View previous topic :: View next topic |
Author |
Message |
steelblue93 n00b
Joined: 11 Jul 2014 Posts: 6 Location: United States
|
Posted: Fri Jul 11, 2014 4:53 pm Post subject: Tp-link Wifi Adapter Problem (Solved) |
|
|
I'm having some difficulty getting my usb wifi adapter to perform well. The same hardware booted into windows works great but in linux I'm seeing massive delays. Hopefully I've just configured something wrong. I'm using wicd although I've used wpa_supplicant and get the same results. A couple screenshots capture the problem:
On linux:
http://postimg.org/image/5do4uyqdr/
Meanwhile, over in windows land:
http://postimg.org/image/yeyrurjab/
Various info:
Code: | steelblue ~ # ifconfig
enp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:25:22:f5:f3:f7 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 1977 bytes 180059 (175.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1977 bytes 180059 (175.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp0s22f2u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.5 netmask 255.255.255.0 broadcast 192.168.2.255
ether 54:e6:fc:95:a8:78 txqueuelen 10 (Ethernet)
RX packets 33245 bytes 26756557 (25.5 MiB)
RX errors 0 dropped 28 overruns 0 frame 0
TX packets 32901 bytes 12744455 (12.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
Code: | steelblue ~ # iwconfig
wlp0s22f2u2 IEEE 802.11bgn ESSID:"Skynet1"
Mode:Managed Frequency:2.412 GHz Access Point: B4:75:0E:EE:B6:A7
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=53/70 Signal level=-57 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:2511 Missed beacon:0
|
Code: | steelblue ~ # dmesg | grep ath
[ 3.764006] md: multipath personality registered for level -4
[ 11.762163] usb 3-2: ath9k_htc: Firmware htc_9271.fw requested
[ 11.762188] usbcore: registered new interface driver ath9k_htc
[ 12.255138] usb 3-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 12.492073] ath9k_htc 3-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 12.722798] ath9k_htc 3-2:1.0: ath9k_htc: FW Version: 1.3
[ 12.722801] ath: EEPROM regdomain: 0x809c
[ 12.722802] ath: EEPROM indicates we should expect a country code
[ 12.722803] ath: doing EEPROM country->regdmn map search
[ 12.722804] ath: country maps to regdmn code: 0x52
[ 12.722805] ath: Country alpha2 being used: CN
[ 12.722805] ath: Regpair used: 0x52
|
Code: | steelblue ~ # lsmod | grep ath
ath9k_htc 52818 0
ath9k_common 8382 1 ath9k_htc
ath9k_hw 388091 2 ath9k_common,ath9k_htc
ath 18923 3 ath9k_common,ath9k_htc,ath9k_hw
mac80211 277734 1 ath9k_htc
cfg80211 208945 4 ath,ath9k_common,mac80211,ath9k_htc
multipath 6247 0
usbcore 158916 13 yealink,uhci_hcd,snd_usb_audio,usb_storage,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,ath9k_htc,xhci_hcd,sl811_hcd
|
Last edited by steelblue93 on Tue Jul 15, 2014 9:13 pm; edited 1 time in total |
|
Back to top |
|
|
steelblue93 n00b
Joined: 11 Jul 2014 Posts: 6 Location: United States
|
Posted: Fri Jul 11, 2014 5:25 pm Post subject: |
|
|
Some more info:
Code: |
Speed test statistics
---------------------
Download speed: 180 kbps
Upload speed: 1104 kbps
Download consistency of service: 31 %
Upload consistency of service: 90 %
Download test type: socket
Upload test type: socket
Maximum TCP delay: 970 ms
Average download pause: 163 ms
Minimum round trip time to server: 33 ms
Average round trip time to server: 42 ms
Estimated download bandwidth: 811 kbps
Route concurrency: 4.492425
Download TCP forced idle: 0 %
Maximum route speed: 15887 kbps
TCP MTU: 1492
Pkts Norder: 87
Bytes Norder : 124880
Pkts XWindow: 0
Bytes XWindow: 0
Pkts Dup: 0
Bytes Dup: 0
Pkts Part Dup: 0
Bytes Part Dup: 0
Pkts CRC errors: 0
Pkts bad offset: 0
Pkts too short: 0
Wnd probes recvd: 0
Zero Wnd updates: 0
Bytes lost: 5808
Retransmit timeouts: 8
Fast Retransmits: 1
Packets retransmitted: 22
Bytes retransmitted: 31944
Send Wnd Closed: 0
Pure Wnd Updates: 1
Acks for unsent: 0
Dup acks: 21
Wnd probes sent: 0
Persist timeouts: 0
|
Also, I didn't change any QoS setting:
Code: | steelblue ~ # tc qdisc show
qdisc pfifo_fast 0: dev enp1s0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
qdisc mq 0: dev wlp0s22f2u2 root
qdisc pfifo_fast 0: dev wlp0s22f2u2 parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
qdisc pfifo_fast 0: dev wlp0s22f2u2 parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
qdisc pfifo_fast 0: dev wlp0s22f2u2 parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
qdisc pfifo_fast 0: dev wlp0s22f2u2 parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 |
|
|
Back to top |
|
|
steelblue93 n00b
Joined: 11 Jul 2014 Posts: 6 Location: United States
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|