cristi92b n00b
Joined: 26 Feb 2012 Posts: 29
|
Posted: Tue Feb 12, 2013 1:36 am Post subject: [Solved]Kernel panic - not syncing VFS |
|
|
I get the following kernel panic message:
Code: | Kernel panic - not syncing: VFS: Unable to mount root fs on unknow block(0,0) |
But I dont understand why, I included ext2,ext3,ext4 and SATA support....
/usr/src/linux/.config
Kernel config file
fdisk -l /dev/sda
Code: |
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xb32d51c8
Device Boot Start End Blocks Id System
/dev/sda1 * 1 45 358400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 45 33146 265881600 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 33146 113460 645120000 7 HPFS/NTFS
Partition 3 does not end on cylinder boundary.
/dev/sda4 113460 121602 65401560 5 Extended
Partition 4 does not end on cylinder boundary.
/dev/sda5 113460 113468 65536 83 Linux
/dev/sda6 113468 121537 64809688 83 Linux
/dev/sda7 121537 121602 523264 82 Linux swap / Solaris
|
/etc/fstab
Code: |
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed); notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/sda5 /boot ext2 noauto,noatime 1 2
/dev/sda6 / ext4 noatime 0 1
/dev/sda7 none swap sw 0 0
/dev/cdrom /mnt/cdrom auto noauto,ro,user 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
|
lspci -k
Code: |
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
Subsystem: Giga-byte Technology Device 5001
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
Subsystem: Giga-byte Technology Device 0c11
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
Subsystem: Giga-byte Technology Device 0c11
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
Subsystem: Giga-byte Technology Device 0c11
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ohci_hcd
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: ehci_hcd
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Subsystem: Giga-byte Technology Device a002
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
Subsystem: Giga-byte Technology Device 5002
Kernel driver in use: AMD_IDE
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
Subsystem: Giga-byte Technology Device e000
Kernel driver in use: forcedeth
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: sata_nv
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:06.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 61)
Subsystem: Agere Systems FW322/323
Kernel driver in use: ohci1394
02:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2)
Subsystem: Giga-byte Technology Device 34f2
02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
Subsystem: Giga-byte Technology Device 34f2
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
|
What I did wrong?
------------
It works now, grub syntax was the problem |
|