View previous topic :: View next topic |
Author |
Message |
AAFA n00b
Joined: 15 Feb 2013 Posts: 2
|
Posted: Fri Feb 15, 2013 9:03 pm Post subject: DHCP not setting NAMSERVER vaules(fixed) |
|
|
New install in VIRTUALBOX guest.
Install complete and after reboots the /etc/resolv.conf keeps resetting.
here is my net file
[code]
o10222@virt-gentoo ~ $ cat /etc/conf.d/net
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /usr/share/doc/openrc*/net.example* and save your configuration
# in /etc/conf.d/net (this file :]!).
config_eth0="dhcp"
dns_servers_eth0="205.171.2.25 205.171.3.25"
[code/]
/etc/resolv.conf after reboot
[code]
o10222@virt-gentoo ~ $ cat /etc/resolv.conf
# Generated by dhcpcd from eth1, eth0
# /etc/resolv.conf.head can replace this line
nameserver 192.168.0.1
# /etc/resolv.conf.tail can replace this line
o10222@virt-gentoo ~ $
[code/]
did I miss something in setup or syntax in net file?
Two adapters are configured in VBOX 1 NAT 1 Bridge this one get DHCP assigned to it.
Last edited by AAFA on Fri Feb 15, 2013 10:11 pm; edited 1 time in total |
|
Back to top |
|
|
AAFA n00b
Joined: 15 Feb 2013 Posts: 2
|
Posted: Fri Feb 15, 2013 10:10 pm Post subject: resolv.conf settings |
|
|
Ok so i figured I would setup static I.P. for eth1 and it all works now.
maybe DHCP client gets bad information from my router but windows systems and MAC's seem fine.
anyways it fixed.
here is the working file:
[/code]
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /usr/share/doc/openrc*/net.example* and save your configuration
# in /etc/conf.d/net (this file :]!).
config_eth1="192.168.0.28 broadcast 192.0.0.255 netmask 255.255.255.0"
dns_servers="205.171.2.25 205.171.3.25"
[code/] |
|
Back to top |
|
|
|