Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Failed to emerge x11-misc/colord-0.1.21, emerge --info
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
loongsking
n00b
n00b


Joined: 24 Sep 2012
Posts: 4

PostPosted: Sat Dec 08, 2012 11:39 am    Post subject: Failed to emerge x11-misc/colord-0.1.21, emerge --info Reply with quote

HI,I'm installing gnome3,The one I can not solve the problem
[/code]
Code:
 colord-0.1.21.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                           [ ok ]
 * Adding group 'colord' to your system ...
 *  - Groupid: next available
/usr/portage/eclass/user.eclass: line 343: groupadd: command not found
 * ERROR: x11-misc/colord-0.1.21 failed (setup phase):
 *   (no error message)
 *
 * Call stack:
 *              ebuild.sh, line  93:  Called pkg_setup
 *   colord-0.1.21.ebuild, line  51:  Called enewgroup 'colord'
 *            user.eclass, line 343:  Called die
 * The specific snippet of code:
 *              groupadd -r ${opts} "${egroup}" || die
 *
 * If you need support, post the output of `emerge --info '=x11-misc/colord-0.1.21'`,
 * the complete build log and the output of `emerge -pqv '=x11-misc/colord-0.1.21'`.
 * The complete build log is located at '/var/tmp/portage/x11-misc/colord-0.1.21/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/x11-misc/colord-0.1.21/temp/die.env'.
 * Working directory: '/var/tmp/portage/x11-misc/colord-0.1.21'
 * S: '/var/tmp/portage/x11-misc/colord-0.1.21/work/colord-0.1.21'

>>> Failed to emerge x11-misc/colord-0.1.21, Log file:

>>>  '/var/tmp/portage/x11-misc/colord-0.1.21/temp/build.log'

 * Messages for package x11-misc/colord-0.1.21:

 * ERROR: x11-misc/colord-0.1.21 failed (setup phase):
 *   (no error message)
 *
 * Call stack:
 *              ebuild.sh, line  93:  Called pkg_setup
 *   colord-0.1.21.ebuild, line  51:  Called enewgroup 'colord'
 *            user.eclass, line 343:  Called die
 * The specific snippet of code:
 *              groupadd -r ${opts} "${egroup}" || die
 *
 * If you need support, post the output of `emerge --info '=x11-misc/colord-0.1.21'`,
 * the complete build log and the output of `emerge -pqv '=x11-misc/colord-0.1.21'`.
 * The complete build log is located at '/var/tmp/portage/x11-misc/colord-0.1.21/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/x11-misc/colord-0.1.21/temp/die.env'.
 * Working directory: '/var/tmp/portage/x11-misc/colord-0.1.21'
 * S: '/var/tmp/portage/x11-misc/colord-0.1.21/work/colord-0.1.21'



Code:
emerge --info '=x11-misc/colord-0.1.21'
Portage 2.1.11.31 (default/linux/amd64/10.0/desktop/kde, gcc-4.5.4, glibc-2.15-r3, 3.5.7-gentoo x86_64)
=================================================================
                         System Settings
=================================================================
System uname: Linux-3.5.7-gentoo-x86_64-Intel-R-_Core-TM-_i5-2430M_CPU_@_2.40GHz-with-gentoo-2.1
Timestamp of tree: Sat, 08 Dec 2012 07:45:01 +0000
ld GNU ld (GNU Binutils) 2.22
app-shells/bash:          4.2_p37
dev-lang/python:          2.7.3-r2, 3.2.3
dev-util/cmake:           2.8.9
dev-util/pkgconfig:       0.27.1
sys-apps/baselayout:      2.1-r1
sys-apps/openrc:          0.9.8.4
sys-apps/sandbox:         2.5
sys-devel/autoconf:       2.13, 2.68
sys-devel/automake:       1.9.6-r3, 1.11.6
sys-devel/binutils:       2.22-r1
sys-devel/gcc:            4.5.4
sys-devel/gcc-config:     1.7.3
sys-devel/libtool:        2.4-r1
sys-devel/make:           3.82-r3
sys-kernel/linux-headers: 3.4-r2 (virtual/os-headers)
sys-libs/glibc:           2.15-r3
Repositories: gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=core2 -mtune=generic -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=core2 -mtune=generic -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://mirrors.163.com/gentoo/"
LANG="en_US"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://mirrors.163.com/gentoo-portage/"
USE="X a52 aac acl acpi additions alsa amd64 berkdb bluetooth branding bzip2 cairo cdda cdr cli consolekit cracklib crypt cups cxx dbus declarative dri dts dvd dvdr emboss encode exif fam firefox flac fortran gdbm gif gnome gpm gtk gtk3 iconv ipv6 jpeg kde kipi lcms ldap libnotify mad mmx mng modules mp3 mp4 mpeg mudflap multilib ncurses networkmanager nls nptl ogg opengl openmp pam pango pcre pdf phonon plasma png policykit ppds pppd pulseaudio qt3support qt4 readline sdk sdl semantic-desktop session spell sse sse2 ssl startup-notification svg tcpd tiff truetype udev udisks unicode upower usb vorbis wxwidgets x264 xcb xcomposite xinerama xml xscreensaver xv xvid zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="zh_CN" PHP_TARGETS="php5-3" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_2" RUBY_TARGETS="ruby18 ruby19" USERLAND="GNU" VIDEO_CARDS="fglrx" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 9053

PostPosted: Sat Dec 08, 2012 5:35 pm    Post subject: Reply with quote

What is the output of emerge --pretend --verbose sys-apps/shadow?
Back to top
View user's profile Send private message
drwook
Veteran
Veteran


Joined: 30 Mar 2005
Posts: 1322
Location: London

PostPosted: Sat Dec 08, 2012 5:43 pm    Post subject: Reply with quote

As Hu suggests, shadow should install the groupadd binary... Try re-emerging shadow and check if /usr/sbin/groupadd exists.

If it does, maybe your PATH is screwy...
Back to top
View user's profile Send private message
loongsking
n00b
n00b


Joined: 24 Sep 2012
Posts: 4

PostPosted: Sun Dec 09, 2012 2:57 am    Post subject: Reply with quote

Hu wrote:
What is the output of emerge --pretend --verbose sys-apps/shadow?

Code:
$ sudo emerge --pretend --verbose sys-apps/shadow
密码:

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N     ] sys-apps/shadow-4.1.4.3  USE="cracklib nls pam -audit (-selinux) -skey" 1,762 kB
[blocks B      ] <sys-apps/shadow-4.1.5-r1 ("<sys-apps/shadow-4.1.5-r1" is blocking sys-auth/pambase-20120417-r1)

Total: 1 package (1 new), Size of downloads: 1,762 kB
Conflict: 1 block (1 unsatisfied)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (sys-apps/shadow-4.1.4.3::gentoo, ebuild scheduled for merge) pulled in by
    sys-apps/shadow


For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked


 * IMPORTANT: 8 news items need reading for repository 'gentoo'.
 * Use eselect news to read news items.



[/code]
drwook wrote:
As Hu suggests, shadow should install the groupadd binary... Try re-emerging shadow and check if /usr/sbin/groupadd exists.

If it does, maybe your PATH is screwy...


No directory / usr / sbin / find / groupadd
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 9053

PostPosted: Sun Dec 09, 2012 6:01 am    Post subject: Reply with quote

Somehow, you uninstalled shadow. That is bad. As drwook said, you need to reinstall it.
Back to top
View user's profile Send private message
loongsking
n00b
n00b


Joined: 24 Sep 2012
Posts: 4

PostPosted: Sun Dec 09, 2012 9:50 am    Post subject: Reply with quote

Hu wrote:
Somehow, you uninstalled shadow. That is bad. As drwook said, you need to reinstall it.


I'm sorry, asked an old problem,I've --unmerge sys-apps/shadow-4.1.4.3 sys-auth/pambase-20120417,
But,Blocking this <sys-apps/shadow-4.1.5-r1
[/code]
Code:
[blocks B      ] <sys-apps/shadow-4.1.5-r1 ("<sys-apps/shadow-4.1.5-r1" is blocking sys-auth/pambase-20120417-r1)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (sys-apps/shadow-4.1.4.3::gentoo, ebuild scheduled for merge) pulled in by
    >=sys-apps/shadow-4.1 required by (virtual/shadow-0::gentoo, installed)
Back to top
View user's profile Send private message
ch64
Tux's lil' helper
Tux's lil' helper


Joined: 09 Jun 2010
Posts: 140

PostPosted: Sun Jan 12, 2014 8:58 pm    Post subject: Reply with quote

For me some shadow tools are gone because i had a harddisk defect. I changed it. But after that these tools were gone.
When i try to reinstall shadow it pulls more pakets than the one from the topic starter.
For polkit eg. it needs a tool from shadow: groupadd.
What can i do?
I would like to copy it from the stage archive. Or some build. ;p

Code:

Gentoo-11 / # emerge --pretend --verbose sys-apps/shadow

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N     ] sys-auth/polkit-0.112-r1  USE="gtk introspection kde nls pam -examples (-selinux) -systemd" 0 kB
[ebuild  N     ] gnome-extra/polkit-gnome-0.105  0 kB
[ebuild  N     ] sys-auth/consolekit-0.4.6  USE="acl pam policykit -debug -doc (-selinux) -systemd-units {-test}" 0 kB
[ebuild  N     ] sys-auth/polkit-qt-0.103.0  USE="-debug -examples" 0 kB
[ebuild     U  ] sys-auth/pambase-20120417-r3 [20100310] USE="consolekit cracklib sha512 -debug -gnome-keyring -minimal% -mktemp -pam_krb5% -pam_ssh% -passwdqc (-selinux) -systemd% (-ssh%)" 0 kB
[ebuild  N     ] sys-power/upower-0.9.23  USE="introspection -doc -ios -systemd" 0 kB
[ebuild  N     ] sys-fs/udisks-2.1.1:2  USE="gptfdisk introspection -cryptsetup -debug (-selinux) -systemd" 0 kB
[ebuild  N     ] sys-apps/shadow-4.1.5.1-r1  USE="acl cracklib nls pam -audit (-selinux) -skey -xattr" 0 kB
[ebuild  N     ] kde-base/kdelibs-4.12.0:4  USE="acl alsa bzip2 fam handbook mmx nls opengl policykit spell sse sse2 ssl udev udisks upower -3dnow (-altivec) (-aqua) -debug -doc -jpeg2k -kerberos -lzma -openexr -semantic-desktop {-test} -zeroconf" 0 kB                                                                                                           
[ebuild  N     ] kde-base/katepart-4.12.0:4  USE="handbook (-aqua) -debug" 0 kB
[ebuild     U  ] kde-base/kde-l10n-4.12.0:4 [4.2.4-r1:4] USE="handbook (-aqua) (-kdeprefix%)" LINGUAS="de -ar -bg -bs% -ca -ca@valencia% -cs -da -el -en_GB -es -et -eu -fi -fr -ga -gl -he -hi -hr% -hu -ia% -is -it -ja -kk -km -ko -lt -lv -mr -nb -nds -nl -nn -pa -pl -pt -pt_BR -ro -ru -sk -sl -sr -sv -tr -ug% -uk -vi% -wa -zh_CN -zh_TW (-bn_IN%) (-csb%) (-gu%) (-kn%) (-ku%) (-mai%) (-mk%) (-ml%) (-tg%) (-th%)" 0 kB
[ebuild  N     ] sys-auth/polkit-kde-agent-0.99.0-r1:4  USE="(-aqua) -debug" LINGUAS="de -ca -ca@valencia -cs -da -en_GB -eo -es -et -fi -fr -ga -gl -hr -hu -is -it -ja -km -lt -mai -ms -nb -nds -nl -pa -pt -pt_BR -ro -ru -sk -sr -sr@ijekavian -sr@ijekavianlatin -sr@latin -sv -th -tr -uk -zh_TW" 0 kB                                                           
[ebuild  N     ] kde-base/kdesu-4.12.0:4  USE="handbook (-aqua) -debug" 0 kB
[ebuild  NS    ] kde-base/khelpcenter-4.12.0:4 [3.5.10:3.5] USE="(-aqua) -debug" 0 kB



Code:

>>> Emerging (1 of 14) sys-auth/polkit-0.112-r1
 * polkit-0.112.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                                                                                  [ ok ]
 * Adding group 'polkitd' to your system ...
 *  - Groupid: next available
/usr/portage/eclass/user.eclass: line 343: groupadd: command not found
 * ERROR: sys-auth/polkit-0.112-r1::gentoo failed (setup phase):
 *   (no error message)
 *
 * Call stack:
 *                ebuild.sh, line  93:  Called pkg_setup
 *   polkit-0.112-r1.ebuild, line  52:  Called enewgroup 'polkitd'
 *              user.eclass, line 343:  Called die
 * The specific snippet of code:
 *              groupadd -r ${opts} "${egroup}" || die
 *
 * If you need support, post the output of `emerge --info '=sys-auth/polkit-0.112-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-auth/polkit-0.112-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-auth/polkit-0.112-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-auth/polkit-0.112-r1/temp/die.env'.
 * Working directory: '/usr/lib/portage/pym'
 * S: '/var/tmp/portage/sys-auth/polkit-0.112-r1/work/polkit-0.112'

>>> Failed to emerge sys-auth/polkit-0.112-r1, Log file:

>>>  '/var/tmp/portage/sys-auth/polkit-0.112-r1/temp/build.log'

 * Messages for package sys-auth/polkit-0.112-r1:

 * ERROR: sys-auth/polkit-0.112-r1::gentoo failed (setup phase):
 *   (no error message)
 *
 * Call stack:
 *                ebuild.sh, line  93:  Called pkg_setup
 *   polkit-0.112-r1.ebuild, line  52:  Called enewgroup 'polkitd'
 *              user.eclass, line 343:  Called die
 * The specific snippet of code:
 *              groupadd -r ${opts} "${egroup}" || die
 *
 * If you need support, post the output of `emerge --info '=sys-auth/polkit-0.112-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-auth/polkit-0.112-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-auth/polkit-0.112-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-auth/polkit-0.112-r1/temp/die.env'.
 * Working directory: '/usr/lib/portage/pym'
 * S: '/var/tmp/portage/sys-auth/polkit-0.112-r1/work/polkit-0.112'
Back to top
View user's profile Send private message
ch64
Tux's lil' helper
Tux's lil' helper


Joined: 09 Jun 2010
Posts: 140

PostPosted: Sun Jan 12, 2014 9:06 pm    Post subject: Reply with quote

I installed shadow manually from the source.
Now it comes:
Code:

>>> Emerging (1 of 14) sys-auth/polkit-0.112-r1
 * polkit-0.112.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                                                                                  [ ok ]
 * Adding group 'polkitd' to your system ...
 *  - Groupid: next available
groupadd: PAM: Authentication failure
 * ERROR: sys-auth/polkit-0.112-r1::gentoo failed (setup phase):
 *   (no error message)
 *
 * Call stack:
 *                ebuild.sh, line  93:  Called pkg_setup
 *   polkit-0.112-r1.ebuild, line  52:  Called enewgroup 'polkitd'
 *              user.eclass, line 343:  Called die
 * The specific snippet of code:
 *              groupadd -r ${opts} "${egroup}" || die
 *
 * If you need support, post the output of `emerge --info '=sys-auth/polkit-0.112-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-auth/polkit-0.112-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-auth/polkit-0.112-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-auth/polkit-0.112-r1/temp/die.env'.
 * Working directory: '/usr/lib/portage/pym'
 * S: '/var/tmp/portage/sys-auth/polkit-0.112-r1/work/polkit-0.112'

>>> Failed to emerge sys-auth/polkit-0.112-r1, Log file:
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 9053

PostPosted: Sun Jan 12, 2014 10:06 pm    Post subject: Reply with quote

ch64 wrote:

What can i do?
I would like to copy it from the stage archive. Or some build. ;p
Unpack a system backup, chroot into it, and use quickpkg to create a tbz2 of the package(s) you need. Then use emerge --usepkgonly on the live system to install the tbz2.
Back to top
View user's profile Send private message
ch64
Tux's lil' helper
Tux's lil' helper


Joined: 09 Jun 2010
Posts: 140

PostPosted: Mon Jan 13, 2014 1:17 am    Post subject: Reply with quote

well, i do not have a proper image from my laptop. it has x86.
my pc is amd64. so doesn't work. next one is

my netbook. it is x86. should work? :-)
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 9053

PostPosted: Tue Jan 14, 2014 2:38 am    Post subject: Reply with quote

It might, depending on the CFLAGS used.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum