View previous topic :: View next topic |
Author |
Message |
Yminus Apprentice
Joined: 06 Jan 2008 Posts: 184
|
Posted: Thu Dec 06, 2012 12:10 pm Post subject: xrandr --addmode VGA-0 ...: X Error of failed request |
|
|
Can anyone tell me what's going wrong here?
Initial putput of xrandr:
Code: | xrandr
Screen 0: minimum 8 x 8, current 1280 x 800, maximum 8192 x 8192
VGA-0 connected (normal left inverted right x axis y axis)
1024x768 60.0 +
800x600 72.2 60.3 56.2
640x480 59.9
512x384 120.0
400x300 144.4
320x240 120.1
TV-0 disconnected (normal left inverted right x axis y axis)
LVDS-0 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 59.9*+ 59.9 |
Formatting a new modeline
Code: | cvt 1280 1024 60
# 1280x1024 59.89 Hz (CVT 1.31M4) hsync: 63.67 kHz; pclk: 109.00 MHz
Modeline "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync |
Creating a new mode:
Code: | xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync |
Output of xrandr after creation:
Code: | xrandr
Screen 0: minimum 8 x 8, current 1280 x 800, maximum 8192 x 8192
VGA-0 connected (normal left inverted right x axis y axis)
1024x768 60.0 +
800x600 72.2 60.3 56.2
640x480 59.9
512x384 120.0
400x300 144.4
320x240 120.1
TV-0 disconnected (normal left inverted right x axis y axis)
LVDS-0 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 59.9*+ 59.9
1280x1024_60.00 (0x27e) 109.0MHz
h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz
v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz |
Trying to add new mode to VGA-0 fails:
Code: | xrandr --addmode VGA-0 "1280x1024_60.00"
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 139 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 27
Current serial number in output stream: 28 |
|
|
Back to top |
|
|
BillWho Veteran
Joined: 03 Mar 2012 Posts: 1600 Location: US
|
Posted: Fri Dec 07, 2012 12:54 am Post subject: |
|
|
Yminus,
Yminus wrote: | xrandr --addmode VGA-0 "1280x1024_60.00" |
Try this line without the quotes _________________ Good luck
Since installing gentoo, my life has become one long emerge |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|