Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Second boot of firefox freezes whole system [SOLVED]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
emptysea2000
n00b
n00b


Joined: 13 Apr 2012
Posts: 9

PostPosted: Mon Mar 25, 2013 7:28 pm    Post subject: Second boot of firefox freezes whole system [SOLVED] Reply with quote

Hi all. I have a very interesting problem. I've been running kernel 3.6 just fine for some time now, and everything works okay. I switched to kernel 3.7.10, and this problem surfaced.

On boot, slim starts up, and I'm able to log into XFCE okay. I can start a firefox session, and close a firefox session. Everything runs smoothly until I try to start another firefox session. The mouse freezes up, the keyboard is unresponsize, and shortly after, the display becomes garbled. SSH is also down, and the only way out is to hold the power button.

The 3.6 kernel seems to work fine, which makes me think there's some sort of kernel option I'm missing but I don't have any clue what it could be.

I'm not sure which commands to run to help troubleshoot the problem. I'm using an NVidia GPU, with the nouveau driver.


Last edited by emptysea2000 on Tue Mar 26, 2013 9:56 pm; edited 1 time in total
Back to top
View user's profile Send private message
Chiitoo
l33t
l33t


Joined: 28 Feb 2010
Posts: 922
Location: Here and Away Again

PostPosted: Tue Mar 26, 2013 2:58 am    Post subject: ><)))°€ Reply with quote

Teegrins, emptysea2000!


That certainly seems peculiar, and while I can't tell anything obvious right away, here are some things I think I'd do myself in no particular order:
  • Check if the Firefox process did actually shut down properly, and didn't linger on (in which case, I don't think another instance of Firefox should fire up though I may remember wrong).
  • Look into the /var/log/messages for interesting entries.
  • Run Firefox from a terminal to see if there would be related output.
  • Make note of memory and other resource usage.
I could be ways off, but when I think of it, I feel as if something is messing up in the RAM, or something similar. Just has the sort of a feel to it, but that's really just an uneducated guess.

One question: is this www-client/firefox or www-client/firefox-bin, or both? My www-client/firefox actually started acting weirdly some time ago, best described as the interface being slow and/or sluggish. I'm pretty sure it's only the said application; I don't think I noticed it having a greater effect.

I tried the bin-version, and it does not seem to exhibit the same behaviour. I have not yet looked into it more at all, but in any case, I think it might be a good idea to post your

Code:
emerge --info firefox

or

Code:
emerge --info firefox-bin

or both.


I hope someone else can spot the issue better than I, but I hope this can be of some help, too!

Good luck~
_________________
Kind Regards,
~ The Noob Unlimited ~

Sore wa sore, kore wa kore.
Back to top
View user's profile Send private message
emptysea2000
n00b
n00b


Joined: 13 Apr 2012
Posts: 9

PostPosted: Tue Mar 26, 2013 12:56 pm    Post subject: Reply with quote

1. Usually when firefox isn't done cleaning up, a dialog box will pop up saying another instance of firefox is still going. This never occurred, but I'll double check it to make sure this isn't the case.

2. I don't see anything relevent here.

3. I opened a terminal and tried to start firefox there.

Code:
firefox -vvv > firefox.log


Same issue, and when I rebooted the machine the log file was empty.

4. This is impossible, as everything just stops working. Before this occurs, memory and CPU usage seem sane.


Code:
emerge --info firefox

Portage 2.1.11.55 (default/linux/amd64/13.0, gcc-4.6.3, glibc-2.15-r3, 3.7.10-gentoo x86_64)
=================================================================
                        System Settings
=================================================================
System uname: Linux-3.7.10-gentoo-x86_64-AMD_FX-tm-4100_Quad-Core_Processor-with-gentoo-2.1
KiB Mem:     3795364 total,   2958856 free
KiB Swap:    2097148 total,   2097148 free
Timestamp of tree: Fri, 22 Mar 2013 18:45:01 +0000
ld GNU ld (GNU Binutils) 2.22
app-shells/bash:          4.2_p37
dev-java/java-config:     2.1.12-r1
dev-lang/python:          2.7.3-r3, 3.2.3-r2
dev-util/cmake:           2.8.9
dev-util/pkgconfig:       0.28
sys-apps/baselayout:      2.1-r1
sys-apps/openrc:          0.11.8
sys-apps/sandbox:         2.5
sys-devel/autoconf:       2.13, 2.69
sys-devel/automake:       1.11.6
sys-devel/binutils:       2.22-r1
sys-devel/gcc:            4.6.3
sys-devel/gcc-config:     1.7.3
sys-devel/libtool:        2.4-r1
sys-devel/make:           3.82-r4
sys-kernel/linux-headers: 3.6 (virtual/os-headers)
sys-libs/glibc:           2.15-r3
Repositories: gentoo palmer sunrise seden gbin x-portage
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5.4/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="ftp://ftp.ussg.iu.edu/pub/linux/gentoo http://lug.mtu.edu/gentoo/ ftp://lug.mtu.edu/gentoo/"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j5"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/var/lib/layman/palmer /var/lib/layman/sunrise /var/lib/layman/seden /var/lib/layman/gbin /usr/local/portage"
SYNC="rsync://rsync.us.gentoo.org/gentoo-portage"
USE="X a52 aac acl alsa amd64 berkdb branding bzip2 cdda cdr cli consolekit cracklib crypt css cups cxx dbus declarative dri dts dvb dvd dvdnav dvdr encode extras fortran g3dvl gdbm gpm hal iconv jpeg lame lock mmx modules mp3 mpeg mudflap multilib ncurses nls nptl ogg openmp pam pcre png policykit pulseaudio readline scanner session spell sse sse2 ssl startup-notification svg tcpd theora thunar udev unicode usb v4l v4l2 vorbis webkit xine xvid xvmc zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="en" PHP_TARGETS="php5-3" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_2" RUBY_TARGETS="ruby18 ruby19" SANE_BACKENDS="epson epson2" USERLAND="GNU" VIDEO_CARDS="nouveau" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON

=================================================================
                        Package Settings
=================================================================

www-client/firefox-17.0.4 was built with the following:
USE="alsa dbus jit (multilib) startup-notification -bindist -custom-cflags -custom-optimization -debug -gstreamer -libnotify -minimal (-pgo) (-selinux) -system-sqlite -wifi" ABI_X86="64" LINGUAS="-af -ak -ar -as -ast -be -bg -bn_BD -bn_IN -br -bs -ca -cs -csb -cy -da -de -el -en_GB -en_ZA -eo -es_AR -es_CL -es_ES -es_MX -et -eu -fa -fi -fr -fy_NL -ga_IE -gd -gl -gu_IN -he -hi_IN -hr -hu -hy_AM -id -is -it -ja -kk -km -kn -ko -ku -lg -lt -lv -mai -mk -ml -mr -nb_NO -nl -nn_NO -nso -or -pa_IN -pl -pt_BR -pt_PT -rm -ro -ru -si -sk -sl -son -sq -sr -sv_SE -ta -ta_LK -te -th -tr -uk -vi -zh_CN -zh_TW -zu"
CFLAGS="-march=native -pipe -mno-avx"
CXXFLAGS="-march=native -pipe -mno-avx"
Back to top
View user's profile Send private message
ulenrich
Veteran
Veteran


Joined: 10 Oct 2010
Posts: 1194

PostPosted: Tue Mar 26, 2013 3:24 pm    Post subject: Reply with quote

Before you start firefox, look if xfce has a session management in place to start it:
ps -A |grep firefox

Then try kill firefox! And try
firefox -safe-mode -ProfileManager
Look in a terminal at firefox -help for more.
_________________
fun2gen2
Back to top
View user's profile Send private message
emptysea2000
n00b
n00b


Joined: 13 Apr 2012
Posts: 9

PostPosted: Tue Mar 26, 2013 5:21 pm    Post subject: Reply with quote

ulenrich wrote:

firefox -safe-mode -ProfileManager
Look in a terminal at firefox -help for more.


Both causes the strange symptom to occur.

Surprisingly, firefox --help will output the help screen before locking up and garbling the display.
Back to top
View user's profile Send private message
Ant P.
Advocate
Advocate


Joined: 18 Apr 2009
Posts: 2592
Location: UK

PostPosted: Tue Mar 26, 2013 5:25 pm    Post subject: Reply with quote

Might be a problem with the graphics card driver. Try running "export LIBGL_ALWAYS_SOFTWARE=1" and then run firefox from the same terminal and see if it still happens that way.
Back to top
View user's profile Send private message
chiefbag
Guru
Guru


Joined: 01 Oct 2010
Posts: 440
Location: The Kingdom of Kerry

PostPosted: Tue Mar 26, 2013 5:29 pm    Post subject: Reply with quote

Could be a graphics card module issue.
Are you running FGLRX or Nvidia?

Post the output of dmesg.

Code:
dmesg

_________________
A place for useful technical information
Back to top
View user's profile Send private message
emptysea2000
n00b
n00b


Joined: 13 Apr 2012
Posts: 9

PostPosted: Tue Mar 26, 2013 6:02 pm    Post subject: Reply with quote

I'm using the nouveau driver in the kernel (NVidia).

Here's dmesg:

Code:
[    0.878281] pnp 00:02: [io  0x0022-0x003f]
[    0.878282] pnp 00:02: [io  0x0044-0x005f]
[    0.878283] pnp 00:02: [io  0x0062-0x0063]
[    0.878284] pnp 00:02: [io  0x0065-0x006f]
[    0.878285] pnp 00:02: [io  0x0074-0x007f]
[    0.878286] pnp 00:02: [io  0x0091-0x0093]
[    0.878287] pnp 00:02: [io  0x00a2-0x00bf]
[    0.878288] pnp 00:02: [io  0x00e0-0x00ef]
[    0.878290] pnp 00:02: [io  0x04d0-0x04d1]
[    0.878291] pnp 00:02: [io  0x0800-0x087f]
[    0.878292] pnp 00:02: [io  0x0295-0x0296]
[    0.878293] pnp 00:02: [io  0x0290-0x0294]
[    0.878353] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.878390] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.878427] system 00:02: [io  0x0295-0x0296] has been reserved
[    0.878464] system 00:02: [io  0x0290-0x0294] has been reserved
[    0.878502] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.878511] pnp 00:03: [dma 4]
[    0.878512] pnp 00:03: [io  0x0000-0x000f]
[    0.878515] pnp 00:03: [io  0x0080-0x0090]
[    0.878516] pnp 00:03: [io  0x0094-0x009f]
[    0.878518] pnp 00:03: [io  0x00c0-0x00df]
[    0.878560] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.878595] pnp 00:04: [irq 0 disabled]
[    0.878605] pnp 00:04: [irq 8]
[    0.878606] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
[    0.878651] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.878671] pnp 00:05: [io  0x0070-0x0073]
[    0.878714] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.878720] pnp 00:06: [io  0x0061]
[    0.878762] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.878769] pnp 00:07: [io  0x00f0-0x00ff]
[    0.878777] pnp 00:07: [irq 13]
[    0.878823] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.879036] pnp 00:08: [io  0x03f8-0x03ff]
[    0.879043] pnp 00:08: [irq 4]
[    0.879110] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.879269] pnp 00:09: [io  0x0378-0x037f]
[    0.879276] pnp 00:09: [irq 7]
[    0.879333] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.879795] pnp 00:0a: [mem 0xe0000000-0xe7ffffff]
[    0.879856] system 00:0a: [mem 0xe0000000-0xe7ffffff] could not be reserved
[    0.879896] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.880006] pnp 00:0b: [mem 0x000cec00-0x000cffff]
[    0.880008] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[    0.880010] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[    0.880011] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[    0.880012] pnp 00:0b: [mem 0xbfee0000-0xbfeeffff]
[    0.880013] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[    0.880014] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[    0.880015] pnp 00:0b: [mem 0x00100000-0xbfedffff]
[    0.880017] pnp 00:0b: [mem 0xbfef0000-0xbfefffff]
[    0.880018] pnp 00:0b: [mem 0xbff00000-0xbfffffff]
[    0.880019] pnp 00:0b: [mem 0xc0000000-0xcfffffff]
[    0.880020] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    0.880021] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    0.880083] system 00:0b: [mem 0x000cec00-0x000cffff] has been reserved
[    0.880122] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.880160] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.880199] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.880237] system 00:0b: [mem 0xbfee0000-0xbfeeffff] could not be reserved
[    0.880276] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[    0.880313] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.880352] system 00:0b: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.880390] system 00:0b: [mem 0xbfef0000-0xbfefffff] has been reserved
[    0.880428] system 00:0b: [mem 0xbff00000-0xbfffffff] could not be reserved
[    0.880466] system 00:0b: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.880504] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.880543] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.880581] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.880593] pnp: PnP ACPI: found 12 devices
[    0.880628] ACPI: ACPI bus type pnp unregistered
[    0.885243] pci 0000:00:0d.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[    0.885283] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.885319] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.885358] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.885397] pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.885440] pci 0000:00:04.0: setting latency timer to 64
[    0.885442] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.885444] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.885445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.885447] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.885448] pci_bus 0000:00: resource 8 [mem 0xe4000000-0xfebfffff]
[    0.885449] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xdfffffff]
[    0.885451] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.885453] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.885454] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[    0.885456] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.885457] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.885458] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.885460] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[    0.885461] pci_bus 0000:01: resource 8 [mem 0xe4000000-0xfebfffff]
[    0.885462] pci_bus 0000:01: resource 9 [mem 0xd0000000-0xdfffffff]
[    0.885527] NET: Registered protocol family 2
[    0.885718] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.886527] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.886753] TCP: Hash tables configured (established 262144 bind 65536)
[    0.886814] TCP: reno registered
[    0.886849] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.886898] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.887015] NET: Registered protocol family 1
[    0.887192] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.963738] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.963841] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.963923] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964010] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964098] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964187] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964227] pci 0000:00:0d.0: Boot video device
[    0.964234] PCI: CLS 0 bytes, default 64
[    0.964262] Trying to unpack rootfs image as initramfs...
[    1.323101] Freeing initrd memory: 3356k freed
[    1.324078] PCI-DMA: Disabling AGP.
[    1.324166] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.324202] PCI-DMA: using GART IOMMU.
[    1.324237] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.327873] LVT offset 0 assigned for vector 0x400
[    1.327933] perf: AMD IBS detected (0x000000ff)
[    1.328319] audit: initializing netlink socket (disabled)
[    1.328362] type=2000 audit(1364318237.680:1): initialized
[    1.328862] VFS: Disk quotas dquot_6.5.2
[    1.328916] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.329204] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.329279] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    1.329557] OCFS2 1.5.0
[    1.329650] ocfs2: Registered cluster interface o2cb
[    1.329685] OCFS2 DLMFS 1.5.0
[    1.329750] OCFS2 User DLM kernel interface loaded
[    1.329786] OCFS2 Node Manager 1.5.0
[    1.329893] OCFS2 DLM 1.5.0
[    1.330150] GFS2 installed
[    1.330185] msgmni has been set to 7411
[    1.330476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.330515] io scheduler noop registered
[    1.330549] io scheduler deadline registered
[    1.330599] io scheduler cfq registered (default)
[    1.330884] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.351435] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.351935] Linux agpgart interface v0.103
[    1.352188] [drm] Initialized drm 1.1.0 20060810
[    1.354042] brd: module loaded
[    1.355031] loop: module loaded
[    1.355320] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.388177] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.388216] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.633369] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.633586] mousedev: PS/2 mouse device common for all mice
[    1.633742] rtc_cmos 00:05: RTC can wake from S4
[    1.633944] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.634017] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.634087] cpuidle: using governor ladder
[    1.634122] cpuidle: using governor menu
[    1.634322] TCP: cubic registered
[    1.634356] NET: Registered protocol family 17
[    1.634860] registered taskstats version 1
[    1.635104] rtc_cmos 00:05: setting system clock to 2013-03-26 17:17:18 UTC (1364318238)
[    1.636048] Freeing unused kernel memory: 512k freed
[    1.680215] ACPI: bus type scsi registered
[    1.680419] libata version 3.00 loaded.
[    2.285793] sata_nv 0000:00:08.0: version 3.5
[    2.285918] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    2.285982] sata_nv 0000:00:08.0: setting latency timer to 64
[    2.286466] scsi0 : sata_nv
[    2.286680] scsi1 : sata_nv
[    2.286858] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[    2.286861] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[    2.286969] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    2.286997] sata_nv 0000:00:08.1: setting latency timer to 64
[    2.287498] scsi2 : sata_nv
[    2.287690] scsi3 : sata_nv
[    2.287873] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[    2.287876] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[    2.322905] tsc: Refined TSC clocksource calibration: 3616.449 MHz
[    2.322910] Switching to clocksource tsc
[    2.623135] ata3: SATA link down (SStatus 0 SControl 300)
[    2.772680] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.802762] ata1.00: ATA-7: WDC WD2000JS-60NCB1, 10.02E02, max UDMA/100
[    2.802764] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.842743] ata1.00: configured for UDMA/100
[    2.842828] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2000JS-60N 10.0 PQ: 0 ANSI: 5
[    2.843088] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    2.843132] sd 0:0:0:0: [sda] Write Protect is off
[    2.843136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.843156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.854867]  sda: sda1 sda2 sda3
[    2.855313] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.332378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.352467] ata2.00: ATAPI: ASUS    DRW-24B1ST   c, 1.05, max UDMA/100
[    3.402432] ata2.00: configured for UDMA/100
[    3.406008] scsi 1:0:0:0: CD-ROM            ASUS     DRW-24B1ST   c   1.05 PQ: 0 ANSI: 5
[    3.408931] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.408933] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.409100] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.843293] ACPI: Invalid Power Resource to register!
[    3.409325] ACPI: Invalid Power Resource to register!
[    3.742547] ata4: SATA link down (SStatus 0 SControl 300)
[    3.992674] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.992748] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.158601] scsi: <fdomain> Detection failed (no card)
[    4.243818] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.336481] imm: Version 2.05 (for Linux 2.4.0)
[    4.529435] Fusion MPT base driver 3.04.20
[    4.529437] Copyright (c) 1999-2008 LSI Corporation
[    4.581564] Fusion MPT SPI Host driver 3.04.20
[    4.619182] Fusion MPT FC Host driver 3.04.20
[    4.651720] Fusion MPT SAS Host driver 3.04.20
[    4.677213] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.703236] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.729273] Compaq SMART2 Driver (v 2.6.0)
[    4.787705] HP CISS Driver (v 3.6.26)
[    4.869573] Adaptec aacraid driver 1.2-0[29800]-ms
[    4.928068] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    4.929186] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    4.984615] megasas: 06.504.01.00-rc1 Mon. Oct. 1 17:00:00 PDT 2012
[    5.016186] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.07-k.
[    5.048138] Emulex LightPulse Fibre Channel SCSI driver 8.3.35
[    5.048139] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    5.115470] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    5.158461] ACPI: bus type usb registered
[    5.158564] usbcore: registered new interface driver usbfs
[    5.158619] usbcore: registered new interface driver hub
[    5.158679] usbcore: registered new device driver usb
[    5.160308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.160429] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    5.160433] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    5.160441] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    5.160451] ehci_hcd 0000:00:02.1: debug port 1
[    5.160468] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    5.160485] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[    5.171406] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    5.171426] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.171428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.171430] usb usb1: Product: EHCI Host Controller
[    5.171432] usb usb1: Manufacturer: Linux 3.7.10-gentoo ehci_hcd
[    5.171433] usb usb1: SerialNumber: 0000:00:02.1
[    5.171612] hub 1-0:1.0: USB hub found
[    5.171616] hub 1-0:1.0: 10 ports detected
[    5.208452] Initializing USB Mass Storage driver...
[    5.208501] usbcore: registered new interface driver usb-storage
[    5.208502] USB Mass Storage support registered.
[    5.240548] uhci_hcd: USB Universal Host Controller Interface driver
[    5.273198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.273283] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    5.273285] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    5.273291] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    5.273313] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[    5.333317] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.333320] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.333321] usb usb2: Product: OHCI Host Controller
[    5.333322] usb usb2: Manufacturer: Linux 3.7.10-gentoo ohci_hcd
[    5.333323] usb usb2: SerialNumber: 0000:00:02.0
[    5.333505] hub 2-0:1.0: USB hub found
[    5.333512] hub 2-0:1.0: 10 ports detected
[    5.367476] usbcore: registered new interface driver usbhid
[    5.367477] usbhid: USB HID core driver
[    5.611143] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[    5.763432] usb 1-5: New USB device found, idVendor=050d, idProduct=845a
[    5.763436] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.763438] usb 1-5: Product: Belkin USB Wireless Adaptor
[    5.763440] usb 1-5: Manufacturer: Manufacturer Realtek
[    5.763442] usb 1-5: SerialNumber: 00e04c000001
[    5.881000] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[    5.966712] device-mapper: uevent: version 1.0.3
[    5.966812] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    6.044032] usb 1-6: New USB device found, idVendor=0bb4, idProduct=0ff9
[    6.044035] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.044036] usb 1-6: Product: Android Phone
[    6.044038] usb 1-6: Manufacturer: HTC
[    6.044039] usb 1-6: SerialNumber: HT15SHL12408
[    6.045637] scsi4 : usb-storage 1-6:1.0
[    6.240391] md: raid0 personality registered for level 0
[    6.276903] md: raid1 personality registered for level 1
[    6.325184] async_tx: api initialized (async)
[    6.490673] raid6: sse2x1    4437 MB/s
[    6.540652] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[    6.660578] raid6: sse2x2    8423 MB/s
[    6.761554] usb 2-2: New USB device found, idVendor=1267, idProduct=0103
[    6.761557] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.772798] input: HID 1267:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0
[    6.772966] hid-generic 0003:1267:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:02.0-2/input0
[    6.783651] input: HID 1267:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input1
[    6.783804] hid-generic 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:02.0-2/input1
[    6.830491] raid6: sse2x4   11446 MB/s
[    6.830492] raid6: using algorithm sse2x4 (11446 MB/s)
[    6.830493] raid6: using ssse3x2 recovery algorithm
[    6.852363] xor: automatically using best checksumming function:
[    6.950420]    avx       : 11451.200 MB/sec
[    6.958208] md: raid6 personality registered for level 6
[    6.958210] md: raid5 personality registered for level 5
[    6.958211] md: raid4 personality registered for level 4
[    6.999536] md: raid10 personality registered for level 10
[    7.037987] md: linear personality registered for level -1
[    7.042516] scsi 4:0:0:0: Direct-Access     HTC      Android Phone    0100 PQ: 0 ANSI: 2
[    7.043132] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    7.048502] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    7.076981] md: multipath personality registered for level -4
[    7.120365] usb 2-3: new low-speed USB device number 3 using ohci_hcd
[    7.124035] JFS: nTxBlock = 8192, nTxLock = 65536
[    7.177278] RPC: Registered named UNIX socket transport module.
[    7.177279] RPC: Registered udp transport module.
[    7.177280] RPC: Registered tcp transport module.
[    7.177280] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.226999] fuse init (API version 7.20)
[    7.268455] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.268456] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.347241] usb 2-3: New USB device found, idVendor=0458, idProduct=0007
[    7.347244] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.347245] usb 2-3: Product: HP USB WHEEL MOUSE
[    7.347246] usb 2-3: Manufacturer: HP
[    7.357429] Loading iSCSI transport class v2.0-870.
[    7.357460] input: HP HP USB WHEEL MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
[    7.357749] hid-generic 0003:0458:0007.0003: input,hidraw2: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on usb-0000:00:02.0-3/input0
[   17.632997] EXT3-fs (sda3): recovery required on readonly filesystem
[   17.632998] EXT3-fs (sda3): write access will be enabled during recovery
[   18.398643] kjournald starting.  Commit interval 5 seconds
[   18.398681] EXT3-fs (sda3): orphan cleanup on readonly fs
[   18.398685] ext3_orphan_cleanup: deleting unreferenced inode 1474594
[   18.398704] ext3_orphan_cleanup: deleting unreferenced inode 1474581
[   18.398708] ext3_orphan_cleanup: deleting unreferenced inode 1474579
[   18.398712] ext3_orphan_cleanup: deleting unreferenced inode 1474578
[   18.398717] ext3_orphan_cleanup: deleting unreferenced inode 1474575
[   18.398721] ext3_orphan_cleanup: deleting unreferenced inode 1474572
[   18.398725] EXT3-fs (sda3): 6 orphan inodes deleted
[   18.482036] EXT3-fs (sda3): recovery complete
[   18.482038] EXT3-fs (sda3): mounted filesystem with ordered data mode
[   22.388272] systemd-udevd[16511]: starting version 197
[   23.534841] parport_pc 00:09: reported by Plug and Play ACPI
[   23.534883] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   23.622453] ppdev: user-space parallel port driver
[   23.740830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   23.740878] ACPI: Power Button [PWRB]
[   23.740941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   23.740966] ACPI: Power Button [PWRF]
[   23.747391] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   23.877140] kvm: disabled by bios
[   23.930311] ACPI: acpi_idle registered with cpuidle
[   24.029933] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   24.029958] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[   24.143397] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   24.143535] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[   24.143542] forcedeth 0000:00:07.0: setting latency timer to 64
[   24.222200] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 3, addr 50:e5:49:da:49:ae
[   24.222203] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[   24.319261] acpi-cpufreq: overriding BIOS provided _PSD data
[   25.137747] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[   25.138190] r8712u: Staging version
[   25.138199] r8712u: register rtl8712_netdev_ops to netdev_ops
[   25.138201] r8712u: USB_SPEED_HIGH with 4 endpoints
[   25.138601] r8712u: Boot from EFUSE: Autoload OK
[   25.361000] wmi: Mapper loaded
[   25.421281] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   25.421284] hda_intel: Disabling MSI
[   25.421322] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[   25.526282] r8712u: CustomerID = 0x0000
[   25.526284] r8712u: MAC Address from efuse = 08:86:3b:bc:32:83
[   25.526285] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[   25.526309] usbcore: registered new interface driver r8712u
[   29.768491] nouveau 0000:00:0d.0: setting latency timer to 64
[   29.768647] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
[   29.768841] nouveau  [  DEVICE][0000:00:0d.0] BOOT0  : 0x04c000a2
[   29.768843] nouveau  [  DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[   29.768844] nouveau  [  DEVICE][0000:00:0d.0] Family : NV40
[   29.769551] nouveau  [   VBIOS][0000:00:0d.0] checking PRAMIN for image...
[   29.808648] nouveau  [   VBIOS][0000:00:0d.0] ... appears to be valid
[   29.808649] nouveau  [   VBIOS][0000:00:0d.0] using image from PRAMIN
[   29.808775] nouveau  [   VBIOS][0000:00:0d.0] BIT signature found
[   29.808778] nouveau  [   VBIOS][0000:00:0d.0] version 05.61.32.31
[   29.808882] nouveau  [     PFB][0000:00:0d.0] RAM type: unknown
[   29.808883] nouveau  [     PFB][0000:00:0d.0] RAM size: 256 MiB
[   29.834409] [TTM] Zone  kernel: Available graphics memory: 1897682 kiB
[   29.834410] [TTM] Initializing pool allocator
[   29.834414] [TTM] Initializing DMA pool allocator
[   29.840640] nouveau  [     DRM] VRAM: 253 MiB
[   29.840642] nouveau  [     DRM] GART: 512 MiB
[   29.840646] nouveau  [     DRM] BIT BIOS found
[   29.840648] nouveau  [     DRM] Bios version 05.61.32.31
[   29.840651] nouveau  [     DRM] TMDS table version 1.1
[   29.840652] nouveau  [     DRM] DCB version 3.0
[   29.840654] nouveau  [     DRM] DCB outp 00: 01000310 00000023
[   29.840655] nouveau  [     DRM] DCB outp 01: 00110204 942b0003
[   29.840657] nouveau  [     DRM] DCB conn 00: 0000
[   29.840658] nouveau  [     DRM] DCB conn 01: 1131
[   29.840660] nouveau  [     DRM] DCB conn 02: 0110
[   29.840661] nouveau  [     DRM] DCB conn 03: 0111
[   29.840662] nouveau  [     DRM] DCB conn 04: 0113
[   29.840763] nouveau  [     DRM] Saving VGA fonts
[   29.879803] nouveau W[     DRM] DCB type 4 not known
[   29.879805] nouveau W[     DRM] Unknown-1 has no encoders, removing
[   29.880858] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   29.880858] [drm] No driver support for vblank timestamp query.
[   29.881568] nouveau  [     DRM] 1 available performance level(s)
[   29.881570] nouveau  [     DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[   29.881571] nouveau  [     DRM] c:
[   29.882794] nouveau  [     DRM] MM: using M2MF for buffer copies
[   29.931652] nouveau  [     DRM] allocated 1024x768 fb: 0x9000, bo ffff8801274f8400
[   29.931705] fbcon: nouveaufb (fb0) is primary device
[   29.999826] Console: switching to colour frame buffer device 128x48
[   30.001201] fb0: nouveaufb frame buffer device
[   30.001202] drm: registered panic notifier
[   30.001205] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
[   33.561604] EXT3-fs (sda3): using internal journal
[   33.858874] Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 across:2097148k
[   36.473136] forcedeth 0000:00:07.0: irq 40 for MSI/MSI-X
[   36.473157] forcedeth 0000:00:07.0 eth0: MSI enabled
[   36.473375] forcedeth 0000:00:07.0 eth0: no link during initialization
[   41.572467] r8712u: 1 RCR=0x153f00e
[   41.573216] r8712u: 2 RCR=0x553f00e
[   43.786937] NET: Registered protocol family 10
[   43.787261] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   43.787281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   89.086905] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   90.595984] forcedeth 0000:00:07.0: irq 40 for MSI/MSI-X
[   90.596003] forcedeth 0000:00:07.0 eth0: MSI enabled
[   90.596222] forcedeth 0000:00:07.0 eth0: no link during initialization
[   90.596622] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   91.105957] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   96.644515] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  115.381379] r8712u: [r8712_got_addbareq_event_callback] mac = c8:d7:19:7c:9e:7f, seq = 0, tid = 0
Back to top
View user's profile Send private message
emptysea2000
n00b
n00b


Joined: 13 Apr 2012
Posts: 9

PostPosted: Tue Mar 26, 2013 6:34 pm    Post subject: Reply with quote

There is one more thing I noticed when trying to play around. Running glxinfo twice will trigger the freeze, too.
Back to top
View user's profile Send private message
emptysea2000
n00b
n00b


Joined: 13 Apr 2012
Posts: 9

PostPosted: Tue Mar 26, 2013 6:39 pm    Post subject: Reply with quote

I disabled the graphics acceleration for the nouveau driver, and it seems the problem has gone away. Perhaps graphics acceleration for nouveau isn't supported after kernel 3.6.
Back to top
View user's profile Send private message
ulenrich
Veteran
Veteran


Joined: 10 Oct 2010
Posts: 1194

PostPosted: Tue Mar 26, 2013 6:46 pm    Post subject: Reply with quote

When I proposed "-safe-mode"
I thought of deactivating glx-opengl features. But this -safe-mode option targets to deactivate extensions as I now remember.

You could either
- find the correct firefox configuration parameter to deactivate glx
- deactivate all glx, webgl, opengl of your system
- install the proprietary nvidia driver

[edit as I see your last post] nouveau has limited support of 3d features (Phoronix website shows many games working well). Not enough or problematic for some applications, as you experienced just now. But with nouveau getting better step by step you could try a newer unstable kernel?

[edit2]Menu-Edit-Preferences-Advanded-Generel
x Use-Hardware-Acceleration
deactivate!
_________________
fun2gen2
Back to top
View user's profile Send private message
emptysea2000
n00b
n00b


Joined: 13 Apr 2012
Posts: 9

PostPosted: Tue Mar 26, 2013 9:56 pm    Post subject: Reply with quote

Ahh excellent. The 3D effects aren't essential to this PC, so I'm satisfied. I'm marking this solved. Thanks for the help, everyone!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum