Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Step 7.b. Installing the Sources
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
Newbee 12
n00b
n00b


Joined: 31 Oct 2012
Posts: 38
Location: Northwest, USA

PostPosted: Fri Jul 19, 2013 11:35 pm    Post subject: Step 7.b. Installing the Sources Reply with quote

Quote:
NewBee 12

I am at the step above all is going fine until emerge any assisance would be helpful
Code:
emerge gentoo-sources
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-devel/bc-1.06.95-r1/work/bc-1.06.95/config.log
 * ERROR: sys-devel/bc-1.06.95-r1 failed (configure phase):
 *   econf failed
 *
 * Call stack:
 *          ebuild.sh, line   93:  Called src_configure
 *        environment, line 2451:  Called econf '--with-readline' '--without-libedit'
 *   phase-helpers.sh, line  521:  Called die
 * The specific snippet of code:
 *            die "econf failed"
 *
 * If you need support, post the output of `emerge --info '=sys-devel/bc-1.06.95-r1'`,
 * the complete build log and the output of `emerge -pqv '=sys-devel/bc-1.06.95-r1'`.
 * The complete build log is located at '/var/tmp/portage/sys-devel/bc-1.06.95-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-devel/bc-1.06.95-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-devel/bc-1.06.95-r1/work/bc-1.06.95'
 * S: '/var/tmp/portage/sys-devel/bc-1.06.95-r1/work/bc-1.06.95'

>>> Failed to emerge sys-devel/bc-1.06.95-r1, Log file:

>>>  '/var/tmp/portage/sys-devel/bc-1.06.95-r1/temp/build.log'

 * Messages for package sys-devel/bc-1.06.95-r1:

 * ERROR: sys-devel/bc-1.06.95-r1 failed (configure phase):
 *   econf failed
 *
 * Call stack:
 *          ebuild.sh, line   93:  Called src_configure
 *        environment, line 2451:  Called econf '--with-readline' '--without-libedit'
 *   phase-helpers.sh, line  521:  Called die
 * The specific snippet of code:
 *            die "econf failed"
 *
 * If you need support, post the output of `emerge --info '=sys-devel/bc-1.06.95-r1'`,
 * the complete build log and the output of `emerge -pqv '=sys-devel/bc-1.06.95-r1'`.
 * The complete build log is located at '/var/tmp/portage/sys-devel/bc-1.06.95-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-devel/bc-1.06.95-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-devel/bc-1.06.95-r1/work/bc-1.06.95'
 * S: '/var/tmp/portage/sys-devel/bc-1.06.95-r1/work/bc-1.06.95'

Quote:
Below is the out put of my emerge --info and make.conf

    chroot) sysresccd / # emerge --info
    Portage 2.1.12.2 (default/linux/amd64/13.0/no-multilib, gcc-4.6.3, glibc-2.15-r3, 3.2.33-std311-amd64 x86_64)
    =================================================================
    System uname: Linux-3.2.33-std311-amd64-x86_64-Intel-R-_Core-TM-_i3_CPU_530_@_2.93GHz-with-gentoo-2.2
    KiB Mem: 3911644 total, 1070536 free
    KiB Swap: 1048572 total, 1041048 free
    Timestamp of tree: Fri, 19 Jul 2013 00:45:02 +0000
    ld GNU ld (GNU Binutils) 2.23.1
    app-shells/bash: 4.2_p45
    dev-lang/python: 2.7.5, 3.2.5-r1
    dev-util/pkgconfig: 0.28
    sys-apps/baselayout: 2.2
    sys-apps/openrc: 0.11.8
    sys-apps/sandbox: 2.6-r1
    sys-devel/autoconf: 2.69
    sys-devel/automake: 1.12.6
    sys-devel/binutils: 2.23.1
    sys-devel/gcc: 4.6.3
    sys-devel/gcc-config: 1.7.3
    sys-devel/libtool: 2.4-r1
    sys-devel/make: 3.82-r4
    sys-kernel/linux-headers: 3.7 (virtual/os-headers)
    sys-libs/glibc: 2.15-r3
    Repositories: gentoo
    ACCEPT_KEYWORDS="amd64 ~amd64"
    ACCEPT_LICENSE="*"
    CBUILD="x86_64-pc-linux-gnu"
    CFLAGS="-march=k8 -O2 -pipes"
    CHOST="x86_64-pc-linux-gnu"
    CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt /usr/share/openvpn/easy-rsa"
    CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
    CXXFLAGS="-march=k8 -O2 -pipes"
    DISTDIR="/usr/portage/distfiles"
    FCFLAGS="-O2 -pipe"
    FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
    FFLAGS="-O2 -pipe"
    GENTOO_MIRRORS="http://gentoo.osuosl.org/distfiles/ http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo"
    LANG="en_US.UTF-8"
    LDFLAGS="-Wl,-O1 -Wl,--as-needed"
    MAKEOPTS="-j2"
    PKGDIR="/usr/portage/packages"
    PORTAGE_CONFIGROOT="/"
    PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
    PORTAGE_TMPDIR="/var/tmp"
    PORTDIR="/usr/portage"
    PORTDIR_OVERLAY=""
    SYNC="rsync://rsync.gentoo.org/gentoo-portage"
    USE="acl amd64 berkdb bzip2 cli cracklib crypt cxx dri fortran gdbm gpm iconv ipv6 mmx modules mudflap ncurses nls nptl openmp pam pcre readline session sse sse2 ssl tcpd unicode zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-4" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_2" RUBY_TARGETS="ruby19 ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
    Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON


Quote:
Make.conf

[# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# Contains local system settings for Portage system
# Please review 'man make.conf' for more information.
#Host Setting
CHOST="x86_64-pc-linux-gnu"
#
#Host and optimization settings
CFLAGS="-march=k8 -O2 -pipe"s
#
#If you set a CFLAGS above, then this line will set your default C++ flags to the same settings
CXXFLAGS="${CFLAGS}"
#
#MAKEOPTS provides extra options that may be passed to 'make'when a program is compiled.
#Presently the only use is for spedifying the number of parallel makes (-j) to perform.
#The suggested number for parallel makes is CPUs+1.
MAKEOPTS="-j2"
#
#KEYWORDS are used inebuilds to mask and unmask packages based on the platform they are set for.
ACCEPT_KEYWORDS="~amd64"
#
# ACCEPT_LICENSE is used to mask packages based on licensing restrictions.
# It may contain both license and group names, where group names are
# prefixed with the '@' symbol. License groups are defined in the
# license_groups file (see portage(5) man page). In addition to license
# and group names, the * and -* wildcard tokens are also supported.
#
#ACCEPT_LICENSE="* -@EULA" //Accept any license except those in the EULA license group (default).
#ACCEPT_LICENSE="-* @FREE" //Only accept licenses in the FREE license group (i.e. Free Software).
ACCEPT_LICENSE="*"
#
# Portage Directories
# Each of these settings controls an aspect of portage's storage and file
# system usage. If you change any of these, be sure it is available when
# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
#============
#Location portage will use for compilations and temporary storage of data
PORTAGE_TMPDIR=/var/tmp
#
#PORTDIR is the location of the portage tree. This is the repository for all profile information as well as all ebuilds.
#If you change this, you must update your /etc/portage/make.profile symlink accordingly.
PORTDIR=/usr/portage
#
# DISTDIR is where all of the source code tarballs will be placed for
# emerges. After packages are built, it is safe to remove any and
# all files from this directory since they will be automatically
# fetched on demand for a given build. If you would like to
# selectively prune obsolete files from this directory, see
# eclean from the gentoolkit package. Note that locations under
# /usr/portage are not necessarily safe for data storage. See the
# PORTDIR documentation for more information.
DISTDIR=/usr/portage/distfiles
#
#PKGDIR is the location of binary packages that you can have created
#with '--buildpkg' or '-b' while emerging a package. This can get
#up to several hundred megs, or even a few gigs. Note that
#locations under /usr/portage are not necessarily safe for data
#storage. See the PORTDIR documentation for more information.
PKGDIR=/usr/portage/packages
#
#PORT_LOGDIR is the location where portage will store all the logs it
#creates from each individual merge. They are stored as
#${CATEGORY}:${PF}:YYYYMMDD-HHMMSS.log in the directory specified.
#If the directory does not exist, it will be created automatically and
#group permissions will be applied to it. If the directory already
#exists, portage will not modify it's permissions.
#PORT_LOGDIR=""
#
#PORTDIR_OVERLAY is a directory where local ebuils may be stored without concern that they will be deleted by rsync updates.
#Default is not defined.
#PORTDIR_OVERLAY=/usr/local/portage
#
# Fetching files
# If you need to set a proxy for wget or lukemftp, add the appropriate "export
# ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if
# all users on your system should use them.
#
# Portage uses wget by default. Here are some settings for some alternate
# downloaders -- note that you need to merge these programs first before they
# will be available. The command should be written to place the fetched file
# at \${DISTDIR}/\${FILE}.
#
# Default fetch command (3 tries, passive ftp for firewall compatibility)
#FETCHCOMMAND="wget -t 3 -T 60 --passive-ftp -O \"\${DISTDIR}/\${FILE}\" \"\${URI}\""
#RESUMECOMMAND="wget -c -t 3 -T 60 --passive-ftp -O \"\${DISTDIR}/\${FILE}\" \"\${URI}\""
#
# Using wget, ratelimiting downloads
#FETCHCOMMAND="wget -t 3 -T 60 --passive-ftp --limit-rate=200k -O \"\${DISTDIR}/\${FILE}\" \"\${URI}\""
#RESUMECOMMAND="wget -c -t 3 -T 60 --passive-ftp --limit-rate=200k -O \"\${DISTDIR}/\${FILE}\" \"\${URI}\""
#
# Lukemftp (BSD ftp):
#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \"\${DISTDIR}/\${FILE}\" \"\${URI}\""
#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \"\${DISTDIR}/\${FILE}\" \"\${URI}\""
#
# Portage uses GENTOO_MIRRORS to specify mirrors to use for source retrieval.
# The list is a space separated list which is read left to right. If you use
# another mirror we highly recommend leaving the default mirror at the end of
# the list so that portage will fall back to it if the files cannot be found
# on your specified mirror. We _HIGHLY_ recommend that you change this setting
# to a nearby mirror by merging and using the 'mirrorselect' tool.
GENTOO_MIRRORS="http://gentoo.osuosl.org/distfiles/ http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo"
#
# Portage uses PORTAGE_BINHOST to specify mirrors for prebuilt-binary packages.
# The list is a single entry specifying the full address of the directory
# serving the tbz2's for your system. Running emerge with either '--getbinpkg'
# or '--getbinpkgonly' will cause portage to retrieve the metadata from all
# packages in the directory specified, and use that data to determine what will
# be downloaded and merged. '-g' or '-gK' are the recommend parameters. Please
# consult the man pages and 'emerge --help' for more information. For FTP, the
# default connection is passive -- If you require an active connection, affix
# an asterisk (*) to the end of the host:port string before the path.
#PORTAGE_BINHOST="http://grp.mirror.site/gentoo/grp/1.4/i686/athlon-xp/"
# This ftp connection is passive ftp.
#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site/pub/grp/i686/athlon-xp/"
# This ftp connection is active ftp.
#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site:21*/pub/grp/i686/athlon-xp/"
#
# Synchronizing Portage
# Each of these settings affects how Gentoo synchronizes your Portage tree.
# Synchronization is handled by rsync and these settings allow some control
# over how it is done.
#
# SYNC is the server used by rsync to retrieve a localized rsync mirror
# rotation. This allows you to select servers that are geographically
# close to you, yet still distribute the load over a number of servers.
# Please do not single out specific rsync mirrors. Doing so places undue
# stress on particular mirrors. Instead you may use one of the following
# continent specific rotations:
#
# Default: "rsync://rsync.gentoo.org/gentoo-portage"
# North America: "rsync://rsync.namerica.gentoo.org/gentoo-portage"
# South America: "rsync://rsync.samerica.gentoo.org/gentoo-portage"
# Europe: "rsync://rsync.europe.gentoo.org/gentoo-portage"
# Asia: "rsync://rsync.asia.gentoo.org/gentoo-portage"
# Australia: "rsync://rsync.au.gentoo.org/gentoo-portage"
#
# If you have multiple Gentoo boxes, it is probably a good idea to have only
# one of them sync from the rotations above. The other boxes can then rsync
# from the local rsync server, reducing the load on the mirrors.
# Instructions for setting up a local rsync server are available here:
# http://www.gentoo.org/doc/en/rsync.xml
#
#SYNC="rsync://rsync.gentoo.org/gentoo-portage"
#
# PORTAGE_RSYNC_RETRIES sets the number of times portage will attempt to retrieve
# a current portage tree before it exits with an error. This allows
# for a more successful retrieval without user intervention most times.
# If set to a negative number, then retry until all possible addresses are
# exhausted.
#PORTAGE_RSYNC_RETRIES="-1"
#
# PORTAGE_RSYNC_EXTRA_OPTS can be used to feed additional options to the rsync
# command used by `emerge --sync`. This will not change the default options
# which are set by PORTAGE_RSYNC_OPTS (don't change those unless you know
# exactly what you're doing).
#PORTAGE_RSYNC_EXTRA_OPTS=""
#
# Advanced Features
# =================
#
# EMERGE_DEFAULT_OPTS allows emerge to act as if certain options are
# specified on every run. Useful options include --ask, --verbose,
# --usepkg and many others. Options that are not useful, such as --help,
# are not filtered.
#EMERGE_DEFAULT_OPTS=""
#
# INSTALL_MASK allows certain files to not be installed into your file system.
# This is useful when you wish to filter out a certain set of files from
# ever being installed, such as INSTALL.gz or TODO.gz
#INSTALL_MASK=""
#
# PORTAGE_NICENESS provides a default increment to emerge's niceness level.
# Note: This is an increment. Running emerge in a niced environment will
# reduce it further. Default is unset.
#PORTAGE_NICENESS=3
#
# PORTAGE_IONICE_COMMAND provides a command for portage to call in order to
# adjust the io priority of portage and it's subprocesses. Default is
# unset.
#PORTAGE_IONICE_COMMAND="ionice -c 3 -p \${PID}"
#
# AUTOCLEAN enables portage to automatically clean out older or overlapping
# packages from the system after every successful merge. This is the
# same as running 'emerge -c' after every merge. Set with: "yes" or "no".
# This does not affect the unpacked source. See 'noclean' below.
#
# Warning: AUTOCLEAN="no" can cause serious problems due to overlapping
# packages. Do not use it unless absolutely necessary!
#AUTOCLEAN="yes"
#
# FEATURES defines actions portage takes by default. This is an incremental
# variable. See the make.conf(5) man page for a complete list of supported
# values and their respective meanings.
#FEATURES="ccache distcc installsources \
# splitdebug test userpriv usersandbox"
#
# CCACHE_SIZE and CCACHE_DIR are used to control the behavior of ccache, and
# and are only used if "ccache" is in FEATURES.
#
# CCACHE_SIZE sets the space limitations for ccache. The default size is
# "2G", or 2 gigabytes. Units are specified with 'G', 'M', or 'K'.
#
#CCACHE_SIZE="512M"
#
# CCACHE_DIR sets the ccache path. If not specified, portage will default
# to "${PORTAGE_TMPDIR}/ccache".
#
# Note that to display ccache statistics outside of portage, you must
# remember to give the correct path to the cache.
#
# $ CCACHE_DIR=/var/tmp/ccache ccache -s
#
#CCACHE_DIR="${PORTAGE_TMPDIR}/ccache"
#
# DISTCC_DIR sets the temporary space used by distcc.
#DISTCC_DIR="${PORTAGE_TMPDIR}/.distcc"
#
# logging related variables:
# PORTAGE_ELOG_CLASSES: selects messages to be logged, possible values are:
# info, warn, error, log, qa, *
#PORTAGE_ELOG_CLASSES="log warn error"
#
# PORTAGE_ELOG_SYSTEM: selects the module(s) to process the log messages. Modules
# included in portage are (empty means logging is disabled):
# echo (display messages again when emerge exits)
# save (saves one log per package in $PORT_LOGDIR/elog,
# /var/log/portage/elog if $PORT_LOGDIR is unset)
# custom (passes all messages to $PORTAGE_ELOG_COMMAND)
# syslog (sends all messages to syslog)
# mail (send all messages to the mailserver defined
# in $PORTAGE_ELOG_MAILURI)
# save_summary (like "save" but merges all messages
# in $PORT_LOGDIR/elog/summary.log,
# /var/log/portage/elog/summary.log if
# $PORT_LOGDIR is unset)
# mail_summary (like "mail" but sends all messages in
# a single mail when emerge exits)
# To use elog you should enable at least one module
# The module name may be followed by a colon and a comma
# separated list of loglevels to override PORTAGE_ELOG_CLASSES
# for this module (e.g.
# PORTAGE_ELOG_SYSTEM="mail:warn,error syslog:* save")
#PORTAGE_ELOG_SYSTEM="save_summary:log,warn,error,qa echo"

# PORTAGE_ELOG_COMMAND: only used with the "custom" logging module. Specifies a command
# to process log messages. Two variables are expanded:
# ${PACKAGE} - expands to the cpv entry of the processed
# package (see $PVR in ebuild(5))
# ${LOGFILE} - absolute path to the logfile
# Both variables have to be quoted with single quotes
#PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '\${PACKAGE}' -f '\${LOGFILE}'"

# PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
# module. In most cases listing the recipient address and
# the receiving mailserver should be sufficient, but you can
# also use advanced settings like authentication or TLS. The
# full syntax is:
# address [[user:passwd@]mailserver[:port]]
# where
# address: recipient address
# user: username for smtp auth (defaults to none)
# passwd: password for smtp auth (defaults to none)
# mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
# alternatively this can also be a the path to a sendmail binary if you don't want to use smtp
# port: port to use on the given smtp server (defaults to 25, values > 100000 indicate that starttls should be used on (port-100000))
# Examples:
#PORTAGE_ELOG_MAILURI="root@localhost localhost" (this is also the default setting)
#PORTAGE_ELOG_MAILURI="user@some.domain mail.some.domain" (sends mails to user@some.domain using the mailserver mail.some.domain)
#PORTAGE_ELOG_MAILURI="user@some.domain user:secret@mail.some.domain:100465" (this is left uncommented as a reader exercise ;)

# PORTAGE_ELOG_MAILFROM: you can set the from-address of logmails with this variable,
# if unset mails are sent by "portage" (this default may fail
# in some environments).
#PORTAGE_ELOG_MAILFROM="portage@some.domain"

# PORTAGE_ELOG_MAILSUBJECT: template string to be used as subject for logmails. The following
# variables are expanded:
# ${ACTION} - merged, unmerged, or unknown
# ${PACKAGE} - see description of PORTAGE_ELOG_COMMAND
# ${HOST} - FQDN of the host portage is running on
#PORTAGE_ELOG_MAILSUBJECT="[portage] ebuild log for \${PACKAGE} on \${HOST}"[/list]
_________________
Newbee 12
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 32098
Location: 56N 3W

PostPosted: Fri Jul 19, 2013 11:54 pm    Post subject: Reply with quote

Newbee 12,

emerge wgetpaste then use it to put /var/tmp/portage/sys-devel/bc-1.06.95-r1/temp/build.log on the web.
Its too big to fit in a post. Tell us the URL it gives you.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
BillWho
Veteran
Veteran


Joined: 03 Mar 2012
Posts: 1600
Location: US

PostPosted: Sat Jul 20, 2013 4:32 am    Post subject: Reply with quote

Newbee 12,

CFLAGS="-march=k8 -O2 -pipes"

should be pipe
_________________
Good luck :wink:

Since installing gentoo, my life has become one long emerge :)
Back to top
View user's profile Send private message
Jack Hair
n00b
n00b


Joined: 10 Jul 2013
Posts: 13

PostPosted: Sat Jul 20, 2013 4:46 am    Post subject: Reply with quote

BillWho wrote:
Newbee 12,

CFLAGS="-march=k8 -O2 -pipes"

should be pipe


And -march=k8 is for AMD K8 processors (Athlon64). A quick search doesn't give me a clue what flag is for Core i processors but you can always use -march=native.
Back to top
View user's profile Send private message
Newbee 12
n00b
n00b


Joined: 31 Oct 2012
Posts: 38
Location: Northwest, USA

PostPosted: Wed Jul 24, 2013 3:14 pm    Post subject: (SOLVED) Installing gentoo -Emerge Reply with quote

Quote:
NewBee 12
Such a newb looks to be emerging now it was the syntax on the resolv.conf. Thank you for your assistance, guess I was looking at it to long and just did not see it.
_________________
Newbee 12
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum