: I/O error, dev sda, sector 92670240
[ 1400.238088] sd 0:0:0:0: [sda]
[ 1400.238089] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238091] sd 0:0:0:0: [sda]
[ 1400.238091] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238093] Descriptor sense data with sense descriptors (in hex):
[ 1400.238094] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238100] 00 00 00 00
[ 1400.238102] sd 0:0:0:0: [sda]
[ 1400.238103] Add. Sense: No additional sense information
[ 1400.238105] sd 0:0:0:0: [sda] CDB:
[ 1400.238105] Read(10): 28 00 05 86 08 78 00 00 08 00
[ 1400.238110] end_request: I/O error, dev sda, sector 92670072
[ 1400.238115] sd 0:0:0:0: [sda]
[ 1400.238116] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238117] sd 0:0:0:0: [sda]
[ 1400.238118] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238120] Descriptor sense data with sense descriptors (in hex):
[ 1400.238121] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238126] 00 00 00 00
[ 1400.238129] sd 0:0:0:0: [sda]
[ 1400.238129] Add. Sense: No additional sense information
[ 1400.238131] sd 0:0:0:0: [sda] CDB:
[ 1400.238132] Read(10): 28 00 05 86 08 80 00 00 08 00
[ 1400.238136] end_request: I/O error, dev sda, sector 92670080
[ 1400.238140] sd 0:0:0:0: [sda]
[ 1400.238141] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238142] sd 0:0:0:0: [sda]
[ 1400.238143] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238145] Descriptor sense data with sense descriptors (in hex):
[ 1400.238146] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238151] 00 00 00 00
[ 1400.238154] sd 0:0:0:0: [sda]
[ 1400.238154] Add. Sense: No additional sense information
[ 1400.238156] sd 0:0:0:0: [sda] CDB:
[ 1400.238157] Read(10): 28 00 05 86 08 88 00 00 08 00
[ 1400.238161] end_request: I/O error, dev sda, sector 92670088
[ 1400.238165] sd 0:0:0:0: [sda]
[ 1400.238166] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238167] sd 0:0:0:0: [sda]
[ 1400.238168] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238170] Descriptor sense data with sense descriptors (in hex):
[ 1400.238171] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238176] 00 00 00 00
[ 1400.238179] sd 0:0:0:0: [sda]
[ 1400.238179] Add. Sense: No additional sense information
[ 1400.238181] sd 0:0:0:0: [sda] CDB:
[ 1400.238182] Read(10): 28 00 05 86 08 90 00 00 08 00
[ 1400.238186] end_request: I/O error, dev sda, sector 92670096
[ 1400.238190] sd 0:0:0:0: [sda]
[ 1400.238191] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238192] sd 0:0:0:0: [sda]
[ 1400.238193] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238195] Descriptor sense data with sense descriptors (in hex):
[ 1400.238195] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238201] 00 00 00 00
[ 1400.238203] sd 0:0:0:0: [sda]
[ 1400.238204] Add. Sense: No additional sense information
[ 1400.238206] sd 0:0:0:0: [sda] CDB:
[ 1400.238206] Read(10): 28 00 05 86 08 98 00 00 08 00
[ 1400.238211] end_request: I/O error, dev sda, sector 92670104
[ 1400.238215] sd 0:0:0:0: [sda]
[ 1400.238216] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238217] sd 0:0:0:0: [sda]
[ 1400.238218] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238219] Descriptor sense data with sense descriptors (in hex):
[ 1400.238220] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238226] 00 00 00 00
[ 1400.238228] sd 0:0:0:0: [sda]
[ 1400.238229] Add. Sense: No additional sense information
[ 1400.238231] sd 0:0:0:0: [sda] CDB:
[ 1400.238231] Read(10): 28 00 05 86 08 a0 00 00 08 00
[ 1400.238236] end_request: I/O error, dev sda, sector 92670112
[ 1400.238240] sd 0:0:0:0: [sda]
[ 1400.238241] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238242] sd 0:0:0:0: [sda]
[ 1400.238243] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238244] Descriptor sense data with sense descriptors (in hex):
[ 1400.238245] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238251] 00 00 00 00
[ 1400.238253] sd 0:0:0:0: [sda]
[ 1400.238254] Add. Sense: No additional sense information
[ 1400.238256] sd 0:0:0:0: [sda] CDB:
[ 1400.238256] Read(10): 28 00 05 86 08 a8 00 00 08 00
[ 1400.238261] end_request: I/O error, dev sda, sector 92670120
[ 1400.238265] sd 0:0:0:0: [sda]
[ 1400.238266] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238267] sd 0:0:0:0: [sda]
[ 1400.238268] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238269] Descriptor sense data with sense descriptors (in hex):
[ 1400.238270] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238276] 00 00 00 00
[ 1400.238278] sd 0:0:0:0: [sda]
[ 1400.238279] Add. Sense: No additional sense information
[ 1400.238281] sd 0:0:0:0: [sda] CDB:
[ 1400.238281] Read(10): 28 00 05 86 08 b0 00 00 08 00
[ 1400.238286] end_request: I/O error, dev sda, sector 92670128
[ 1400.238290] sd 0:0:0:0: [sda]
[ 1400.238291] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238292] sd 0:0:0:0: [sda]
[ 1400.238293] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238295] Descriptor sense data with sense descriptors (in hex):
[ 1400.238296] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238301] 00 00 00 00
[ 1400.238303] sd 0:0:0:0: [sda]
[ 1400.238304] Add. Sense: No additional sense information
[ 1400.238306] sd 0:0:0:0: [sda] CDB:
[ 1400.238307] Read(10): 28 00 05 86 08 b8 00 00 08 00
[ 1400.238311] end_request: I/O error, dev sda, sector 92670136
[ 1400.238315] sd 0:0:0:0: [sda]
[ 1400.238316] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238317] sd 0:0:0:0: [sda]
[ 1400.238318] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238320] Descriptor sense data with sense descriptors (in hex):
[ 1400.238321] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238326] 00 00 00 00
[ 1400.238328] sd 0:0:0:0: [sda]
[ 1400.238329] Add. Sense: No additional sense information
[ 1400.238331] sd 0:0:0:0: [sda] CDB:
[ 1400.238332] Read(10): 28 00 05 86 08 c0 00 00 08 00
[ 1400.238339] sd 0:0:0:0: [sda]
[ 1400.238340] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238341] sd 0:0:0:0: [sda]
[ 1400.238342] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238344] Descriptor sense data with sense descriptors (in hex):
[ 1400.238345] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238350] 00 00 00 00
[ 1400.238352] sd 0:0:0:0: [sda]
[ 1400.238353] Add. Sense: No additional sense information
[ 1400.238355] sd 0:0:0:0: [sda] CDB:
[ 1400.238356] Read(10): 28 00 05 86 08 c8 00 00 08 00
[ 1400.238363] sd 0:0:0:0: [sda]
[ 1400.238364] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238365] sd 0:0:0:0: [sda]
[ 1400.238366] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238368] Descriptor sense data with sense descriptors (in hex):
[ 1400.238369] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238374] 00 00 00 00
[ 1400.238377] sd 0:0:0:0: [sda]
[ 1400.238377] Add. Sense: No additional sense information
[ 1400.238379] sd 0:0:0:0: [sda] CDB:
[ 1400.238380] Read(10): 28 00 05 86 08 d0 00 00 08 00
[ 1400.238387] sd 0:0:0:0: [sda]
[ 1400.238388] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238389] sd 0:0:0:0: [sda]
[ 1400.238390] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238392] Descriptor sense data with sense descriptors (in hex):
[ 1400.238393] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238398] 00 00 00 00
[ 1400.238401] sd 0:0:0:0: [sda]
[ 1400.238402] Add. Sense: No additional sense information
[ 1400.238403] sd 0:0:0:0: [sda] CDB:
[ 1400.238404] Read(10): 28 00 05 86 08 d8 00 00 08 00
[ 1400.238411] sd 0:0:0:0: [sda]
[ 1400.238412] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238413] sd 0:0:0:0: [sda]
[ 1400.238414] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238416] Descriptor sense data with sense descriptors (in hex):
[ 1400.238417] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238422] 00 00 00 00
[ 1400.238424] sd 0:0:0:0: [sda]
[ 1400.238425] Add. Sense: No additional sense information
[ 1400.238427] sd 0:0:0:0: [sda] CDB:
[ 1400.238428] Read(10): 28 00 05 86 08 e0 00 00 08 00
[ 1400.238435] sd 0:0:0:0: [sda]
[ 1400.238436] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238437] sd 0:0:0:0: [sda]
[ 1400.238438] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238440] Descriptor sense data with sense descriptors (in hex):
[ 1400.238441] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238446] 00 00 00 00
[ 1400.238449] sd 0:0:0:0: [sda]
[ 1400.238450] Add. Sense: No additional sense information
[ 1400.238451] sd 0:0:0:0: [sda] CDB:
[ 1400.238452] Read(10): 28 00 05 86 08 e8 00 00 08 00
[ 1400.238459] sd 0:0:0:0: [sda]
[ 1400.238460] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238461] sd 0:0:0:0: [sda]
[ 1400.238462] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238464] Descriptor sense data with sense descriptors (in hex):
[ 1400.238465] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238470] 00 00 00 00
[ 1400.238473] sd 0:0:0:0: [sda]
[ 1400.238473] Add. Sense: No additional sense information
[ 1400.238475] sd 0:0:0:0: [sda] CDB:
[ 1400.238476] Read(10): 28 00 05 86 08 f0 00 00 08 00
[ 1400.238483] sd 0:0:0:0: [sda]
[ 1400.238484] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238485] sd 0:0:0:0: [sda]
[ 1400.238486] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238488] Descriptor sense data with sense descriptors (in hex):
[ 1400.238489] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238494] 00 00 00 00
[ 1400.238496] sd 0:0:0:0: [sda]
[ 1400.238497] Add. Sense: No additional sense information
[ 1400.238499] sd 0:0:0:0: [sda] CDB:
[ 1400.238500] Read(10): 28 00 05 86 08 f8 00 00 08 00
[ 1400.238507] sd 0:0:0:0: [sda]
[ 1400.238508] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238509] sd 0:0:0:0: [sda]
[ 1400.238510] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238511] Descriptor sense data with sense descriptors (in hex):
[ 1400.238512] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238518] 00 00 00 00
[ 1400.238520] sd 0:0:0:0: [sda]
[ 1400.238521] Add. Sense: No additional sense information
[ 1400.238523] sd 0:0:0:0: [sda] CDB:
[ 1400.238523] Read(10): 28 00 05 86 09 00 00 00 08 00
[ 1400.238530] sd 0:0:0:0: [sda]
[ 1400.238531] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238533] sd 0:0:0:0: [sda]
[ 1400.238534] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238535] Descriptor sense data with sense descriptors (in hex):
[ 1400.238536] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238541] 00 00 00 00
[ 1400.238544] sd 0:0:0:0: [sda]
[ 1400.238545] Add. Sense: No additional sense information
[ 1400.238546] sd 0:0:0:0: [sda] CDB:
[ 1400.238547] Read(10): 28 00 05 86 09 08 00 00 08 00
[ 1400.238554] sd 0:0:0:0: [sda]
[ 1400.238556] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238557] sd 0:0:0:0: [sda]
[ 1400.238558] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238559] Descriptor sense data with sense descriptors (in hex):
[ 1400.238560] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238565] 00 00 00 00
[ 1400.238568] sd 0:0:0:0: [sda]
[ 1400.238569] Add. Sense: No additional sense information
[ 1400.238570] sd 0:0:0:0: [sda] CDB:
[ 1400.238571] Read(10): 28 00 05 86 09 10 00 00 08 00
[ 1400.238578] sd 0:0:0:0: [sda]
[ 1400.238580] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238581] sd 0:0:0:0: [sda]
[ 1400.238582] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238583] Descriptor sense data with sense descriptors (in hex):
[ 1400.238584] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238590] 00 00 00 00
[ 1400.238592] sd 0:0:0:0: [sda]
[ 1400.238593] Add. Sense: No additional sense information
[ 1400.238594] sd 0:0:0:0: [sda] CDB:
[ 1400.238595] Read(10): 28 00 05 86 09 18 00 00 08 00
[ 1400.238602] ata1: EH complete


The problem mostly occus while writing or attempting to open a file.

If you need additional information, please let me know.

best regards,
cmdic
Back to top
View user's profile Send private message
eccerr0r
Advocate
Advocate


Joined: 01 Jul 2004
Posts: 3822
Location: USA

PostPosted: Fri Aug 30, 2013 12:34 am    Post subject: Reply with quote

These errors don't look like software problems if you just upgraded systemd...

I'd look into hardware issues - check power/data cables. Also, what SATA controller are you using (as well as kernel version, and what SSD?)
_________________
Intel Core i7 2700K@ 4.1GHz/HD3000 graphics/8GB DDR3/180GB SSD
What am I supposed to be advocating?
Back to top
View user's profile Send private message
cmdic
n00b
n00b


Joined: 06 Apr 2012
Posts: 27

PostPosted: Thu Sep 05, 2013 9:20 pm    Post subject: Reply with quote

eccerr0r wrote:
These errors don't look like software problems if you just upgraded systemd...

I'd look into hardware issues - check power/data cables. Also, what SATA controller are you using (as well as kernel version, and what SSD?)


Hi,
thanks for the suggestion. I have plugged my SSD into a SATA 2 Port and it is running fine again.

My SSD is: Model=Corsair Force GT, FwRev=1.3.3
SATA3-Controller: 0a:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 10)
SATA2-Controller: 04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
Kernel-Version: 3.9.5

I actually would like to use my SATA-3-Ports. Do you think it has something to do with the kernel version?
Back to top
View user's profile Send private message
eccerr0r
Advocate
Advocate


Joined: 01 Jul 2004
Posts: 3822
Location: USA

PostPosted: Thu Sep 05, 2013 10:08 pm    Post subject: Reply with quote

Did you upgrade the kernel recently leading to the possible correlation between it and the slowdown?

I would think this should be regression tested fairly well and a lot of people would have run into this issue. Then again I'm not sure how many people test Marvell.

I'm currently using 3.8.13 with the SATA 6Gbps ports on a Z68 and a H77, and so far so good, as well as SATA 3Gbps on JMicron and other chips. I have not tried the Marvell controllers as I don't own them.
_________________
Intel Core i7 2700K@ 4.1GHz/HD3000 graphics/8GB DDR3/180GB SSD
What am I supposed to be advocating?
Back to top
View user's profile Send private message
cmdic
n00b
n00b


Joined: 06 Apr 2012
Posts: 27

PostPosted: Fri Sep 20, 2013 4:32 am    Post subject: Reply with quote

Hi,

I have upgraded the Kernel to 3.10, but I keep getting the same errors. I think they occur less often, but they are there.

Here is some SMART-Data output, but I think the results look ok:
Code:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.7-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     Corsair Force GT
Serial Number:    1151820200000689087A
LU WWN Device Id: 0 000000 000000000
Firmware Version: 1.3.3
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Sep 20 06:30:32 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       ( 2097) seconds.
Offline data collection
capabilities:           (0x7f) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Abort Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  48) minutes.
Conveyance self-test routine
recommended polling time:     (   2) minutes.
SCT capabilities:           (0x0021)   SCT Status supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   090   090   050    Pre-fail  Always       -       0/11931192
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   087   087   000    Old_age   Always       -       12108h+33m+07.400s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       184
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       43
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       1
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   027   059   000    Old_age   Always       -       27 (Min/Max 18/59)
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/11931192
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
201 Unc_Soft_Read_Err_Rate  0x001c   120   120   000    Old_age   Offline      -       0/11931192
204 Soft_ECC_Correct_Rate   0x001c   120   120   000    Old_age   Offline      -       0/11931192
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100
231 SSD_Life_Left           0x0013   099   099   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       31488
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       3514
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       3514
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       5688

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Back to top
View user's profile Send private message
Schnulli
Apprentice
Apprentice


Joined: 25 Jun 2010
Posts: 155

PostPosted: Fri Sep 20, 2013 1:30 pm    Post subject: Reply with quote

i had nearly same problems with a Marvel and a Crossair SSD, now using a H77 Board and it works fine, even on my H61 it works with this SSD
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum