View previous topic :: View next topic |
Author |
Message |
Kurogane n00b
Joined: 23 May 2010 Posts: 44
|
Posted: Wed Oct 31, 2012 2:35 pm Post subject: IPv6 Address |
|
|
I'm trying to disable Privacy Extension but unable to do it.
I wanted to disable IPv6 random temporary addresses.
I tried with and still unsuccessful
Code: | sysctl -w net.ipv6.conf.all.use_tempaddr=0 |
Code: | sysctl -w net.ipv6.conf.all.use_tempaddr=1 |
|
|
Back to top |
|
|
py-ro Veteran
Joined: 24 Sep 2002 Posts: 1734 Location: Velbert
|
Posted: Wed Oct 31, 2012 2:57 pm Post subject: |
|
|
Show your Ouput from
Code: | ifconfig
or
ip -6 a s |
please. |
|
Back to top |
|
|
Kurogane n00b
Joined: 23 May 2010 Posts: 44
|
Posted: Sat Nov 03, 2012 2:02 pm Post subject: |
|
|
Sorry for the delay.
sysctl -a
Code: | net.ipv6.bindv6only = 0
net.ipv6.conf.all.accept_dad = 1
net.ipv6.conf.all.accept_ra = 1
net.ipv6.conf.all.accept_ra_defrtr = 1
net.ipv6.conf.all.accept_ra_pinfo = 1
net.ipv6.conf.all.accept_ra_rtr_pref = 1
net.ipv6.conf.all.accept_redirects = 1
net.ipv6.conf.all.accept_source_route = 0
net.ipv6.conf.all.autoconf = 1
net.ipv6.conf.all.dad_transmits = 1
net.ipv6.conf.all.disable_ipv6 = 0
net.ipv6.conf.all.force_mld_version = 0
net.ipv6.conf.all.force_tllao = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.all.hop_limit = 64
net.ipv6.conf.all.max_addresses = 16
net.ipv6.conf.all.max_desync_factor = 600
net.ipv6.conf.all.mtu = 1280
net.ipv6.conf.all.proxy_ndp = 0
net.ipv6.conf.all.regen_max_retry = 3
net.ipv6.conf.all.router_probe_interval = 60
net.ipv6.conf.all.router_solicitation_delay = 1
net.ipv6.conf.all.router_solicitation_interval = 4
net.ipv6.conf.all.router_solicitations = 3
net.ipv6.conf.all.temp_prefered_lft = 86400
net.ipv6.conf.all.temp_valid_lft = 604800
net.ipv6.conf.all.use_tempaddr = 0
net.ipv6.conf.default.accept_dad = 1
net.ipv6.conf.default.accept_ra = 1
net.ipv6.conf.default.accept_ra_defrtr = 1
net.ipv6.conf.default.accept_ra_pinfo = 1
net.ipv6.conf.default.accept_ra_rtr_pref = 1
net.ipv6.conf.default.accept_redirects = 1
net.ipv6.conf.default.accept_source_route = 0
net.ipv6.conf.default.autoconf = 1
net.ipv6.conf.default.dad_transmits = 1
net.ipv6.conf.default.disable_ipv6 = 0
net.ipv6.conf.default.force_mld_version = 0
net.ipv6.conf.default.force_tllao = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.default.hop_limit = 64
net.ipv6.conf.default.max_addresses = 16
net.ipv6.conf.default.max_desync_factor = 600
net.ipv6.conf.default.mtu = 1280
net.ipv6.conf.default.proxy_ndp = 0
net.ipv6.conf.default.regen_max_retry = 3
net.ipv6.conf.default.router_probe_interval = 60
net.ipv6.conf.default.router_solicitation_delay = 1
net.ipv6.conf.default.router_solicitation_interval = 4
net.ipv6.conf.default.router_solicitations = 3
net.ipv6.conf.default.temp_prefered_lft = 86400
net.ipv6.conf.default.temp_valid_lft = 604800
net.ipv6.conf.default.use_tempaddr = 0
net.ipv6.conf.eth0.accept_dad = 1
net.ipv6.conf.eth0.accept_ra = 1
net.ipv6.conf.eth0.accept_ra_defrtr = 1
net.ipv6.conf.eth0.accept_ra_pinfo = 1
net.ipv6.conf.eth0.accept_ra_rtr_pref = 1
net.ipv6.conf.eth0.accept_redirects = 1
net.ipv6.conf.eth0.accept_source_route = 0
net.ipv6.conf.eth0.autoconf = 1
net.ipv6.conf.eth0.dad_transmits = 1
net.ipv6.conf.eth0.disable_ipv6 = 0
net.ipv6.conf.eth0.force_mld_version = 0
net.ipv6.conf.eth0.force_tllao = 0
net.ipv6.conf.eth0.forwarding = 0
net.ipv6.conf.eth0.hop_limit = 64
net.ipv6.conf.eth0.max_addresses = 16
net.ipv6.conf.eth0.max_desync_factor = 600
net.ipv6.conf.eth0.mtu = 1500
net.ipv6.conf.eth0.proxy_ndp = 0
net.ipv6.conf.eth0.regen_max_retry = 3
net.ipv6.conf.eth0.router_probe_interval = 60
net.ipv6.conf.eth0.router_solicitation_delay = 1
net.ipv6.conf.eth0.router_solicitation_interval = 4
net.ipv6.conf.eth0.router_solicitations = 3
net.ipv6.conf.eth0.temp_prefered_lft = 86400
net.ipv6.conf.eth0.temp_valid_lft = 604800
net.ipv6.conf.eth0.use_tempaddr = 0
net.ipv6.conf.lo.accept_dad = -1
net.ipv6.conf.lo.accept_ra = 1
net.ipv6.conf.lo.accept_ra_defrtr = 1
net.ipv6.conf.lo.accept_ra_pinfo = 1
net.ipv6.conf.lo.accept_ra_rtr_pref = 1
net.ipv6.conf.lo.accept_redirects = 1
net.ipv6.conf.lo.accept_source_route = 0
net.ipv6.conf.lo.autoconf = 1
net.ipv6.conf.lo.dad_transmits = 1
net.ipv6.conf.lo.disable_ipv6 = 0
net.ipv6.conf.lo.force_mld_version = 0
net.ipv6.conf.lo.force_tllao = 0
net.ipv6.conf.lo.forwarding = 0
net.ipv6.conf.lo.hop_limit = 64
net.ipv6.conf.lo.max_addresses = 16
net.ipv6.conf.lo.max_desync_factor = 600
net.ipv6.conf.lo.mtu = 16436
net.ipv6.conf.lo.proxy_ndp = 0
net.ipv6.conf.lo.regen_max_retry = 3
net.ipv6.conf.lo.router_probe_interval = 60
net.ipv6.conf.lo.router_solicitation_delay = 1
net.ipv6.conf.lo.router_solicitation_interval = 4
net.ipv6.conf.lo.router_solicitations = 3
net.ipv6.conf.lo.temp_prefered_lft = 86400
net.ipv6.conf.lo.temp_valid_lft = 604800
net.ipv6.conf.lo.use_tempaddr = -1
net.ipv6.conf.sit0.accept_dad = -1
net.ipv6.conf.sit0.accept_ra = 1
net.ipv6.conf.sit0.accept_ra_defrtr = 1
net.ipv6.conf.sit0.accept_ra_pinfo = 1
net.ipv6.conf.sit0.accept_ra_rtr_pref = 1
net.ipv6.conf.sit0.accept_redirects = 1
net.ipv6.conf.sit0.accept_source_route = 0
net.ipv6.conf.sit0.autoconf = 1
net.ipv6.conf.sit0.dad_transmits = 1
net.ipv6.conf.sit0.disable_ipv6 = 0
net.ipv6.conf.sit0.force_mld_version = 0
net.ipv6.conf.sit0.force_tllao = 0
net.ipv6.conf.sit0.forwarding = 0
net.ipv6.conf.sit0.hop_limit = 64
net.ipv6.conf.sit0.max_addresses = 16
net.ipv6.conf.sit0.max_desync_factor = 600
net.ipv6.conf.sit0.mtu = 1480
net.ipv6.conf.sit0.proxy_ndp = 0
net.ipv6.conf.sit0.regen_max_retry = 3
net.ipv6.conf.sit0.router_probe_interval = 60
net.ipv6.conf.sit0.router_solicitation_delay = 1
net.ipv6.conf.sit0.router_solicitation_interval = 4
net.ipv6.conf.sit0.router_solicitations = 3
net.ipv6.conf.sit0.temp_prefered_lft = 86400
net.ipv6.conf.sit0.temp_valid_lft = 604800
net.ipv6.conf.sit0.use_tempaddr = -1
net.ipv6.icmp.ratelimit = 1000
net.ipv6.ip6frag_high_thresh = 262144
net.ipv6.ip6frag_low_thresh = 196608
net.ipv6.ip6frag_secret_interval = 600
net.ipv6.ip6frag_time = 60
net.ipv6.mld_max_msf = 64
net.ipv6.neigh.default.anycast_delay = 99
net.ipv6.neigh.default.app_solicit = 0
net.ipv6.neigh.default.base_reachable_time_ms = 30000
net.ipv6.neigh.default.delay_first_probe_time = 5
net.ipv6.neigh.default.gc_interval = 30
net.ipv6.neigh.default.gc_stale_time = 60
net.ipv6.neigh.default.gc_thresh1 = 128
net.ipv6.neigh.default.gc_thresh2 = 512
net.ipv6.neigh.default.gc_thresh3 = 1024
net.ipv6.neigh.default.locktime = 0
net.ipv6.neigh.default.mcast_solicit = 3
net.ipv6.neigh.default.proxy_delay = 79
net.ipv6.neigh.default.proxy_qlen = 64
net.ipv6.neigh.default.retrans_time_ms = 1000
net.ipv6.neigh.default.ucast_solicit = 3
net.ipv6.neigh.default.unres_qlen = 32
net.ipv6.neigh.default.unres_qlen_bytes = 65536
net.ipv6.neigh.eth0.anycast_delay = 99
net.ipv6.neigh.eth0.app_solicit = 0
net.ipv6.neigh.eth0.base_reachable_time_ms = 30000
net.ipv6.neigh.eth0.delay_first_probe_time = 5
net.ipv6.neigh.eth0.gc_stale_time = 60
net.ipv6.neigh.eth0.locktime = 0
net.ipv6.neigh.eth0.mcast_solicit = 3
net.ipv6.neigh.eth0.proxy_delay = 79
net.ipv6.neigh.eth0.proxy_qlen = 64
net.ipv6.neigh.eth0.retrans_time_ms = 1000
net.ipv6.neigh.eth0.ucast_solicit = 3
net.ipv6.neigh.eth0.unres_qlen = 32
net.ipv6.neigh.eth0.unres_qlen_bytes = 65536
net.ipv6.neigh.lo.anycast_delay = 99
net.ipv6.neigh.lo.app_solicit = 0
net.ipv6.neigh.lo.base_reachable_time_ms = 30000
net.ipv6.neigh.lo.delay_first_probe_time = 5
net.ipv6.neigh.lo.gc_stale_time = 60
net.ipv6.neigh.lo.locktime = 0
net.ipv6.neigh.lo.mcast_solicit = 3
net.ipv6.neigh.lo.proxy_delay = 79
net.ipv6.neigh.lo.proxy_qlen = 64
net.ipv6.neigh.lo.retrans_time_ms = 1000
net.ipv6.neigh.lo.ucast_solicit = 3
net.ipv6.neigh.lo.unres_qlen = 32
net.ipv6.neigh.lo.unres_qlen_bytes = 65536
net.ipv6.neigh.sit0.anycast_delay = 99
net.ipv6.neigh.sit0.app_solicit = 0
net.ipv6.neigh.sit0.base_reachable_time_ms = 30000
net.ipv6.neigh.sit0.delay_first_probe_time = 5
net.ipv6.neigh.sit0.gc_stale_time = 60
net.ipv6.neigh.sit0.locktime = 0
net.ipv6.neigh.sit0.mcast_solicit = 3
net.ipv6.neigh.sit0.proxy_delay = 79
net.ipv6.neigh.sit0.proxy_qlen = 64
net.ipv6.neigh.sit0.retrans_time_ms = 1000
net.ipv6.neigh.sit0.ucast_solicit = 3
net.ipv6.neigh.sit0.unres_qlen = 32
net.ipv6.neigh.sit0.unres_qlen_bytes = 65536
net.ipv6.route.gc_elasticity = 9
net.ipv6.route.gc_interval = 30
net.ipv6.route.gc_min_interval = 0
net.ipv6.route.gc_min_interval_ms = 500
net.ipv6.route.gc_thresh = 1024
net.ipv6.route.gc_timeout = 60
net.ipv6.route.max_size = 4096
net.ipv6.route.min_adv_mss = 1220
net.ipv6.route.mtu_expires = 600
net.ipv6.xfrm6_gc_thresh = 1024 |
ifconfig
Code: |
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 2001:xxx:x:xxx::2 prefixlen 64 scopeid 0x0<global>
inet6 fe80::xxxx:30ff:fe47:d17a prefixlen 64 scopeid 0x20<link>
inet6 2001:xxx:x:xxx:22cf:30ff:fe47:d17a prefixlen 64 scopeid 0x0<global>
ether xx:xx:30:47:d1:7a txqueuelen 1000 (Ethernet)
RX packets 1673 bytes 1026785 (1002.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1456 bytes 283325 (276.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 5 |
ip -6 a s
Code: | 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 2001:xxx:x:xxx:22cf:30ff:fe47:d17a/64 scope global dynamic
valid_lft 86347sec preferred_lft 14347sec
inet6 2001:xxx:x:xxx::2/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::xxxx:30ff:fe47:d17a/64 scope link
valid_lft forever preferred_lft forever |
2001:xxx:x:xxx::2/64 is the static ip i set and i want to display.
Thanks. |
|
Back to top |
|
|
Ant P. Watchman
Joined: 18 Apr 2009 Posts: 6920
|
Posted: Sat Nov 03, 2012 2:21 pm Post subject: |
|
|
Your other addresses are neither random, temporary, nor privacy extension addresses. As you can see, they are autoconfig addresses based on your MAC address (20cf3047d17a).
If you really want to disable Privacy Extensions, why don't you just compile it out of your kernel? |
|
Back to top |
|
|
Kurogane n00b
Joined: 23 May 2010 Posts: 44
|
Posted: Sun Nov 04, 2012 2:16 pm Post subject: |
|
|
I know is autoconfig via MAC address because in one site i test ipv6 say that.
First kernel by "default" is disable Privacy Extensions seeing I still generating IP Address so i choose to enable in kernel and then deactivate manually via sysctl but fail to do it. |
|
Back to top |
|
|
boospy Guru
Joined: 07 Feb 2010 Posts: 308 Location: Austria
|
Posted: Wed Jan 02, 2013 10:25 pm Post subject: |
|
|
It is easy to do. I enable this in autostart (/etc/local.d/privacy_ivp6.start) with the command:
Code: | echo 2 >/proc/sys/net/ipv6/conf/all/use_tempaddr |
So, you can disable this with "echo... i think 1
The Kernelconfig says:
Code: | By default the kernel does not generate temporary addresses.
to use temporary addresses, do
echo 2 >/proc/sys/net/ipv6/conf/all/use_tempaddr
See <file:Documentation/networking/ip-sysctl.txt> for details. |
Greetings
boospy |
|
Back to top |
|
|
|