View previous topic :: View next topic |
Author |
Message |
Jerrino n00b
Joined: 25 Dec 2012 Posts: 21
|
Posted: Tue Dec 25, 2012 10:58 pm Post subject: Can't install from USB |
|
|
A big hello to all, I am writing here because I have a problem seemingly "insurmountable." But first some assumptions: currently I consider myself a "power newbie", a noob well informed and "receptive" but still noob .. hehehe.
However, I come from years of using GNU / Linux distros, but always Ubuntu or derivates. Since I recently build a machine a bit 'better performance, I decided to make the "big jump" to carve out a Gentoo system adapted to the potential of my hardware. At the moment, it is only a leap of faith.
First things first: I configured a machine with the following components:
M / B: Asus Crosshair V Formula
CPU: AMD FX-8150 8 Core
RAM: 16 GB
VGA: nVidia 550 Ti 1GB Ram
HDD: IBM 1 TB Sata
Keyboard logitech G19 <- attention to this.
So, I downloaded both LiveDVD and minimal, and with unetbootin I made a USB bootable stick. The system starts, until the moment in which I have to choose the keyboard mapping. At that point the keyboard leds go out, I can not select anything. Not bad, I think, I will change later, but at that point it the USB stick is not more recognized, and does not continue the installation, as if the USB system is "stopped". What's going on?
Thanks for your attention.
PS. Sorry for my english, I made this post in the Italian section too.. _________________ Free your PC.. Free your Mind!!
ASUS Crosshair V formula - AMD FX-8150
16GB DDR3 - Nvidia GTX 550 Ti |
|
Back to top |
|
|
The Doctor Moderator
Joined: 27 Jul 2010 Posts: 2678
|
Posted: Tue Dec 25, 2012 11:11 pm Post subject: |
|
|
Welcome to Gentoo! Your English is very good.
The problem is in kernel support for USB devices. I recommend that you use The System Rescue CD to install. There is no difference from the Gentoo CD, except it has better hardware support and xfce.
You can also use any of your Ubuntu based CDs as long as they have chroot installed. Since none of the data on the install CD is installed, it is completely safe. _________________ First things first, but not necessarily in that order.
Apologies if I take a while to respond. I'm currently working on the dematerialization circuit for my blue box. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Tue Dec 25, 2012 11:18 pm Post subject: |
|
|
Jerrino,
Welcome to Gentoo.
As your English is perfectly adequate for you to express your problems and much better than my Italian, lets continue to use English.
Please don't cross post until you have determined that you are unlikely to get a response to your first post. That normally, over 24 hours, as it takes a whole day for everyone to have the opportunity to see your post.
You are quick to point to your keyboard as the source of the problem. That may be true. Can you borrow another keyboard to test with?
I'm with The Doctor for installing with System Rescue CD. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Jerrino n00b
Joined: 25 Dec 2012 Posts: 21
|
Posted: Tue Dec 25, 2012 11:19 pm Post subject: |
|
|
Thank you The Doctor for this quick reply!!! I want install Gentoo as only OS on my pc (i am currently running Linuxmint). So, you're saying to burn a System Rescue CD on a USB stick, then prepare the PC, and with chroot install Gentoo on it, I am right? Well I will try this soon! But, the weird thing that I am seeing, is that until the keyboard mapping selection, the system recognizes Usb stick, and loads the basic system.. Why that?
NeddySeagoon wrote: | Jerrino,
Welcome to Gentoo.
As your English is perfectly adequate for you to express your problems and much better than my Italian, lets continue to use English.
Please don't cross post until you have determined that you are unlikely to get a response to your first post. That normally, over 24 hours, as it takes a whole day for everyone to have the opportunity to see your post.
You are quick to point to your keyboard as the source of the problem. That may be true. Can you borrow another keyboard to test with?
I'm with The Doctor for installing with System Rescue CD. |
No problem NeddySeagon, I will continue here in english (Google translator is one of my best friends, hehehehe), i just post here to increase the chances of a response.
Well, actually I don't have another keyboard to try, but tomorrow i will search for another one. Then I will write my "steps" (hope ahead!!!) Thanks _________________ Free your PC.. Free your Mind!!
ASUS Crosshair V formula - AMD FX-8150
16GB DDR3 - Nvidia GTX 550 Ti |
|
Back to top |
|
|
The Doctor Moderator
Joined: 27 Jul 2010 Posts: 2678
|
Posted: Tue Dec 25, 2012 11:28 pm Post subject: |
|
|
Chrooting is step 6 in the Gentoo Handbook so any disk you use needs to support it. There is not a big difference between different install media since you do most of it yourself. _________________ First things first, but not necessarily in that order.
Apologies if I take a while to respond. I'm currently working on the dematerialization circuit for my blue box. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Tue Dec 25, 2012 11:30 pm Post subject: |
|
|
Jerrino,
It may be USB power related. A USB root hub, which is usually a pair is stacked USB connectors is permitted to supply a total of 500mA for all connected devices.
A USB stick may want most of that. When the root hub is overloaded, it switches off power to one or more devices.
Try moving your keyboard to other USB connectors.
Yes. Download the System RescueCD *.ISO file and follow the instructions on the site to put it onto a USB stick. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Ant P. Watchman
Joined: 18 Apr 2009 Posts: 6920
|
Posted: Tue Dec 25, 2012 11:30 pm Post subject: |
|
|
Adding "usbcore.autosuspend=0" to the kernel command line might help. |
|
Back to top |
|
|
Jerrino n00b
Joined: 25 Dec 2012 Posts: 21
|
Posted: Tue Dec 25, 2012 11:37 pm Post subject: |
|
|
NeddySeagoon wrote: | Jerrino,
It may be USB power related. A USB root hub, which is usually a pair is stacked USB connectors is permitted to supply a total of 500mA for all connected devices.
A USB stick may want most of that. When the root hub is overloaded, it switches off power to one or more devices.
Try moving your keyboard to other USB connectors.
Yes. Download the System RescueCD *.ISO file and follow the instructions on the site to put it onto a USB stick. |
All devices are connected to the MB usb ports directly. A self-powered USB hub may help?
Ant p wrote: | Adding "usbcore.autosuspend=0" to the kernel command line might help. |
I will try this, thanks
Jerrino wrote: | i just post here to increase the chances of a response. |
...and I was right!!!! _________________ Free your PC.. Free your Mind!!
ASUS Crosshair V formula - AMD FX-8150
16GB DDR3 - Nvidia GTX 550 Ti |
|
Back to top |
|
|
Jerrino n00b
Joined: 25 Dec 2012 Posts: 21
|
Posted: Sun Dec 30, 2012 12:41 am Post subject: |
|
|
Ok guys, I am here again to update you on my progress. I was able to boot from System Rescue CD and install a minimal system on my PC. But I had many troubles to get my video card working. I am running with a nVidia GTX 550 Ti on a motherboard with AMD 990FX chipset. I've read in many post on this forum too, that problem (cannot open device /dev/nvidia0) can be solved disabling IOMMU, in kernel AND in BIOS. but, if i do that, Keyboard, mouse and ALL usb devices won't work. Maybe the liveDVD kernel does not have AMD IOMMU support? Don-t know, but, when i have installed system with a kernel "hand-made" compiled (with IOMMU) i get video card errors. I have try to build Nouveau driver (built in kernel), emerged nvidia-drivers, also installing the nvidia's website binary. Nothing, video does not work in X. Now i'm trying to build a genkernel, then i will post here again. Tips are welcome!!!
Thanks
EDIT: just another question... if i modify my /etc/portage/make.conf with some new cflags, the command
emerge --deep world
recompiles ALL software according to new specs?? _________________ Free your PC.. Free your Mind!!
ASUS Crosshair V formula - AMD FX-8150
16GB DDR3 - Nvidia GTX 550 Ti |
|
Back to top |
|
|
BillWho Veteran
Joined: 03 Mar 2012 Posts: 1600 Location: US
|
Posted: Sun Dec 30, 2012 1:25 am Post subject: |
|
|
Jerrino,
maybe following this guide will help http://en.gentoo-wiki.com/wiki/Nouveau
For make use flag changes emerge -uavDN @world _________________ Good luck
Since installing gentoo, my life has become one long emerge |
|
Back to top |
|
|
Jerrino n00b
Joined: 25 Dec 2012 Posts: 21
|
Posted: Sun Dec 30, 2012 1:30 am Post subject: |
|
|
Thanks Billwo,
but my Ubuntu's memories tells me that Nouveau drivers are not good enough for my target, that is to build a "supercomputer" according to my hardware's "power". I think that nvidia's binaries are the better way to do this.
Otherwise, there is still Ubuntu... _________________ Free your PC.. Free your Mind!!
ASUS Crosshair V formula - AMD FX-8150
16GB DDR3 - Nvidia GTX 550 Ti |
|
Back to top |
|
|
BillWho Veteran
Joined: 03 Mar 2012 Posts: 1600 Location: US
|
Posted: Sun Dec 30, 2012 1:44 am Post subject: |
|
|
Jerrino,
You can install the nvidia drivers, but you can't mix Nouveau and the proprietary blob. You mentioned Nouveau in your post so I thought you were pursuing that avenue to get the card working.
This site would be more appropriate then: http://en.gentoo-wiki.com/wiki/Nvidia _________________ Good luck
Since installing gentoo, my life has become one long emerge |
|
Back to top |
|
|
Jerrino n00b
Joined: 25 Dec 2012 Posts: 21
|
Posted: Sun Dec 30, 2012 8:51 am Post subject: |
|
|
Hello Billwho,
No, i have pursued ALSO that way, i tried to install several times with new options every time. But no luck. By the way, today i try to finish installation with genkernel. _________________ Free your PC.. Free your Mind!!
ASUS Crosshair V formula - AMD FX-8150
16GB DDR3 - Nvidia GTX 550 Ti |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Sun Dec 30, 2012 3:10 pm Post subject: |
|
|
Jerrino,
Neuveau and nvidia-drivers require incompatible kernel settings. You must choose one.
When your Gentoo is working, there is a way to have both drivers but you have to choose at boot time. Anyway, for now, make your Gentoo work. Make it better/shinier/faster later. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
|