Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Kdm /kwin and direct rendering [not really solved]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Wed Oct 31, 2012 5:52 am    Post subject: Kdm /kwin and direct rendering [not really solved] Reply with quote

Last weekend after an update (~x86) my KDE desktop stopped working properly. KDM shows up for a few seconds and then crashes, falling back to console. Using startx to fire up the desktop works. The desktop looks functional but there is no proper rendering. It's not possible to change settings, have a usable file manager etc..

The output of glxinfo and glxgears looks ok as well as the output of Xorg.0.log. Only the kdm.log shows an "AIGLX ERROR" not finding the correct drivers which are definetely there.

I've compiled mesa with the use flags for i915 and i945 just to play it safe and tried "classic" and "gallium" settings without success and I've already set rc-update add udev-mount sysinit because of the udev update which caused some trouble for some users.

Hope someone has an idea and can help.


Last edited by Tolstoi on Fri Nov 02, 2012 5:48 am; edited 1 time in total
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Thu Nov 01, 2012 5:33 am    Post subject: Reply with quote

As I realized today i965_dri.so is really missing in /usr/lib/dri. I stumbled over this after checking my Xorg.0.log again and my /usr/lib/dri.
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Thu Nov 01, 2012 5:20 pm    Post subject: Reply with quote

Removed the stale i965_dri.so file in /usr/lib/dri ran "make clean" and compiled the kernel again. No error messages in Xorg.0.log but the kdm.log reports a Dbus connection error.

Enabled AUDITSYSCALL in the kernel which was mysteriously disabled.

Trying an "emerge -av1 $(qlist -IC dbus gobject-introspection)" now.
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Fri Nov 02, 2012 5:48 am    Post subject: Reply with quote

All the solutions I found on the internet or here in this forum didn't solve the problem. After 5 days of fiddling around I decided to start a new installation.

I seem to have experienced an accumulation of errors / and or mistakes which happened all at the same time, like an update world, then maybe a misconfiguration of the kernel, and then the dbus error reported from KDM.

The graphics issue with the missing i965_dri.so was solved by cleaning up and compiling the kernel again. After that the Xorg.0.log and everything else related to it was working again.

The dbus error messages reporting that the connection to dbus was lost seem to be related to different parts of KDE as I read while searching for a solution. In my case KDM was affected.
Back to top
View user's profile Send private message
gerard82
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2225
Location: Netherlands

PostPosted: Fri Nov 02, 2012 10:50 am    Post subject: Reply with quote

Running ~arch is asking for problems IMHO.
Better use /etc/portage/package.keywords to unmask individual packages.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Fri Nov 02, 2012 3:03 pm    Post subject: Reply with quote

Probably you're right. But I must say that for the most of the time, except at the beginng of my Gentoo exprerience I always used ~arch and everything went quite well.

But anyhow - just switched to x86_64 for the first time of my life and disabled the ~arch flag. System is happily compiling away, the coffee is hot, the weather outside is grey.... :)
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Sat Nov 03, 2012 10:31 am    Post subject: Reply with quote

Well, this is frustrating. A new install - the same problem. I feel really stupid now :).

Here is my Xorg.0.log

Code:


[     9.275]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[     9.275] X Protocol Version 11, Revision 0
[     9.275] Build Operating System: Linux 3.2.32-std310-amd64 x86_64 Gentoo
[     9.275] Current Operating System: Linux localhost 3.5.7-gentoo #9 Sat Nov 3 10:04:06 CET 2012 x86_64
[     9.275] Kernel command line: root=/dev/sda3 rootfstype=ext4 quiet CONSOLE=tty1
[     9.275] Build Date: 02 November 2012  08:08:04PM
[     9.275] 
[     9.275] Current version of pixman: 0.26.0
[     9.275]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[     9.275] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.275] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 10:11:45 2012
[     9.279] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.280] (==) No Layout section.  Using the first Screen section.
[     9.280] (==) No screen section available. Using defaults.
[     9.280] (**) |-->Screen "Default Screen Section" (0)
[     9.280] (**) |   |-->Monitor "<default monitor>"
[     9.280] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[     9.280] (==) Automatically adding devices
[     9.280] (==) Automatically enabling devices
[     9.283] (==) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/TTF/,
   /usr/share/fonts/OTF/,
   /usr/share/fonts/Type1/,
   /usr/share/fonts/100dpi/,
   /usr/share/fonts/75dpi/
[     9.283] (==) ModulePath set to "/usr/lib64/xorg/modules"
[     9.283] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.283] (II) Loader magic: 0x7d6ae0
[     9.283] (II) Module ABI versions:
[     9.283]    X.Org ANSI C Emulation: 0.4
[     9.283]    X.Org Video Driver: 12.0
[     9.283]    X.Org XInput driver : 16.0
[     9.283]    X.Org Server Extension : 6.0
[     9.284] (--) PCI:*(0:0:2:0) 8086:0116:1025:0504 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[     9.284] (--) PCI: (0:1:0:0) 10de:0df4:1025:0505 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[     9.284] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     9.284] (II) LoadModule: "extmod"
[     9.285] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[     9.287] (II) Module extmod: vendor="X.Org Foundation"
[     9.287]    compiled for 1.12.2, module version = 1.0.0
[     9.287]    Module class: X.Org Server Extension
[     9.287]    ABI class: X.Org Server Extension, version 6.0
[     9.287] (II) Loading extension MIT-SCREEN-SAVER
[     9.287] (II) Loading extension XFree86-VidModeExtension
[     9.287] (II) Loading extension XFree86-DGA
[     9.287] (II) Loading extension DPMS
[     9.287] (II) Loading extension XVideo
[     9.287] (II) Loading extension XVideo-MotionCompensation
[     9.287] (II) Loading extension X-Resource
[     9.287] (II) LoadModule: "dbe"
[     9.288] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[     9.288] (II) Module dbe: vendor="X.Org Foundation"
[     9.288]    compiled for 1.12.2, module version = 1.0.0
[     9.288]    Module class: X.Org Server Extension
[     9.288]    ABI class: X.Org Server Extension, version 6.0
[     9.288] (II) Loading extension DOUBLE-BUFFER
[     9.288] (II) LoadModule: "glx"
[     9.288] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[     9.292] (II) Module glx: vendor="X.Org Foundation"
[     9.292]    compiled for 1.12.2, module version = 1.0.0
[     9.292]    ABI class: X.Org Server Extension, version 6.0
[     9.292] (==) AIGLX enabled
[     9.293] (II) Loading extension GLX
[     9.293] (II) LoadModule: "record"
[     9.293] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[     9.294] (II) Module record: vendor="X.Org Foundation"
[     9.294]    compiled for 1.12.2, module version = 1.13.0
[     9.294]    Module class: X.Org Server Extension
[     9.294]    ABI class: X.Org Server Extension, version 6.0
[     9.294] (II) Loading extension RECORD
[     9.294] (II) LoadModule: "dri"
[     9.294] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[     9.296] (II) Module dri: vendor="X.Org Foundation"
[     9.296]    compiled for 1.12.2, module version = 1.0.0
[     9.296]    ABI class: X.Org Server Extension, version 6.0
[     9.296] (II) Loading extension XFree86-DRI
[     9.296] (II) LoadModule: "dri2"
[     9.296] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[     9.297] (II) Module dri2: vendor="X.Org Foundation"
[     9.297]    compiled for 1.12.2, module version = 1.2.0
[     9.297]    ABI class: X.Org Server Extension, version 6.0
[     9.297] (II) Loading extension DRI2
[     9.297] (==) Matched intel as autoconfigured driver 0
[     9.297] (==) Matched vesa as autoconfigured driver 1
[     9.297] (==) Matched fbdev as autoconfigured driver 2
[     9.297] (==) Assigned the driver to the xf86ConfigLayout
[     9.297] (II) LoadModule: "intel"
[     9.307] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[     9.312] (II) Module intel: vendor="X.Org Foundation"
[     9.312]    compiled for 1.12.2, module version = 2.19.0
[     9.312]    Module class: X.Org Video Driver
[     9.312]    ABI class: X.Org Video Driver, version 12.0
[     9.312] (II) LoadModule: "vesa"
[     9.320] (WW) Warning, couldn't open module vesa
[     9.320] (II) UnloadModule: "vesa"
[     9.320] (II) Unloading vesa
[     9.320] (EE) Failed to load module "vesa" (module does not exist, 0)
[     9.320] (II) LoadModule: "fbdev"
[     9.320] (WW) Warning, couldn't open module fbdev
[     9.320] (II) UnloadModule: "fbdev"
[     9.320] (II) Unloading fbdev
[     9.320] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     9.320] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
   Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
   Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
   Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
   Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
   Ivybridge Server (GT2)
[     9.321] (++) using VT number 7

[     9.325] drmOpenDevice: node name is /dev/dri/card0
[     9.325] drmOpenDevice: open result is 8, (OK)
[     9.325] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[     9.325] drmOpenDevice: node name is /dev/dri/card0
[     9.325] drmOpenDevice: open result is 8, (OK)
[     9.325] drmOpenByBusid: drmOpenMinor returns 8
[     9.325] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[     9.325] (II) intel(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[     9.325] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     9.325] (==) intel(0): RGB weight 888
[     9.325] (==) intel(0): Default visual is TrueColor
[     9.325] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[     9.325] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[     9.325] (**) intel(0): Relaxed fencing enabled
[     9.325] (**) intel(0): Wait on SwapBuffers? enabled
[     9.325] (**) intel(0): Triple buffering? enabled
[     9.325] (**) intel(0): Framebuffer tiled
[     9.325] (**) intel(0): Pixmaps tiled
[     9.325] (**) intel(0): 3D buffers tiled
[     9.325] (**) intel(0): SwapBuffers wait enabled
[     9.325] (==) intel(0): video overlay key set to 0x101fe
[     9.325] (II) intel(0): Output LVDS1 has no monitor section
[     9.426] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[     9.426] (II) intel(0): Output VGA1 has no monitor section
[     9.426] (II) intel(0): Output HDMI1 has no monitor section
[     9.451] (II) intel(0): Output DP1 has no monitor section
[     9.451] (II) intel(0): EDID for output LVDS1
[     9.451] (II) intel(0): Manufacturer: AUO  Model: 26ec  Serial#: 0
[     9.451] (II) intel(0): Year: 2009  Week: 1
[     9.451] (II) intel(0): EDID Version: 1.3
[     9.451] (II) intel(0): Digital Display Input
[     9.451] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     9.451] (II) intel(0): Gamma: 2.20
[     9.451] (II) intel(0): No DPMS capabilities specified
[     9.451] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     9.451] (II) intel(0): First detailed timing is preferred mode
[     9.451] (II) intel(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[     9.451] (II) intel(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[     9.451] (II) intel(0): Manufacturer's mask: 0
[     9.451] (II) intel(0): Supported detailed timing:
[     9.451] (II) intel(0): clock: 71.8 MHz   Image Size:  344 x 193 mm
[     9.451] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[     9.451] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 784 v_border: 0
[     9.451] (II) intel(0): Unknown vendor-specific block f
[     9.451] (II) intel(0):  AUO
[     9.451] (II) intel(0):  B156XW02 V6
[     9.451] (II) intel(0): EDID (in hex):
[     9.451] (II) intel(0):    00ffffffffffff0006afec2600000000
[     9.451] (II) intel(0):    01130103802213780ad7759355558d29
[     9.451] (II) intel(0):    24505400000001010101010101010101
[     9.451] (II) intel(0):    0101010101010c1c56a0500010303020
[     9.451] (II) intel(0):    360058c1100000180000000f00000000
[     9.451] (II) intel(0):    00000000000000000020000000fe0041
[     9.451] (II) intel(0):    554f0a202020202020202020000000fe
[     9.451] (II) intel(0):    004231353658573032205636200a0065
[     9.451] (II) intel(0): EDID vendor "AUO", prod id 9964
[     9.451] (II) intel(0): Printing DDC gathered Modelines:
[     9.451] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[     9.452] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[     9.452] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[     9.452] (II) intel(0): Printing probed modes for output LVDS1
[     9.452] (II) intel(0): Modeline "1366x768"x60.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[     9.452] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     9.452] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     9.452] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     9.452] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     9.452] (II) intel(0): EDID for output VGA1
[     9.453] (II) intel(0): EDID for output HDMI1
[     9.477] (II) intel(0): EDID for output DP1
[     9.477] (II) intel(0): Output LVDS1 connected
[     9.477] (II) intel(0): Output VGA1 disconnected
[     9.477] (II) intel(0): Output HDMI1 disconnected
[     9.477] (II) intel(0): Output DP1 disconnected
[     9.477] (II) intel(0): Using exact sizes for initial modes
[     9.477] (II) intel(0): Output LVDS1 using initial mode 1366x768
[     9.477] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     9.477] (II) intel(0): Kernel page flipping support detected, enabling
[     9.477] (**) intel(0): Display dimensions: (340, 190) mm
[     9.477] (**) intel(0): DPI set to (102, 102)
[     9.477] (II) Loading sub module "fb"
[     9.477] (II) LoadModule: "fb"
[     9.477] (II) Loading /usr/lib64/xorg/modules/libfb.so
[     9.479] (II) Module fb: vendor="X.Org Foundation"
[     9.479]    compiled for 1.12.2, module version = 1.0.0
[     9.479]    ABI class: X.Org ANSI C Emulation, version 0.4
[     9.479] (II) Loading sub module "dri2"
[     9.479] (II) LoadModule: "dri2"
[     9.479] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[     9.479] (II) Module dri2: vendor="X.Org Foundation"
[     9.479]    compiled for 1.12.2, module version = 1.2.0
[     9.479]    ABI class: X.Org Server Extension, version 6.0
[     9.479] (==) Depth 24 pixmap format is 32 bpp
[     9.479] (II) intel(0): [DRI2] Setup complete
[     9.479] (II) intel(0): [DRI2]   DRI driver: i965
[     9.479] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[     9.482] (II) UXA(0): Driver registered support for the following operations:
[     9.482] (II)         solid
[     9.482] (II)         copy
[     9.482] (II)         composite (RENDER acceleration)
[     9.482] (II)         put_image
[     9.482] (II)         get_image
[     9.482] (==) intel(0): Backing store disabled
[     9.482] (==) intel(0): Silken mouse enabled
[     9.482] (II) intel(0): Initializing HW Cursor
[     9.482] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     9.483] (==) intel(0): DPMS enabled
[     9.483] (==) intel(0): Intel XvMC decoder enabled
[     9.483] (II) intel(0): Set up textured video
[     9.483] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[     9.483] (II) intel(0): direct rendering: DRI2 Enabled
[     9.483] (==) intel(0): hotplug detection: "enabled"
[     9.504] (--) RandR disabled
[     9.504] (II) Initializing built-in extension Generic Event Extension
[     9.504] (II) Initializing built-in extension SHAPE
[     9.504] (II) Initializing built-in extension MIT-SHM
[     9.504] (II) Initializing built-in extension XInputExtension
[     9.504] (II) Initializing built-in extension XTEST
[     9.504] (II) Initializing built-in extension BIG-REQUESTS
[     9.504] (II) Initializing built-in extension SYNC
[     9.504] (II) Initializing built-in extension XKEYBOARD
[     9.504] (II) Initializing built-in extension XC-MISC
[     9.504] (II) Initializing built-in extension XINERAMA
[     9.504] (II) Initializing built-in extension XFIXES
[     9.504] (II) Initializing built-in extension RENDER
[     9.504] (II) Initializing built-in extension RANDR
[     9.504] (II) Initializing built-in extension COMPOSITE
[     9.504] (II) Initializing built-in extension DAMAGE
[     9.533] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     9.533] (II) AIGLX: enabled GLX_INTEL_swap_event
[     9.533] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     9.533] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     9.533] (II) AIGLX: Loaded and initialized i965
[     9.533] (II) GLX: Initialized DRI2 GL provider for screen 0
[     9.533] (II) intel(0): Setting screen physical size to 361 x 203
[     9.648] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     9.648] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.648] (II) LoadModule: "evdev"
[     9.649] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[     9.654] (II) Module evdev: vendor="X.Org Foundation"
[     9.654]    compiled for 1.12.2, module version = 2.7.0
[     9.654]    Module class: X.Org XInput Driver
[     9.654]    ABI class: X.Org XInput driver, version 16.0
[     9.654] (II) Using input driver 'evdev' for 'Power Button'
[     9.654] (**) Power Button: always reports core events
[     9.654] (**) evdev: Power Button: Device: "/dev/input/event3"
[     9.654] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.654] (--) evdev: Power Button: Found keys
[     9.654] (II) evdev: Power Button: Configuring as keyboard
[     9.654] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     9.655] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.655] (**) Option "xkb_rules" "evdev"
[     9.655] (**) Option "xkb_model" "evdev"
[     9.655] (**) Option "xkb_layout" "us"
[     9.674] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     9.674] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.674] (II) Using input driver 'evdev' for 'Video Bus'
[     9.674] (**) Video Bus: always reports core events
[     9.674] (**) evdev: Video Bus: Device: "/dev/input/event4"
[     9.674] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     9.674] (--) evdev: Video Bus: Found keys
[     9.674] (II) evdev: Video Bus: Configuring as keyboard
[     9.674] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[     9.674] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     9.674] (**) Option "xkb_rules" "evdev"
[     9.674] (**) Option "xkb_model" "evdev"
[     9.674] (**) Option "xkb_layout" "us"
[     9.675] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     9.675] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.675] (II) Using input driver 'evdev' for 'Power Button'
[     9.675] (**) Power Button: always reports core events
[     9.675] (**) evdev: Power Button: Device: "/dev/input/event0"
[     9.675] (--) evdev: Power Button: Vendor 0 Product 0x1
[     9.675] (--) evdev: Power Button: Found keys
[     9.675] (II) evdev: Power Button: Configuring as keyboard
[     9.675] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0/event0"
[     9.675] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     9.675] (**) Option "xkb_rules" "evdev"
[     9.675] (**) Option "xkb_model" "evdev"
[     9.675] (**) Option "xkb_layout" "us"
[     9.675] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     9.675] (II) No input driver specified, ignoring this device.
[     9.675] (II) This device may have been added with another device file.
[     9.675] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     9.675] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     9.675] (II) Using input driver 'evdev' for 'Sleep Button'
[     9.675] (**) Sleep Button: always reports core events
[     9.675] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[     9.676] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     9.676] (--) evdev: Sleep Button: Found keys
[     9.676] (II) evdev: Sleep Button: Configuring as keyboard
[     9.676] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2/event2"
[     9.676] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     9.676] (**) Option "xkb_rules" "evdev"
[     9.676] (**) Option "xkb_model" "evdev"
[     9.676] (**) Option "xkb_layout" "us"
[     9.676] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event6)
[     9.676] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[     9.676] (II) Using input driver 'evdev' for '1.3M WebCam'
[     9.676] (**) 1.3M WebCam: always reports core events
[     9.676] (**) evdev: 1.3M WebCam: Device: "/dev/input/event6"
[     9.676] (--) evdev: 1.3M WebCam: Vendor 0x4fc Product 0x2800
[     9.676] (--) evdev: 1.3M WebCam: Found keys
[     9.676] (II) evdev: 1.3M WebCam: Configuring as keyboard
[     9.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6/event6"
[     9.676] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 10)
[     9.676] (**) Option "xkb_rules" "evdev"
[     9.676] (**) Option "xkb_model" "evdev"
[     9.676] (**) Option "xkb_layout" "us"
[     9.676] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event7)
[     9.677] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[     9.677] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[     9.677] (**) Logitech USB Laser Mouse: always reports core events
[     9.677] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event7"
[     9.677] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc062
[     9.677] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[     9.677] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[     9.677] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[     9.677] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[     9.677] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[     9.677] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[     9.677] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[     9.677] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     9.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input7/event7"
[     9.677] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 11)
[     9.677] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[     9.677] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[     9.677] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[     9.677] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[     9.677] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[     9.677] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[     9.677] (II) No input driver specified, ignoring this device.
[     9.677] (II) This device may have been added with another device file.
[     9.677] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[     9.677] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.677] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     9.677] (**) AT Translated Set 2 keyboard: always reports core events
[     9.677] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[     9.677] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     9.677] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     9.677] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     9.677] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[     9.677] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     9.677] (**) Option "xkb_rules" "evdev"
[     9.677] (**) Option "xkb_model" "evdev"
[     9.677] (**) Option "xkb_layout" "us"
[     9.678] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/event8)
[     9.678] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[     9.678] (II) Using input driver 'evdev' for 'PS/2 Logitech Wheel Mouse'
[     9.678] (**) PS/2 Logitech Wheel Mouse: always reports core events
[     9.678] (**) evdev: PS/2 Logitech Wheel Mouse: Device: "/dev/input/event8"
[     9.678] (--) evdev: PS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x1
[     9.678] (--) evdev: PS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[     9.678] (--) evdev: PS/2 Logitech Wheel Mouse: Found relative axes
[     9.678] (--) evdev: PS/2 Logitech Wheel Mouse: Found x and y relative axes
[     9.678] (II) evdev: PS/2 Logitech Wheel Mouse: Configuring as mouse
[     9.678] (**) evdev: PS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[     9.678] (**) evdev: PS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     9.678] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[     9.678] (II) XINPUT: Adding extended input device "PS/2 Logitech Wheel Mouse" (type: MOUSE, id 13)
[     9.678] (II) evdev: PS/2 Logitech Wheel Mouse: initialized for relative axes.
[     9.678] (**) PS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[     9.678] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[     9.678] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[     9.678] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[     9.678] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/mouse1)
[     9.678] (II) No input driver specified, ignoring this device.
[     9.678] (II) This device may have been added with another device file.
[    10.399] (II) evdev: Power Button: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.399] (II) evdev: Video Bus: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.399] (II) evdev: Power Button: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.399] (II) evdev: Sleep Button: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.399] (II) evdev: 1.3M WebCam: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.399] (II) evdev: Logitech USB Laser Mouse: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.399] (II) evdev: AT Translated Set 2 keyboard: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.399] (II) evdev: PS/2 Logitech Wheel Mouse: Close
[    10.399] (II) UnloadModule: "evdev"
[    10.425] Server terminated successfully (0). Closing log file.


... and here my kdm.log:

Code:


********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************


X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.32-std310-amd64 x86_64 Gentoo
Current Operating System: Linux localhost 3.5.7-gentoo #7 Sat Nov 3 09:46:02 CET 2012 x86_64
Kernel command line: root=/dev/sda3 rootfstype=ext4 quiet CONSOLE=tty1
Build Date: 02 November 2012  08:08:04PM
 
Current version of pixman: 0.26.0
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 09:21:50 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
klauncher(2038) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2032)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(2032)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  62 (X_CopyArea)
  Resource id in failed request:  0x0
  Serial number of failed request:  551
  Current serial number in output stream:  683
Server terminated successfully (0). Closing log file.

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.32-std310-amd64 x86_64 Gentoo
Current Operating System: Linux localhost 3.5.7-gentoo #7 Sat Nov 3 09:46:02 CET 2012 x86_64
Kernel command line: root=/dev/sda3 rootfstype=ext4 quiet CONSOLE=tty1
Build Date: 02 November 2012  08:08:04PM
 
Current version of pixman: 0.26.0
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 09:37:52 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
klauncher(1821) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1815)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(1815)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  62 (X_CopyArea)
  Resource id in failed request:  0x0
  Serial number of failed request:  550
  Current serial number in output stream:  682
Server terminated successfully (0). Closing log file.

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.32-std310-amd64 x86_64 Gentoo
Current Operating System: Linux localhost 3.5.7-gentoo #8 Sat Nov 3 09:52:23 CET 2012 x86_64
Kernel command line: root=/dev/sda3 rootfstype=ext4 quiet CONSOLE=tty1
Build Date: 02 November 2012  08:08:04PM
 
Current version of pixman: 0.26.0
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 10:03:13 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
klauncher(1842) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1836)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(1836)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  62 (X_CopyArea)
  Resource id in failed request:  0x0
  Serial number of failed request:  549
  Current serial number in output stream:  681
Server terminated successfully (0). Closing log file.

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.32-std310-amd64 x86_64 Gentoo
Current Operating System: Linux localhost 3.5.7-gentoo #9 Sat Nov 3 10:04:06 CET 2012 x86_64
Kernel command line: root=/dev/sda3 rootfstype=ext4 quiet CONSOLE=tty1
Build Date: 02 November 2012  08:08:04PM
 
Current version of pixman: 0.26.0
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 10:04:40 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
klauncher(1812) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1806)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(1806)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  62 (X_CopyArea)
  Resource id in failed request:  0x0
  Serial number of failed request:  550
  Current serial number in output stream:  682
Server terminated successfully (0). Closing log file.

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.32-std310-amd64 x86_64 Gentoo
Current Operating System: Linux localhost 3.5.7-gentoo #9 Sat Nov 3 10:04:06 CET 2012 x86_64
Kernel command line: root=/dev/sda3 rootfstype=ext4 i915.modesetting=1 quiet CONSOLE=tty1
Build Date: 02 November 2012  08:08:04PM
 
Current version of pixman: 0.26.0
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 10:05:40 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
klauncher(1834) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1828)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(1828)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  62 (X_CopyArea)
  Resource id in failed request:  0x0
  Serial number of failed request:  550
  Current serial number in output stream:  682
Server terminated successfully (0). Closing log file.

X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.32-std310-amd64 x86_64 Gentoo
Current Operating System: Linux localhost 3.5.7-gentoo #9 Sat Nov 3 10:04:06 CET 2012 x86_64
Kernel command line: root=/dev/sda3 rootfstype=ext4 quiet CONSOLE=tty1
Build Date: 02 November 2012  08:08:04PM
 
Current version of pixman: 0.26.0
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  3 10:11:45 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
klauncher(1827) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1821)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(1821)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  62 (X_CopyArea)
  Resource id in failed request:  0x0
  Serial number of failed request:  549
  Current serial number in output stream:  681
Server terminated successfully (0). Closing log file.
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Sun Nov 04, 2012 1:45 am    Post subject: Reply with quote

Another snippet of error messages which come up with every application I try to run:

Code:

  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadPixmap (invalid Pixmap parameter) 4
  Major opcode: 56 (X_ChangeGC)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
  Major opcode: 62 (X_CopyArea)
  Resource id:  0x0
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Sun Nov 04, 2012 3:56 pm    Post subject: Reply with quote

Meanwhile I've got no errors is Xorg.0.log or kdm.log. Only the messages above.
Back to top
View user's profile Send private message
gerard82
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2225
Location: Netherlands

PostPosted: Sun Nov 04, 2012 4:48 pm    Post subject: Reply with quote

Quote:
Meanwhile I've got no errors is Xorg.0.log or kdm.log. Only the messages above.

Do you mean kde is running alright?
The messages in .xsession-errors are mostly nonsense and usually can be disregarded.
I wish kde would clean this up.In kde3 I had always less than 1KB errors,now it sometimes is 100KB but running ok.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Sun Nov 04, 2012 5:14 pm    Post subject: Reply with quote

No, the desktop is still nearly useless. Only Firefox and Thunderbird work normally. Everything Kde related ist screwed somehow. Reading some posts about those error messages when starting an application from console are all about something Qt related.
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Sun Nov 04, 2012 6:47 pm    Post subject: Reply with quote

This is what dbus comes up with:

Code:

 # dbus-monitor --session
Failed to open connection to session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Back to top
View user's profile Send private message
gerard82
Advocate
Advocate


Joined: 04 Jan 2004
Posts: 2225
Location: Netherlands

PostPosted: Sun Nov 04, 2012 6:58 pm    Post subject: Reply with quote

There's something wrong with your system,hard to tell what.
Follow the handbook to re-install and don't skip over things.
Gerard.
_________________
To install Gentoo I use sysrescuecd.Based on Gentoo,has firefox to browse Gentoo docs and mc to browse (and edit) files.
The same disk can be used for 32 and 64 bit installs.
You can follow the Handbook verbatim.
http://www.sysresccd.org/Download
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Tue Nov 06, 2012 5:46 am    Post subject: Reply with quote

Ok. Fresh install sticking strictly to the handbook.

- on startup KDM crashes
- Desktop only comes up with startx
- only usable programms are Thunderbird and Firefox, the rest isn't usable because everything is garbled somehow.

Meanwhile I'm beginning to believe that either I'm making an absolutely stupid mistake or I don't know what I ran into.
Back to top
View user's profile Send private message
Yamakuzure
Veteran
Veteran


Joined: 21 Jun 2006
Posts: 1374
Location: Bardowick, Germany

PostPosted: Tue Nov 06, 2012 11:46 am    Post subject: Reply with quote

Tolstoi wrote:
... and here my kdm.log:
Code:
(...)klauncher(2038) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2032)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(2032)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
QNativeImage: Unable to attach to shared memory segment.
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  62 (X_CopyArea)
  Resource id in failed request:  0x0
  Serial number of failed request:  551
  Current serial number in output stream:  683
Server terminated successfully (0). Closing log file.
(...)
Without dbus it won't work.
Further "QNativeImage" looks like you are using the native backend for qt4, please try "raster". Everything is garbled on my system, too, when I switch to native. ("eselect qtgraphicssystem" and "systemsettings -> desktop effects")
Then an opcode "X_CopyArea" is bad. This is just a shot in the dark, but did you enable KMS for your kernel and the relevant AGP/DRI sections? Is MTRR activated? Like this:
Code:
sed-notebook ~ # egrep "(MTRR=|KMS|965|AGP|DRM)" /usr/src/linux/.config | grep -v "#"
CONFIG_MTRR=y
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=

_________________
I *do* know that I easily aggravate people due to my condensed writing. Rule of thumb: If I wrote anything that can be understood in two different ways, and one way offends you, then I meant the other! ;)
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Tue Nov 06, 2012 12:30 pm    Post subject: Reply with quote

Thanks, but I can't use the KDE desktop setting because I can't use the settings because of the garbled graphics. I'll try the eselect thing.
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Wed Nov 07, 2012 6:15 am    Post subject: Reply with quote

My settings in "eselect qtgraphicssystem list" showed "raster" as default. Trying opengl ended up with the same weird graphics again which remind me of the times where the KDE desktop was set to direct rendering you had to disable it to have a usable desktop if you didn't have the capable hardware for it.
Setting it to native worked for about 20 minutes. Anyhow Yamakuzure, I've now got perspective where to begin with. BTW, Yamakuzure, I'm from Hamburg as well.
Back to top
View user's profile Send private message
Tolstoi
l33t
l33t


Joined: 20 May 2004
Posts: 645

PostPosted: Thu Nov 08, 2012 8:53 am    Post subject: Reply with quote

Well, after a little help from this thread: http://forums.gentoo.org/viewtopic-t-941366.html I got everything up and running again. Magic_SysRq_Key probably did the trick. But before I noticed some improvement by upgrading packages (mesa and so on) and playing with mesa settings classic/gallium and qtgraphics native/opengl/raster.

At the moment, that is what works here is setting mesa to classic, qtgraphics to native. In the Systemsettings I've got OpenGL and Native and OpenGL2 enabled.

I'm happy with that for now and have no desire at the moment to check all those possible combinations between mesa/qtgraphics and Systemsettings KDE :) .
Back to top
View user's profile Send private message
Yamakuzure
Veteran
Veteran


Joined: 21 Jun 2006
Posts: 1374
Location: Bardowick, Germany

PostPosted: Thu Nov 08, 2012 7:40 pm    Post subject: Reply with quote

Congratulations! :)
_________________
I *do* know that I easily aggravate people due to my condensed writing. Rule of thumb: If I wrote anything that can be understood in two different ways, and one way offends you, then I meant the other! ;)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum