| View previous topic :: View next topic |
| Author |
Message |
Braindump
n00b
Joined: 16 Feb 2013
Posts: 14
|
 Posted: Sat Feb 16, 2013 5:49 pm Post subject: [SOLVED] Intel HD 4000 Graphics |
 |
|
Hallo,
ich habe eine Intel HD 4000 Graphics Grafikkarte in meinem Notebook und kriege sie nicht ans laufen.
Die Kernelconfig habe ich wie hier beschrieben eingerichtet (Kernel: gentoo-sources-3.6.11)
http://en.gentoo-wiki.com/wiki/Intel_GMA
dmesg | grep -i agp
liefert mir nichts.
Kann mir jemand helfen?
Grüße
Last edited by Braindump on Mon Feb 18, 2013 6:29 pm; edited 1 time in total |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54208
Location: 56N 3W
|
| Posted: Sat Feb 16, 2013 6:20 pm Post subject: |
|
|
Braindump,
Welocme to the Forums.
Sorry for not using German.
You need to follow the Intel wiki guide.
and/or The X Server Configuration HOWTO
The kernel config you link tells only of items you must configure on.
You must also configure off any framebuffer drivers. The intel driver provides a framebuffer console.
Error messages, if you get any, are useful too.
We prefer you to post in English on the main site but there is a German language subforum if you prefer.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Braindump
n00b
Joined: 16 Feb 2013
Posts: 14
|
| Posted: Sat Feb 16, 2013 6:55 pm Post subject: |
|
|
Hello,
I am Sorry for Using German.
I thought i was on the German Forum Site.
I thought i configure Off framebuffer but it didnt work.
Which error Messages do you Need?
Regards |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54208
Location: 56N 3W
|
| Posted: Sat Feb 16, 2013 7:07 pm Post subject: |
|
|
Braindump,
No problem with the language.
Do you see any error message at all?
Does the system boot to a console?
Please and run | Code: | | wgetpaste /usr/src/linux/.config |
and post the URL you get back.
That will put your kernel configuration file onto a pastebin.
What is the output of
Lots of questions for lots of information as I have little to go on right now.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Braindump
n00b
Joined: 16 Feb 2013
Posts: 14
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54208
Location: 56N 3W
|
| Posted: Sat Feb 16, 2013 9:43 pm Post subject: |
|
|
Braindump,
You kernel looks good. The only things I see that might upset the Intel driver is
CONFIG_FB_EFI=y
I don't know if that is compatible with the Intel driver or not.
Find that option in make menuconfig, set it off, the rebuild and reinstall your kernel.
Does you system boot then fail when you run startx ?
Kernel 3.6.11 x86_64 is only a part of uname -a.
| Code: | $ uname -a
Linux NeddySeagoon 3.7.1-gentoo #1 SMP PREEMPT Wed Dec 26 16:00:43 GMT 2012 x86_64 AMD Phenom(tm) II X6 1090T Processor AuthenticAMD GNU/Linux |
The interesting part is | Code: | | Wed Dec 26 16:00:43 GMT 2012 |
yours will differ. Thats the build time of the running kernel.
If you have built your kernel after the date/time shown in your uname -a, you are not running the kernel you think you are.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Braindump
n00b
Joined: 16 Feb 2013
Posts: 14
|
| Posted: Sun Feb 17, 2013 9:29 am Post subject: |
|
|
You are right, i am Running Not the kernel i think.
What is my fault |
|
| Back to top |
|
|
Braindump
n00b
Joined: 16 Feb 2013
Posts: 14
|
| Posted: Sun Feb 17, 2013 12:00 pm Post subject: |
|
|
Hello,
I am running now the correct kernel but with the same problems.
My xorg.0.log looks good i think:
http://bpaste.net/show/77822/
any ideas? |
|
| Back to top |
|
|
Jaglover
Watchman
Joined: 29 May 2005
Posts: 8291
Location: Saint Amant, Acadiana
|
| Posted: Sun Feb 17, 2013 12:15 pm Post subject: |
|
|
| Quote: | | 227.154] (++) Using config file: "/root/xorg.conf.new" |
Do not use xorg.conf with Intel driver, it is not needed. And do not run X as root. Just log into your user account and try startx. Make sure you run some application (or DE) on X, otherwise you will end up with black screen.
_________________
My Gentoo installation notes.
Please learn how to denote units correctly! |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54208
Location: 56N 3W
|
| Posted: Sun Feb 17, 2013 1:25 pm Post subject: |
|
|
Braindump,
You Xorg.0.log is good. It looks like Xorg started but didn't do anything as it found nothing to do.
As Jaglover says, Xorg will run normally without a xorg.conf file but it will give you a USA keyboard layout, which you will probably hate.
To get a German key layout, you will need a minimal xorg.conf.
If you have not given Xorg something to do yet, run | Code: | | emerge -1 twm xterm xclock |
This will provide the default setup for Xorg to use.
When that works, startx will show three xterm windows and an analogue clock all using twm.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
Braindump
n00b
Joined: 16 Feb 2013
Posts: 14
|
| Posted: Mon Feb 18, 2013 6:29 pm Post subject: |
|
|
Ok.
I'm sorry everything is ok.
Thx |
|
| Back to top |
|
|
|
Installing Gentoo
